Headers for an Automatic?

jerrytubbs1 · March 19th, 2009, 06:38 PM

I'll get you pics with it on my car tomorrow. By modify, do you mean put another piece of pipe to it to make it long enough? If thats what you are talking about, then yes when I send it out to you,it does NOT have to be modified. The end(ball flange) hooks to the headers and the other end hooks directly into the x-pipe.

jerrytubbs1 · March 19th, 2009, 06:44 PM

Originally Posted by RetroGT2006

Yeah?? Can you find me a link?? Do they sound good with Flowmaster American Thunders?? Also, is there clearance issues? I have a 06 GT lowered on FRPP Springs (1.5in drop all around).. car sits on 18s and has an auto.. Do not know if that info is needed or not at all.. but i just duno how it will hang.. if itll be too low or iight. I assume for 700- those headers are NOT stainless steel? Either way, if you can post me the link.. That may be a better option then spending $478 on 8000k HIDS for head and fog lights.. Put this tax return money to better use. What hp you think i can gain?? I do not just want sound, with a little power.. Is it going to get a good 18-20rwhp???

I cant post a link here, but if you go to s197 forums under the classifieds, then you can see the post with the headers and x forsale.Also the direct fit pro chamber I sell for 285 shipped....So headers and direct fit pro chamber can be had for 710 shipped...or headers and o/r x is 629 shipped from me to you....and it is a direct fit x pipe.......The headers are ceramic coated

navyman8903 · March 19th, 2009, 06:50 PM

can you pm me that link to the thread jerry...

RetroGT2006 · March 19th, 2009, 06:54 PM

Originally Posted by NastyStang113

Nothing sounds good with Flowmasters ...

Originally Posted by Mickey

You guys suck, i cant just pull them off.. I have no money to replace the mufflers.. lol i had slp lm's..then these.

Mickey · March 19th, 2009, 06:59 PM

were just teasin ya dude...but i would swap them out when you get the dough unless you are satisfied with them

RetroGT2006 · March 19th, 2009, 07:01 PM

Originally Posted by Mickey

were just teasin ya dude...but i would swap them out when you get the dough unless you are satisfied with them

will it sound raspy or ricey?? also yeah- i want magapacks...

Mickey · March 19th, 2009, 07:05 PM

Anything sounds good with a prochamber...prochambers are very clean and very deep

jerrytubbs1 · March 19th, 2009, 07:06 PM

With the o/r x it will sound raspier,but not like a ricer lol

With the pro chamber it is deeper more throatier lol

RetroGT2006 · March 19th, 2009, 07:07 PM

Originally Posted by Mickey

Anything sounds good with a prochamber...prochambers are very clean and very deep

Deep is good, that is what i am aiming for..

Originally Posted by jerrytubbs1

With the o/r x it will sound raspier,but not like a ricer lol

With the pro chamber it is deeper more throatier lol

Thats the word i meant to type, not ricey... i just hate raspy..

jerrytubbs1 · March 19th, 2009, 07:09 PM

Then you need to get the pro chamber it is a very nice sound.

Mickey · March 19th, 2009, 07:09 PM

Originally Posted by RetroGT2006

Deep is good, that is what i am aiming for..

sig'd

navyman8903 · March 19th, 2009, 07:11 PM

it sounds amazing.....sorry mickey I have to post this vid Till I get sick of it.

YouTube - Cammed 06 Saleen 3V takeoff/flyby

Mickey · March 19th, 2009, 07:14 PM

Originally Posted by navyman8903

it sounds amazing.....sorry mickey I have to post this vid Till I get sick of it.
YouTube - Cammed 06 Saleen 3V takeoff/flyby

that vid only sounds good if you have LOUD speakers...

07stanggt · March 19th, 2009, 07:58 PM

Originally Posted by jerrytubbs1

I cant post a link here, but if you go to s197 forums under the classifieds, then you can see the post with the headers and x forsale.Also the direct fit pro chamber I sell for 285 shipped....So headers and direct fit pro chamber can be had for 710 shipped...or headers and o/r x is 629 shipped from me to you....and it is a direct fit x pipe.......The headers are ceramic coated

Jerry can i ask you a question without offending you? "The direct fit prochamber"....by name is part number pc2105 its a splice in prochamber to the stock cats, it doesnt have legs to the long tubes. In essence they dont work togethter And again the term direct fit x pipe, refers to a splice in x pipe that has no legs to hook up to the long tubes, it is meant to be attached to the stock down legs. The prochamber that mounts to the long tubes is pc4605, and it cost more then 285, for a distributor to buy. Are you sure on your parts numbers? Becuase if you are selling pc4605 which is the prochamber to the mac long tubes, with the legs included, shipped for 285, ill buy some of them from you right now.

Mac Performance - performance accessories for cars, trucks, and motorcycles

jerrytubbs1 · March 19th, 2009, 08:25 PM

You are correct sir on everything.
I am not talking about how you buy them from Mac, I am talking about how you receive them from me. Like I said, we have put them on my car and other local cars here and when we send the kit out, you basically just bolt it up to the lt's. There is no need to modify by the customer. In other words, you get the legs mounted to the pro chamber kit or o/r x so it will work.

