Just ordered cams & I have a question

mrbill4 · February 13th, 2009, 09:35 PM

I just ordered comp cams stage 1 NSR blower grind late today from Rad Mustangs & to my pleasant surprise I received a message they're already being delivered. I know they're only stage 1, but that was my decision. My question is: Does anyone else out there have them or does anyone have a vid you can attach so I can get somewhat of an idea on how they're going to sound?

qwik48r · February 13th, 2009, 09:39 PM

what lsa are they ground on?

mrbill4 · February 15th, 2009, 03:50 PM

I found three stage 1's

Mickey · February 15th, 2009, 05:44 PM

Hate to break it to you but your car will not sound too cammed.

06GTMustang89 · February 15th, 2009, 06:15 PM

as what mickey said they are going to sound identical to stock cams...

unlicensed to drive · February 15th, 2009, 06:30 PM

Get at least VSR Stg 2

Mickey · February 15th, 2009, 07:04 PM

Not many people like to swap out the springs mustangfan...the stage II NSR's are a good cam too

unlicensed to drive · February 15th, 2009, 07:07 PM

Oh, but I was saying that get VSR or bigger to actually hear the cam.

Mickey · February 15th, 2009, 07:11 PM

You can definitely tell that a car with the NSR stage II's is cammed...

unlicensed to drive · February 15th, 2009, 07:21 PM

Oh then I stand corrected. Can u get on AIM Mickey?

07stanggt · February 16th, 2009, 10:21 AM

Originally Posted by 06GTMustang89

as what mickey said they are going to sound identical to stock cams...

I bet they idle like the stage II nsr cams. Which do not idle like stock.

chad05gt · February 16th, 2009, 10:59 AM

VSR Stage II's sound very stockish; even with heads.

Mickey · February 16th, 2009, 12:15 PM

SPR's don't

unlicensed to drive · February 16th, 2009, 01:04 PM

Thats why I want them.

07 STROKER · February 16th, 2009, 01:18 PM

NSR's stage two.

mustang2008011.flv video by 07procharger - Photobucket

Mickey · February 16th, 2009, 01:32 PM

I couldnt hear them

07 STROKER · February 16th, 2009, 01:43 PM

you wont...they are very close to stock, but there is a diffence...just not alot...And thats why I love them...I like sounding stock and killing everyone around.

07stanggt · February 16th, 2009, 01:47 PM

exhuast setup and tune have a lot to do with this. Remember the vid with my and a x compared to a H pipe. Big difference.

Mickey · February 16th, 2009, 02:19 PM

stop yelling richard

unlicensed to drive · February 16th, 2009, 04:08 PM

07Procharger's car sounds very similar to mine, maybe just a bit different.

February 13th, 2009, 09:35 PM	#1
mrbill4 Regular 2007 Mustang GT Join Date: Mar 2007 Location: Lebanon, Pa. Posts: 95 iTrader: 0 reviews	Just ordered cams & I have a question I just ordered comp cams stage 1 NSR blower grind late today from Rad Mustangs & to my pleasant surprise I received a message they're already being delivered. I know they're only stage 1, but that was my decision. My question is: Does anyone else out there have them or does anyone have a vid you can attach so I can get somewhat of an idea on how they're going to sound? __________________ Roush SC/73mm pulley, Comp NSR Stage1 blwr grind, Steeda CAI, GT500 dual fuel pump, X Cal 2, Dynatech LT headers cated X, Borla Stingers, Roush short throw /Strut Brace, aluminum driveshaft, FRPP anti-roll bars, GT500 rear LCA's, steeda adj pan hard Last edited by mrbill4; February 14th, 2009 at 02:38 PM.

February 13th, 2009, 09:39 PM	#2
qwik48r MM Fanatic alotta shit no fat girls fast Join Date: Jan 2008 Location: in the woods Posts: 3,681 iTrader: 1 reviews	what lsa are they ground on? __________________ mind your business what i drive... i'm on a fucking mustang forum. qwik's build

February 15th, 2009, 03:50 PM	#3
mrbill4 Regular 2007 Mustang GT Join Date: Mar 2007 Location: Lebanon, Pa. Posts: 95 iTrader: 0 reviews	cam vids I found three stage 1's __________________ Roush SC/73mm pulley, Comp NSR Stage1 blwr grind, Steeda CAI, GT500 dual fuel pump, X Cal 2, Dynatech LT headers cated X, Borla Stingers, Roush short throw /Strut Brace, aluminum driveshaft, FRPP anti-roll bars, GT500 rear LCA's, steeda adj pan hard

February 15th, 2009, 05:44 PM	#4
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	Hate to break it to you but your car will not sound too cammed. __________________ Under Construction

February 15th, 2009, 06:15 PM	#5
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,178 iTrader: 0 reviews	as what mickey said they are going to sound identical to stock cams... __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

February 15th, 2009, 06:30 PM	#6
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	Get at least VSR Stg 2

February 15th, 2009, 07:04 PM	#7
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	Not many people like to swap out the springs mustangfan...the stage II NSR's are a good cam too __________________ Under Construction

February 15th, 2009, 07:07 PM	#8
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	Oh, but I was saying that get VSR or bigger to actually hear the cam.

February 15th, 2009, 07:11 PM	#9
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	You can definitely tell that a car with the NSR stage II's is cammed... __________________ Under Construction

February 15th, 2009, 07:21 PM	#10
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	Oh then I stand corrected. Can u get on AIM Mickey?

February 16th, 2009, 12:15 PM	#13
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	SPR's don't __________________ Under Construction

February 16th, 2009, 01:04 PM	#14
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	Thats why I want them.

February 16th, 2009, 01:32 PM	#16
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	I couldnt hear them __________________ Under Construction

February 16th, 2009, 01:43 PM	#17
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	you wont...they are very close to stock, but there is a diffence...just not alot...And thats why I love them...I like sounding stock and killing everyone around. __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

February 16th, 2009, 01:47 PM	#18
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,950 iTrader: 1 reviews	exhuast setup and tune have a lot to do with this. Remember the vid with my and a x compared to a H pipe. Big difference.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

February 16th, 2009, 02:19 PM	#19
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	stop yelling richard __________________ Under Construction

February 16th, 2009, 04:08 PM	#20
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	07Procharger's car sounds very similar to mine, maybe just a bit different.

Threads Similar to: Just ordered cams & I have a question
Thread	Thread Starter	Forum	Replies	Last Post
I ordered my cams today!	RAGEman	99-04	5	February 1st, 2009 01:27 AM
great news.... ordered cams today!! HiTech stage 2s!!	qwick04gt	99-04	27	January 29th, 2009 01:14 AM
just ordered! (cams)	mustangrebuilder	2005 - 2010	13	May 23rd, 2008 06:04 PM
Just ordered my cams	GTsetGO	94-95	10	April 12th, 2006 08:51 AM

All times are GMT -4. The time now is 07:48 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

Just ordered cams & I have a question

Just ordered cams & I have a question

cam vids