Ford Racing Diff Cover

06GTMustang89 · May 2nd, 2009, 03:57 PM

I did a little searching on craigslist in my area...and i found this brand new FRPP diff cover for 100$ cash...hasn't been used and was still in the box sealed. I couldn't pass that up..and my stock cover was leaking from my moron friend jacking my axle up at the track who bent it....very easy install only took 20 min...just was a pain in the ass cuz all the bolts are alan head instead of hex...good thing i did this cuz when i drained the fluid it was VERY low...plus these covers make it very easy for draining and re filling because you have a drain hole and fill hole...well worth the money for anybody looking for more protection in your axle...

and this is a viper was beside on the road the other day...good guy i know him from the track...

navyman8903 · May 2nd, 2009, 04:13 PM

Nice, can't wait to get mine on there and the rear end together.

HMUSN · May 2nd, 2009, 04:14 PM

Looks great man.

06GTMustang89 · May 2nd, 2009, 04:15 PM

yeah man you can definitely tell its a stronger unit...when im doing the tranny swap in a couple months im going to be doing 4.56's with moser 31 splined axles so it will come off again...and ill be doing this little beauty....CHE axle brace its grey in the pic but mine will be black..it completely triangulates the rear axle and stiffens the shit out of it so no flex during hard launches and hard corners...

View the S/T 8.8 Axle Brace<br>Part # CHE9L at http://www.cheperformance.com

navyman8903 · May 2nd, 2009, 04:18 PM

Hey off topic what hurst is that for sale in july........

06GTMustang89 · May 2nd, 2009, 04:21 PM

the competition plus (non billet one) she is PERFECT i have had zero complaints with the shifter...before my tr3650 synchroes screwed up...i could powershift with ease with this shifter compared to stock...very short throw too...i'll sell it to you cheap...

navyman8903 · May 2nd, 2009, 04:24 PM

Oh I had one and loved it in my last car I was just too lazy to take it out after taking out the LT's. I'll take it pm en route.

War Machine 115 · May 2nd, 2009, 04:44 PM

I like that che brace. Also has a plate for jacking the car up so so you don't have to jack off the pumpkin.

...ew...jacking a pumpkin off...nasty

06GTMustang89 · May 2nd, 2009, 04:57 PM

Originally Posted by War Machine 115

I like that che brace. Also has a plate for jacking the car up so so you don't have to jack off the pumpkin.

...ew...jacking a pumpkin off...nasty

not only do you not have to jack off the pumpkin this brace also stiffens the pumpkin for easier jacking

302svt · May 2nd, 2009, 05:55 PM

Where is the cheapest place to purchase one of these?

NastyFX4 · May 2nd, 2009, 07:55 PM

Don't you need a panhard bar relocation bracket to fit these with an aftermarket panhard bar?

06GTMustang89 · May 2nd, 2009, 08:11 PM

nope the FRPP one is made for clearance on the 05+

UrbanRedneck · May 2nd, 2009, 09:02 PM

I didn't know that. Does it have plenty of clearance with your bar? I've been thinking about getting one of those.

06GTMustang89 · May 2nd, 2009, 09:04 PM

plenty of clearance would you like a pic of said clearance?

2006greyGT · May 2nd, 2009, 09:17 PM

yes

UrbanRedneck · May 2nd, 2009, 09:27 PM

indeed I would kind sir.

06GTMustang89 · May 2nd, 2009, 09:51 PM

Told Ya'll

UrbanRedneck · May 2nd, 2009, 10:11 PM

cool beans. Is that with the suspension loaded?

/adds to list

06GTMustang89 · May 2nd, 2009, 10:12 PM

yeah the car is on the ground...summitracing.com has the best price for it i beleive...199$

NastyFX4 · May 3rd, 2009, 12:18 AM

Add that to my mod list. LOL

May 2nd, 2009, 03:57 PM	#1
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	Ford Racing Diff Cover I did a little searching on craigslist in my area...and i found this brand new FRPP diff cover for 100$ cash...hasn't been used and was still in the box sealed. I couldn't pass that up..and my stock cover was leaking from my moron friend jacking my axle up at the track who bent it....very easy install only took 20 min...just was a pain in the ass cuz all the bolts are alan head instead of hex...good thing i did this cuz when i drained the fluid it was VERY low...plus these covers make it very easy for draining and re filling because you have a drain hole and fill hole...well worth the money for anybody looking for more protection in your axle... and this is a viper was beside on the road the other day...good guy i know him from the track... __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more. Last edited by 06GTMustang89; May 2nd, 2009 at 04:02 PM.

