Midpipe

Jucostud · April 2nd, 2009, 02:15 AM

i ran pypes. would buy them again. I've still got there mid-muffler set up. IMO, they are the best sounding mufflers on the market. took a while to get the mids to not rub, but when thats the sound you want and they are the only company that makes that product, you have no choice.

tribaltek · April 2nd, 2009, 11:17 AM

Originally Posted by Jucostud

i ran pypes. would buy them again. I've still got there mid-muffler set up. IMO, they are the best sounding mufflers on the market.

I'm not going to knock your MM system, but this is a prime example of how exhaust sound is so subjective. I've had stock, the MM system with OR-H, then added LT's, then swapped to Bassani Race, and I think the Bassani Race axle-backs sound light years better than the MM system. The MM was slightly louder, but it was just so, I don't know the word... "un-crisp"? Super muffled and not a clean tone at all. The Bassani's are amazing from low end to high, with zero drone.

It's really best to listen to a LOT of systems in person before committing to anything.

AnimalCrackers · April 2nd, 2009, 11:30 AM

btw tribal, does the OBX setup plus stingers give a similar sound to the pypes o/r h? how was fitment on the LTs? any kind of issues since?

tribaltek · April 2nd, 2009, 03:00 PM

I don't have Singers, nor have I heard them in person with OBX LT's, so I can't really say.

OBX Headers are top notch quality, perfect fitment, and zero issues. I think I paid around $450 shipped for mine.

Mickey · April 2nd, 2009, 03:10 PM

I have an o/r h ill sell you for 100

mrsinister2424 · April 2nd, 2009, 03:22 PM

Eh, pypes is ok. Fitment is not perfect, but they sound nice. At least their welds are good! I didn't know they made a 4 piece design for a midpipe though.... They only make 3 piece for new edges, and those were a pain in the ass as it was. 4 piece!?

I do see mostly o/r h on s197's though

Mickey · April 2nd, 2009, 03:55 PM

my pypes fit flawlessly...two piece h-pipe

07stanggt · April 2nd, 2009, 06:31 PM

Originally Posted by tajoerg

Member of a local car club gettin married, and selling his 07 to pay some bills was parting out his mods. Kooks OR/H with about 10k miles on it for 200

As already said those kooks mid pipes are for the kooks long tubes. They arenot going to mount to your stock manifold.

Check out a o/r prochamber.

07stanggt · April 2nd, 2009, 06:35 PM

and having read through the rest of the thread, im not sure what you are trying to do, but your buying a used kooks mid pipe and in the summer going to shop for headers?

Again the kooks mid pipe is for kooks long tubes, it wont mount to the stock manifold, and it would need some modification to mount to any other long tubes.

If you are going long tubes in the summer just wait on the midpipe. Or get the o/r prochamber, then when you bought mac long tubes, you would just need the short legs, or cut the the long legs.

Mickey · April 2nd, 2009, 07:19 PM

o/r prochamber ftmfw

tajoerg · April 4th, 2009, 06:21 PM

yea im gunna shop for headers when i can afford them

April 2nd, 2009, 02:15 AM	#21
Jucostud booooost'd 2007 Mustang Join Date: Nov 2006 Location: drink'n ur kool-aid Posts: 6,985 iTrader: 0 reviews	i ran pypes. would buy them again. I've still got there mid-muffler set up. IMO, they are the best sounding mufflers on the market. took a while to get the mids to not rub, but when thats the sound you want and they are the only company that makes that product, you have no choice. __________________ Jucostud's Official Build Thread I'm selling everything off my car, if i have something u want, pm me. 1988 lx 5.0 - Daily 2007 vortech gt - for sale 2012 mustang 5.0 - December 2011

April 2nd, 2009, 11:30 AM	#23
AnimalCrackers Hardcore Enthusiast 2007 Mustang GT 12.6@110 Join Date: Jul 2007 Location: Kansas City Posts: 2,213 iTrader: 0 reviews	btw tribal, does the OBX setup plus stingers give a similar sound to the pypes o/r h? how was fitment on the LTs? any kind of issues since? __________________ Professor Crackers

April 2nd, 2009, 03:00 PM	#24
tribaltek Hardcore Enthusiast 2002 Supercharged HD F150 Join Date: Feb 2008 Location: Detroit Posts: 2,490 iTrader: 1 reviews	I don't have Singers, nor have I heard them in person with OBX LT's, so I can't really say. OBX Headers are top notch quality, perfect fitment, and zero issues. I think I paid around $450 shipped for mine. __________________ '02 Supercharged Harley-Davidson F-150 '05 Mustang GT (Sold)

April 2nd, 2009, 03:10 PM	#25
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,398 iTrader: 0 reviews	I have an o/r h ill sell you for 100 __________________ Under Construction

April 2nd, 2009, 03:22 PM	#26
mrsinister2424 Hardcore Enthusiast 99' Mustang GT 3214@OVER 9000!!! Join Date: Dec 2008 Location: Redlands, CA Posts: 2,626 iTrader: 0 reviews	Eh, pypes is ok. Fitment is not perfect, but they sound nice. At least their welds are good! I didn't know they made a 4 piece design for a midpipe though.... They only make 3 piece for new edges, and those were a pain in the ass as it was. 4 piece!? I do see mostly o/r h on s197's though __________________ 99' Rio Red Mustang GT: --My Garage-- Check garage. Vortech V-1 intercooled running 9lbs of boost Life= eat, lift, eat, eat, eat, sleep, repeat

April 2nd, 2009, 03:55 PM	#27
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,398 iTrader: 0 reviews	my pypes fit flawlessly...two piece h-pipe __________________ Under Construction

April 2nd, 2009, 06:35 PM	#29
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	and having read through the rest of the thread, im not sure what you are trying to do, but your buying a used kooks mid pipe and in the summer going to shop for headers? Again the kooks mid pipe is for kooks long tubes, it wont mount to the stock manifold, and it would need some modification to mount to any other long tubes. If you are going long tubes in the summer just wait on the midpipe. Or get the o/r prochamber, then when you bought mac long tubes, you would just need the short legs, or cut the the long legs.

April 2nd, 2009, 07:19 PM	#30
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,398 iTrader: 0 reviews	o/r prochamber ftmfw __________________ Under Construction

April 4th, 2009, 06:21 PM	#31
tajoerg Regular 2006 Mustang GT Join Date: Dec 2008 Location: Buffalo, NY Posts: 89 iTrader: 0 reviews	yea im gunna shop for headers when i can afford them __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Midpipe
Thread	Thread Starter	Forum	Replies	Last Post
97 GT midpipe	Mustang RacR94	96-98	4	April 1st, 2008 10:48 PM
Midpipe	ZoomZoomMFer	96-98	16	January 25th, 2008 05:13 PM
New Midpipe	cobramac	99-04	5	December 13th, 2007 12:24 PM
midpipe	stang89	99-04	15	October 5th, 2007 09:34 AM
Midpipe help now!!!	RandoGT	General Tech	3	September 12th, 2007 12:20 AM

All times are GMT -4. The time now is 05:21 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.