im an idiot.

07 STROKER · April 4th, 2009, 08:47 PM

So i went to roll over my engine with a wrench on the crank bolt and it started to bind...couldint figure out why...cams are in chains are on but the follerers are out stil...backed it off and tried again...it bound and went " click, click click." FUCK! i couldint figure out why so i tore it all down to the block and reassembled.

Rolled it over fine...spun it upside down to put the pan on and brought it back around...same thing...clicking.

Then i figured it out...when it was upside down 3 of the lifters slid out and rested agaist he cam...when i rolled it over they bound against the cam...im a idiot..now i have litle nickes in the side of the lifter....should I replace them or run them?

06VistaBlueGT · April 4th, 2009, 08:48 PM

Replace them.

07 STROKER · April 4th, 2009, 08:49 PM

they still function fine and arent bent just mared a bit on the edge

navyman8903 · April 4th, 2009, 09:05 PM

so they are not fucked?

If not slap her together and see what happens.

chad05gt · April 4th, 2009, 09:13 PM

[QUOTE=navyman8903;1971224]so they are not fucked?

If not slap her together and see what happens.[/QUOTE]

I wouldnt... after all that work, its worth it to KNOW that it is RIGHT.

Dont half-ass what you are going to be dropping the clutch at 5K+ and spinning 7K at over 100mph...
EVER!

navyman8903 · April 4th, 2009, 10:17 PM

I agree with you.

But they are rollers and not the valves them selves. I have seen stock parts come out in worse condition. But the safe smart thing to do it replace them.

05bluestang · April 4th, 2009, 10:37 PM

fixed

Originally Posted by navyman8903

so you did not get fucked?
slap her and see what happens.

navyman8903 · April 4th, 2009, 10:39 PM

HAHAHAHAHAH

navyman8903 · April 4th, 2009, 10:40 PM

I just rep'd all over your face.

05bluestang · April 4th, 2009, 10:49 PM

Originally Posted by navyman8903

I just rep'd all over your face.

Mmmmmmmmmmm, tasty. Thank you kindly

NastyFX4 · April 5th, 2009, 12:27 AM

Originally Posted by 05bluestang

Mmmmmmmmmmm, tasty. Thank you kindly

Easy there Killer, there are 14 year olds on this forum !!

navyman8903 · April 5th, 2009, 12:47 AM

not in this thread.....

NastyFX4 · April 5th, 2009, 01:11 AM

Originally Posted by navyman8903

not in this thread.....

It's only a matter of time.

navyman8903 · April 5th, 2009, 02:11 AM

I know he is lurking somewhere....

Jakashh · April 5th, 2009, 02:15 AM

Originally Posted by NastyStang113

Easy there Killer, there are 14 year olds on this forum !!

name 3.

NastyFX4 · April 5th, 2009, 02:46 AM

Originally Posted by Jakashh

name 3.

Name 1, he posts enough for three average users.

Mickey · April 5th, 2009, 03:00 AM

Originally Posted by NastyStang113

It's only a matter of time.

Jakashh · April 5th, 2009, 03:16 AM

Originally Posted by NastyStang113

Name 1, he posts enough for three average users.

is his name jakashh?

I'm 17 and 2/3rds!

navyman8903 · April 5th, 2009, 03:19 AM

but you have a DL.....

Jakashh · April 5th, 2009, 03:23 AM

Originally Posted by navyman8903

but you have a DL.....

if you are talking to me, then yes, b/c i got it when you had to be 16 to get one

April 4th, 2009, 08:47 PM	#1
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,933 iTrader: 0 reviews	im an idiot. So i went to roll over my engine with a wrench on the crank bolt and it started to bind...couldint figure out why...cams are in chains are on but the follerers are out stil...backed it off and tried again...it bound and went " click, click click." FUCK! i couldint figure out why so i tore it all down to the block and reassembled. Rolled it over fine...spun it upside down to put the pan on and brought it back around...same thing...clicking. Then i figured it out...when it was upside down 3 of the lifters slid out and rested agaist he cam...when i rolled it over they bound against the cam...im a idiot..now i have litle nickes in the side of the lifter....should I replace them or run them? __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 4th, 2009, 08:49 PM	#3
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,933 iTrader: 0 reviews	they still function fine and arent bent just mared a bit on the edge __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

Threads Similar to: im an idiot.
Thread	Thread Starter	Forum	Replies	Last Post
Anyone know who this idiot is?	C MY 4D	The Clubhouse	17	September 16th, 2008 04:46 PM
ok, im not an idiot but...	shadow5403	The Clubhouse	8	June 26th, 2008 01:35 PM
im not the only idiot	DeMello	The Clubhouse	46	June 18th, 2008 06:40 PM
im and idiot	itschristorres8	The Clubhouse	11	May 14th, 2008 08:23 AM
An idiot talking about an idiot	Regency 2007	The Clubhouse	2	March 20th, 2008 10:52 AM

April 4th, 2009, 08:48 PM	#2
06VistaBlueGT Enthusiast 2006 Mustang GT 12.76@105 Join Date: Jan 2007 Location: Stark County, Ohio Posts: 869 iTrader: 0 reviews	Replace them.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 04:06 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.