May 2nd, 2009, 04:14 PM	#3
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	Looks great man. __________________

May 2nd, 2009, 04:15 PM	#4
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	yeah man you can definitely tell its a stronger unit...when im doing the tranny swap in a couple months im going to be doing 4.56's with moser 31 splined axles so it will come off again...and ill be doing this little beauty....CHE axle brace its grey in the pic but mine will be black..it completely triangulates the rear axle and stiffens the shit out of it so no flex during hard launches and hard corners... View the S/T 8.8 Axle Brace<br>Part # CHE9L at http://www.cheperformance.com __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more. Last edited by 06GTMustang89; May 2nd, 2009 at 04:18 PM.

May 2nd, 2009, 04:21 PM	#6
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	the competition plus (non billet one) she is PERFECT i have had zero complaints with the shifter...before my tr3650 synchroes screwed up...i could powershift with ease with this shifter compared to stock...very short throw too...i'll sell it to you cheap... __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

May 2nd, 2009, 04:44 PM	#8
War Machine 115 Regular 2008 Mustang GT Join Date: Nov 2007 Location: Delaware Posts: 252 iTrader: 0 reviews	I like that che brace. Also has a plate for jacking the car up so so you don't have to jack off the pumpkin. ...ew...jacking a pumpkin off...nasty __________________ www.fquick.com/warmachine115

May 2nd, 2009, 05:55 PM	#10
302svt Regular Join Date: Nov 2007 Location: Eastern, KY Posts: 163 iTrader: 0 reviews	Where is the cheapest place to purchase one of these?

May 2nd, 2009, 07:55 PM	#11
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 15,028 iTrader: 8 reviews	Don't you need a panhard bar relocation bracket to fit these with an aftermarket panhard bar? __________________ NastyStang's Garage Sale!!

May 2nd, 2009, 08:11 PM	#12
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	nope the FRPP one is made for clearance on the 05+ __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

May 2nd, 2009, 09:02 PM	#13
UrbanRedneck Hardcore Enthusiast 2008 Mustang GT 13.124@105.52 Join Date: May 2008 Location: Chicago Posts: 2,138 iTrader: 1 reviews	I didn't know that. Does it have plenty of clearance with your bar? I've been thinking about getting one of those. __________________ Hurst Crew Member #20 2008 GT - ARH, C&L, Hurst, BORLA, BMR, Bilstein, FRPP, Axle Exchange. Awesome.

May 2nd, 2009, 09:04 PM	#14
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	plenty of clearance would you like a pic of said clearance? __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

May 2nd, 2009, 09:17 PM	#15
2006greyGT Premium Member 2006 Satin Silver GT 11.08@125.22 Join Date: Aug 2007 Location: KC Posts: 2,950 iTrader: 0 reviews	yes __________________ 2.6l KENNE BELL 298 Stroker, Ported heads Pro Motion Built 3650/McLeod RST/ MGW Short Throw Long tube/O/R X /Borla Touring 8 rib/65 lb injectors/GT500 twin fuel ET Drag Slicks/3.73 gear Detroit Truetrac /CDC AGR Spoiler

May 2nd, 2009, 09:27 PM	#16
UrbanRedneck Hardcore Enthusiast 2008 Mustang GT 13.124@105.52 Join Date: May 2008 Location: Chicago Posts: 2,138 iTrader: 1 reviews	indeed I would kind sir. __________________ Hurst Crew Member #20 2008 GT - ARH, C&L, Hurst, BORLA, BMR, Bilstein, FRPP, Axle Exchange. Awesome.

May 2nd, 2009, 09:51 PM	#17
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	Told Ya'll __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

May 2nd, 2009, 10:11 PM	#18
UrbanRedneck Hardcore Enthusiast 2008 Mustang GT 13.124@105.52 Join Date: May 2008 Location: Chicago Posts: 2,138 iTrader: 1 reviews	cool beans. Is that with the suspension loaded? /adds to list __________________ Hurst Crew Member #20 2008 GT - ARH, C&L, Hurst, BORLA, BMR, Bilstein, FRPP, Axle Exchange. Awesome.

May 2nd, 2009, 10:12 PM	#19
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	yeah the car is on the ground...summitracing.com has the best price for it i beleive...199$ __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

May 3rd, 2009, 12:18 AM	#20
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 15,028 iTrader: 8 reviews	Add that to my mod list. LOL __________________ NastyStang's Garage Sale!!

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Ford Racing Diff Cover
Thread	Thread Starter	Forum	Replies	Last Post
Rear Diff Cover	Muscletang	96-98	13	December 15th, 2008 11:47 PM
LPW diff cover plug size?	BudgetPlan1	2005 - 2010	0	August 14th, 2008 11:21 AM
ford racing valve cover question	whitefox89	5.0 Mustangs	11	May 10th, 2008 03:34 PM
Roush Diff Cover Girdle Issue	gsjohnson	99-04	14	November 9th, 2007 10:54 PM

All times are GMT -4. The time now is 01:41 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.