As far as the pro chamber that goes to the header(4605) your correct again, we pay more than 285 at our price.And I'm not pricing that part # for the 285.
Like I said, as long as my car is back together tomorrow, I'll send ya some pics and you can see what I'm talking about......And no sir you didnt offend me. People needs to learn that communication is the key to answers....So feel free to ask me anything.

07stanggt · March 19th, 2009, 08:35 PM

Originally Posted by jerrytubbs1

You are correct sir on everything.
I am not talking about how you buy them from Mac, I am talking about how you receive them from me. Like I said, we have put them on my car and other local cars here and when we send the kit out, you basically just bolt it up to the lt's. There is no need to modify by the customer. In other words, you get the legs mounted to the pro chamber kit or o/r x so it will work.

As far as the pro chamber that goes to the header(4605) your correct again, we pay more than 285 at our price.And I'm not pricing that part # for the 285.
Like I said, as long as my car is back together tomorrow, I'll send ya some pics and you can see what I'm talking about......And no sir you didnt offend me. People needs to learn that communication is the key to answers....So feel free to ask me anything.

No need to send pics, im very familar with mac stuff.

what is your website address?

RetroGT2006 · March 20th, 2009, 12:42 AM

Originally Posted by Mickey

sig'd

Hahahaha, that was a good quote. Worthy sig material = )..

Originally Posted by navyman8903

it sounds amazing.....sorry mickey I have to post this vid Till I get sick of it.
YouTube - Cammed 06 Saleen 3V takeoff/flyby

I love how that sounds!!!!

Mickey · March 20th, 2009, 01:31 AM

Originally Posted by RetroGT2006

Hahahaha, that was a good quote. Worthy sig material = )..

I love how that sounds!!!!

Ill get better video of my car when I get it back...Ill have my roommates camera

RetroGT2006 · March 20th, 2009, 02:06 AM

Shit! for under $100 is a steal!!! When we guess does it have to be correct or is it whose closest??

Mickey · March 20th, 2009, 02:58 AM

closest overall b/w hp and tq

March 19th, 2009, 06:59 PM	#25
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	were just teasin ya dude...but i would swap them out when you get the dough unless you are satisfied with them __________________ Under Construction

March 19th, 2009, 07:05 PM	#27
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	Anything sounds good with a prochamber...prochambers are very clean and very deep __________________ Under Construction

March 20th, 2009, 02:06 AM	#39
RetroGT2006 Enthusiast 2006 Mustang GT Join Date: Jan 2008 Location: Windermere,Florida Posts: 956 iTrader: 0 reviews	Shit! for under $100 is a steal!!! When we guess does it have to be correct or is it whose closest?? __________________ Daily Driver: 2006 Honda CBR600rr Weekend Warrior: 2006 Mustang GT

March 20th, 2009, 02:58 AM	#40
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	closest overall b/w hp and tq __________________ Under Construction

Threads Similar to: Headers for an Automatic?
Thread	Thread Starter	Forum	Replies	Last Post
2002 GT automatic headers and X-pipe	CW5billwade	99-04	6	December 22nd, 2008 07:19 AM
kb on automatic?	Saleenssc14	99-04	1	October 13th, 2008 09:35 PM
Automatic Headers??	eLLuSioNiST	2005 - 2010	0	May 2nd, 2008 11:02 PM
(2005-2008)Long headers vs shorty Headers	RetroKid	V6 Mustangs	9	April 12th, 2008 12:14 PM
JBA Headers vs BBK headers	06GTMustang89	2005 - 2010	70	March 18th, 2008 06:59 AM

March 19th, 2009, 06:38 PM	#21
jerrytubbs1 Regular Join Date: Feb 2009 Posts: 190 iTrader: 0 reviews	I'll get you pics with it on my car tomorrow. By modify, do you mean put another piece of pipe to it to make it long enough? If thats what you are talking about, then yes when I send it out to you,it does NOT have to be modified. The end(ball flange) hooks to the headers and the other end hooks directly into the x-pipe.

March 19th, 2009, 07:06 PM	#28
jerrytubbs1 Regular Join Date: Feb 2009 Posts: 190 iTrader: 0 reviews	With the o/r x it will sound raspier,but not like a ricer lol With the pro chamber it is deeper more throatier lol

March 19th, 2009, 07:09 PM	#30
jerrytubbs1 Regular Join Date: Feb 2009 Posts: 190 iTrader: 0 reviews	Then you need to get the pro chamber it is a very nice sound.

March 19th, 2009, 08:25 PM	#35
jerrytubbs1 Regular Join Date: Feb 2009 Posts: 190 iTrader: 0 reviews	You are correct sir on everything. I am not talking about how you buy them from Mac, I am talking about how you receive them from me. Like I said, we have put them on my car and other local cars here and when we send the kit out, you basically just bolt it up to the lt's. There is no need to modify by the customer. In other words, you get the legs mounted to the pro chamber kit or o/r x so it will work. As far as the pro chamber that goes to the header(4605) your correct again, we pay more than 285 at our price.And I'm not pricing that part # for the 285. Like I said, as long as my car is back together tomorrow, I'll send ya some pics and you can see what I'm talking about......And no sir you didnt offend me. People needs to learn that communication is the key to answers....So feel free to ask me anything.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:37 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.