Hey I got a Question??? After market Gauges???

Jeffwb2006 · May 11th, 2008, 02:56 PM

Hey I have a 1991 Ford Mustang 2.3L and I have two after market gauges for it. The frist is an Oil PSI gauge, and the other one is a temp gauge. Does anyone know where they are suposed to hook up on the motor at? Cause they came with the car, and they wherer only hooked up to light up.

TurboLX · May 12th, 2008, 09:42 PM

in the side of the head, on the right side of the engine behine intake runner #4 there is a small sending unit for the stock oil temp, remove that and thread the new one in there. thats for oil pressure

for engine temp, if you look down a liitl farter you should see the same thing except its on the block, remove that and thread the new one in

Jeffwb2006 · May 15th, 2008, 07:23 PM

Does anyone haave a picutre or anything, cause the temp gauge is hooked to the motor but I am not sure if it is hooked in the right place.

HMUSN · May 15th, 2008, 07:29 PM

well turn the motor over and see if your gauge works..

Jeffwb2006 · May 17th, 2008, 12:33 PM

but thats the thing I hav already drove the car about forty miles and the gauge hasn't worked yet I mean the one on the dash kinda worked but the other gauge I have didn't move at all

akatagyourit · May 17th, 2008, 07:13 PM

These are the stock sensor locations on the driver side of the block right next to the intake and oil filter. I marked what is what for you. Hope this helps.

May 11th, 2008, 02:56 PM	#1
Jeffwb2006 Newbie 1991 Mustang Lx 2.3l ?????? Join Date: Apr 2008 Location: Roanoke Posts: 5	Hey I got a Question??? After market Gauges??? Hey I have a 1991 Ford Mustang 2.3L and I have two after market gauges for it. The frist is an Oil PSI gauge, and the other one is a temp gauge. Does anyone know where they are suposed to hook up on the motor at? Cause they came with the car, and they wherer only hooked up to light up.

May 12th, 2008, 09:42 PM	#2
TurboLX Site Moderator 1990 Mustang LX Turbo 8.67@165.91 mph Join Date: Oct 2006 Location: New York Posts: 8,229	in the side of the head, on the right side of the engine behine intake runner #4 there is a small sending unit for the stock oil temp, remove that and thread the new one in there. thats for oil pressure for engine temp, if you look down a liitl farter you should see the same thing except its on the block, remove that and thread the new one in __________________ Wiring Diagrams, TSB's, OBD Service Codes and Engine Diagrams Available. PM For Info Myspace

Threads Similar to: Hey I got a Question??? After market Gauges???
Thread	Thread Starter	Forum	Replies	Last Post
hey ya'll i have a camaro question	atlacatl213	The Clubhouse	5	April 27th, 2008 10:23 PM
question on autometer gauges.	dcrow	99-04	4	December 30th, 2007 01:56 PM
Installing Elec After Market Gauges	mustang44	V6 Mustangs	2	November 18th, 2006 05:56 PM
Auto-Meter Nexus Gauges Question.	Hennessey-ShelbyGT500	Modular Mustangs	0	September 19th, 2006 09:38 AM
Hey Im New Here And Have An Exhaust Question	ashskyler	V6 Mustangs	9	September 7th, 2006 09:07 PM

May 15th, 2008, 07:23 PM	#3
Jeffwb2006 Newbie 1991 Mustang Lx 2.3l ?????? Join Date: Apr 2008 Location: Roanoke Posts: 5	Does anyone haave a picutre or anything, cause the temp gauge is hooked to the motor but I am not sure if it is hooked in the right place.

May 17th, 2008, 12:33 PM	#5
Jeffwb2006 Newbie 1991 Mustang Lx 2.3l ?????? Join Date: Apr 2008 Location: Roanoke Posts: 5	but thats the thing I hav already drove the car about forty miles and the gauge hasn't worked yet I mean the one on the dash kinda worked but the other gauge I have didn't move at all

All times are GMT -4. The time now is 05:19 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.