Me + BMW M5 @ 150mph = bye bye engine!

VegasGT · December 27th, 2006, 11:16 PM

Well it finally happened. I blew the engine after a shift from 4th at 6500rpm into 5th. I hit 5th for a bit let out of it and noticed a nice bright red oil pressure indicator. Red = 0 pressure. I pulled over and notice the engine was running but rough, I turned it off. This was Christmas night at about 10pm 40 miles inbetween each little city (Barstow and Baker, CA).

New game plan:

ST Motorsports is going to build me a iron block, forged rotating assembly, short block. I think I'll get cams while I'm apart. I told Adam to build me a motor that will be happy at 550rwhp or so and have no problems with extended time at 6,000+ rpm. He seems to have something for me.

I am a little bit different than most here, I am less into drags and more into high speed, high rpm runs.

On a positive note I put the whoopstick on a BMW M3 in the twisties in the back hills of San Diego before the whole blow up thing..hahahah!

thaztrain35 · December 28th, 2006, 12:57 AM

sucks... but lookin foward 2 ur new engine... lol and nice kill

FireryDriver · December 28th, 2006, 03:56 PM

there's this one company I'll try and find the name again but basically what they do is you send them your newly forged engine block and they like deep freeze it, causing all of the metal molecules to realign perfectly. Long story short they make your engine block or any steel product like 10x stronger and it will last ALOT longer.

VegasGT · December 31st, 2006, 03:45 PM

Originally Posted by FireryDriver

there's this one company I'll try and find the name again but basically what they do is you send them your newly forged engine block and they like deep freeze it, causing all of the metal molecules to realign perfectly. Long story short they make your engine block or any steel product like 10x stronger and it will last ALOT longer.

Ya the term is Cryo (sp). We use it on our race cars.

JohnnyZ · December 31st, 2006, 03:53 PM

iron block will hold in way too much heat especially if you're going to be reving that motor to high RPM

Drgnracin72 · December 31st, 2006, 06:10 PM

thats where you killed the motor. you took it way to much rpms. they run out of fuel at 6200 once they are boosted, thats what kills them is over revving them and thats to much on the boosted stock motor

VegasGT · January 1st, 2007, 05:24 PM

Originally Posted by drgnracin72

thats where you killed the motor. you took it way to much rpms. they run out of fuel at 6200 once they are boosted, thats what kills them is over revving them and thats to much on the boosted stock motor

I have enough fuel at 6500rpm on the last 40 dyno runs but hey maybe something changes on the street.

ChrisJ · January 2nd, 2007, 01:23 AM

How much power were you making out of it?

Drgnracin72 · January 2nd, 2007, 01:05 PM

and what kind of dyno where you on. becasue under a load things change and if you werent dynod on a mustang dyno you were not tested under load and if thats the case, thats your problem. the factory fuelk stuff on a stock motor with blower will start leaning out around 6200.

maverick · January 5th, 2007, 12:40 PM

i'm crying but happy for you at the same time, the freezing thing get back to us on that

December 27th, 2006, 11:16 PM	#1
VegasGT Regular Join Date: Sep 2006 Posts: 60 iTrader: 0 reviews	Me + BMW M5 @ 150mph = bye bye engine! Well it finally happened. I blew the engine after a shift from 4th at 6500rpm into 5th. I hit 5th for a bit let out of it and noticed a nice bright red oil pressure indicator. Red = 0 pressure. I pulled over and notice the engine was running but rough, I turned it off. This was Christmas night at about 10pm 40 miles inbetween each little city (Barstow and Baker, CA). New game plan: ST Motorsports is going to build me a iron block, forged rotating assembly, short block. I think I'll get cams while I'm apart. I told Adam to build me a motor that will be happy at 550rwhp or so and have no problems with extended time at 6,000+ rpm. He seems to have something for me. I am a little bit different than most here, I am less into drags and more into high speed, high rpm runs. On a positive note I put the whoopstick on a BMW M3 in the twisties in the back hills of San Diego before the whole blow up thing..hahahah! __________________ '06 5 spd. 2.4 Kenne Bell tuned by www.spankintime.com, BAP, 60lb injectors, BMR springs, Hurst shifter, Flo Pro axle back, Pypes X-pipe, Axis GTRs 20x9 20x10.5.

December 28th, 2006, 12:57 AM	#2
thaztrain35 Regular Join Date: Dec 2006 Location: Miami, FL Posts: 87 iTrader: 0 reviews	sucks... but lookin foward 2 ur new engine... lol and nice kill __________________ 2008 Vista Blue GT 5spd nothing done 2 it yet =/

December 28th, 2006, 03:56 PM	#3
FireryDriver Enthusiast Join Date: Sep 2006 Location: Austin, TX Posts: 543 iTrader: 0 reviews	there's this one company I'll try and find the name again but basically what they do is you send them your newly forged engine block and they like deep freeze it, causing all of the metal molecules to realign perfectly. Long story short they make your engine block or any steel product like 10x stronger and it will last ALOT longer. __________________ SLP Loud mouths SLP x-pipe 4.10 gears K&N intake X-Cal II custom tune

December 31st, 2006, 03:53 PM	#5
JohnnyZ Enthusiast 2011 5.0L Mustang GT 7.01@100mph Join Date: Nov 2006 Location: Wellington, Florida Posts: 660 iTrader: 0 reviews	iron block will hold in way too much heat especially if you're going to be reving that motor to high RPM __________________ 2011 5.0L Mustang GT - Powered by HELLION / Tuned by BLOW BY RACING

December 31st, 2006, 06:10 PM	#6
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	thats where you killed the motor. you took it way to much rpms. they run out of fuel at 6200 once they are boosted, thats what kills them is over revving them and thats to much on the boosted stock motor __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

January 2nd, 2007, 01:23 AM	#8
ChrisJ RLY SRS Join Date: Aug 2005 Location: Ft. Meade, MD Posts: 36,743 Blog Entries: 4 iTrader: 9 reviews	How much power were you making out of it? __________________ 2008 Acura TL Type-S - 2008 EB Ford Expedition - 2002 Boosted GT - Sold Facebook Google+

January 2nd, 2007, 01:05 PM	#9
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	and what kind of dyno where you on. becasue under a load things change and if you werent dynod on a mustang dyno you were not tested under load and if thats the case, thats your problem. the factory fuelk stuff on a stock motor with blower will start leaning out around 6200. __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

January 5th, 2007, 12:40 PM	#10
maverick Regular Join Date: Oct 2006 Location: Arizona Posts: 200 iTrader: 0 reviews	i'm crying but happy for you at the same time, the freezing thing get back to us on that __________________ LOOKIN' FOR MY "MUSTANG SALLY!" . . . . . . ARE YOU OUT THERE?

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Me + BMW M5 @ 150mph = bye bye engine!
Thread	Thread Starter	Forum	Replies	Last Post
Engine Build Up or Engine Replacement...	OcOnnor220	99-04	8	July 27th, 2008 04:54 PM
Build up or buy crate engine?? Where to go for crate engine	cgb6810	5.0 Mustangs	17	October 27th, 2007 11:33 PM
1990 GT NO Engine Will 96 4.6 licolin town car engine FIT??	zygo4406	5.0 Mustangs	10	June 4th, 2007 06:53 AM
Swapping '99 v6 engine with '02 v6 engine	elmills	V6 Mustangs	63	May 25th, 2007 03:13 PM
Will a 2002 Gt Engine Directly Replace a 2000GT engine?	Bigb2000GT	99-04	7	April 22nd, 2007 06:09 PM

All times are GMT -4. The time now is 04:52 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.