All parts needed for swapping cylinder heads.

unlicensed to drive · March 19th, 2009, 03:07 PM

I need to know what parts you need for cylinder heads so I'll have everything ready for the swap when we buy them someday.

I know you need head gaskets and head studs, and you can reuse stock timing chain gaskets. But is there anything else?

Hopefully chad05gt or someone else with heads can chime in.

07stanggt · March 19th, 2009, 03:14 PM

You got heads?

unlicensed to drive · March 19th, 2009, 03:16 PM

No LOL, in my dreams, this is something I forgot to ask.

But yes I've got it all planned out. Here's my build plan, I already sent my dad a detailed email on the benificial things tied along with the mods.

1. Buy Kooks Longtube Headers and get them installed.
2. Buy C&L Intake Manifold and do it ourselves.
3. Buy Stage 2 SPR Cams/Phaser Limiters, let them sit in garage.
4. Buy Heads fully assembled(springs,locks,retainers)-reuse timing gaskets, buy new head studs/gaskets(What else do I need?), then get heads/cams installed together.

The car would be pretty much done then.

, its time for serious mods, we've had the car 2.5 years now, still just bolt ons.

unlicensed to drive · March 19th, 2009, 03:41 PM

I see you viewing this thread chad. >_>

JakeM · March 19th, 2009, 04:22 PM

You know if you used the Search function you would find, oh, about 15 threads on this very subject. Especially considering they aren't even planned for the near future.

unlicensed to drive · March 19th, 2009, 04:27 PM

I tried search function, I put cylinder head swap. Grrr

chad05gt · March 19th, 2009, 04:33 PM

PM me for better question list

" I forgot what to put here... "

BTW, very cool sig.

unlicensed to drive · March 19th, 2009, 04:35 PM

I put it because people were being beetches about me showing off my dads car

Mickey · March 19th, 2009, 07:08 PM

showing off?

unlicensed to drive · March 19th, 2009, 07:10 PM

No someone else had that sig so I used it on here. I thought it fit. >.>

unlicensed to drive · March 19th, 2009, 08:00 PM

Our car only has 10k miles FYI

March 19th, 2009, 03:07 PM	#1
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	All parts needed for swapping cylinder heads. I need to know what parts you need for cylinder heads so I'll have everything ready for the swap when we buy them someday. I know you need head gaskets and head studs, and you can reuse stock timing chain gaskets. But is there anything else? Hopefully chad05gt or someone else with heads can chime in. Last edited by unlicensed to drive; March 19th, 2009 at 03:17 PM.

March 19th, 2009, 03:16 PM	#3
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	No LOL, in my dreams, this is something I forgot to ask. But yes I've got it all planned out. Here's my build plan, I already sent my dad a detailed email on the benificial things tied along with the mods. 1. Buy Kooks Longtube Headers and get them installed. 2. Buy C&L Intake Manifold and do it ourselves. 3. Buy Stage 2 SPR Cams/Phaser Limiters, let them sit in garage. 4. Buy Heads fully assembled(springs,locks,retainers)-reuse timing gaskets, buy new head studs/gaskets(What else do I need?), then get heads/cams installed together. The car would be pretty much done then. , its time for serious mods, we've had the car 2.5 years now, still just bolt ons. Last edited by unlicensed to drive; March 19th, 2009 at 03:36 PM.

March 19th, 2009, 07:08 PM	#9
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	showing off? __________________ Under Construction

Threads Similar to: All parts needed for swapping cylinder heads.
Thread	Thread Starter	Forum	Replies	Last Post
Cylinder Heads	5.0 Junky	5.0 Mustangs	3	November 4th, 2008 03:03 PM
cylinder heads	Blk01ponyGT	99-04	2	October 7th, 2007 08:40 PM
Cylinder Heads	cbrown	99-04	6	September 6th, 2007 07:49 PM
RHS heads , are they good cylinder heads?	hitorx	5.0 Mustangs	25	May 12th, 2007 09:55 PM
cylinder heads help	95StangSVT	94-95	4	December 18th, 2006 05:59 PM

March 19th, 2009, 03:14 PM	#2
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,950 iTrader: 1 reviews	You got heads?

March 19th, 2009, 03:41 PM	#4
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	I see you viewing this thread chad. >_>

March 19th, 2009, 04:27 PM	#6
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	I tried search function, I put cylinder head swap. Grrr

March 19th, 2009, 04:35 PM	#8
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	I put it because people were being beetches about me showing off my dads car

March 19th, 2009, 07:10 PM	#10
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	No someone else had that sig so I used it on here. I thought it fit. >.>

March 19th, 2009, 08:00 PM	#11
unlicensed to drive MM Fanatic Blank Join Date: Feb 2009 Posts: 4,733 iTrader: 1 reviews	Our car only has 10k miles FYI

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:38 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.