Going to test and tune at MIR to test out the mods.

navyman8903 · July 1st, 2009, 10:11 AM

So I am going to MIR this SUNDAY at 1000am for shake down runs and see what I can cut with all my mods. Hoping for at the very least a 12.8. Do you guys think I can get it?

Full bassani exhaust (LT's,x-pipe, race ab's)
airaid/brenspeed tune
3.73's
spydershaft
meziere
BULLITT POWER!

navyman8903 · July 1st, 2009, 10:34 AM

Oh and who is comming with me???? That is the main question.

tbi0904 · July 1st, 2009, 11:10 AM

I was planning on going...gonna play with tire pressure and shift points (might try to powershift) and see how deep into the 11's I can get

tbi0904 · July 1st, 2009, 11:11 AM

Oh yeah, what tires do you have? If you can hook you should hit 12.8's no problem.

navyman8903 · July 1st, 2009, 11:20 AM

oh I have the stockers. But I am looking at running about 20 psi maybe less with a mild burnout. Can't wait to see that whipple run!

chad05gt · July 1st, 2009, 11:23 AM

Originally Posted by navyman8903

oh I have the stockers. But I am looking at running about 20 psi maybe less with a mild burnout. Can't wait to see that whipple run!

not even dr's?? doubt you'll get into 12's at all... even if baby out hole, slamming 2nd and 3rd gonna spin... and w/ 3.73's.. no chance to recover.

im guessing 13.3's at 109

navyman8903 · July 1st, 2009, 11:25 AM

Idk I think I can get her out of there with a 1.9 or 1.8 60ft. So it is all the engine after that. I will be shifting about 6300 every time. So Hopefully I can break 13's. If I had dr's I would be cutting some nice times.

08 Vegas GT · July 1st, 2009, 12:11 PM

It's gonna be close. D/R's would def. help. Best of luck to you, let us know how it goes. I need to wait until it cools down here to even go to the track, its soo hot here in vegas, its not really worth going. Its been hitting 110-113 during the day and doesnt cool off much at night when they run. Plus, our elevation makes our times a little higher. I wish I could run in cool temps at sea level, that would be nice!

tbi0904 · July 1st, 2009, 12:42 PM

Originally Posted by navyman8903

Idk I think I can get her out of there with a 1.9 or 1.8 60ft. So it is all the engine after that. I will be shifting about 6300 every time. So Hopefully I can break 13's. If I had dr's I would be cutting some nice times.

The best 60ft times I ever got with my street tires was 2.17, leaving off idle. Chad is 100% correct. The 1-2 shift was an adventure, powershifting sent me on a beeline towards the wall (not fun btw), I had to baby the hell out of the shift...that was pre-Whipple as well. I will say I'm not the best driver in the world and I do have some physical issues with my leg. So there's some hope! Worst comes to worst if you bring a jack with you I'll bring some jackstands and you can use my dr's for a couple runs if you want.

Mickey · July 1st, 2009, 01:50 PM

13.2 @ 107

navyman8903 · July 1st, 2009, 01:52 PM

I cut a low 1.9 60ft in my last GT with 3.55's. I should be able to cut a 1.9 or a 1.8. I can drive. I'm not going to say I am amazing, but it comes easy to me. I hope I get a 12 something. That is all I am shooting for on the street tires.

chad05gt · July 1st, 2009, 01:53 PM

yes, but you are making more power, steeper gears... the street tires hurt more now than before... trust US... get some dr's before the weekend and have a good time; you'll wish you did

what did you run before mods? Ill bet you run same, but w/ higher mph.

navyman8903 · July 1st, 2009, 02:01 PM

shit you are right.........oh well I am still going. I would get radials but I am going on leave sunday night so can't afford them. Need money for booze and bitches(by bitches I mean ladies)............

chad05gt · July 1st, 2009, 02:10 PM

Originally Posted by navyman8903

shit you are right.........oh well I am still going. I would get radials but I am going on leave sunday night so can't afford them. Need money for booze and bitches(by bitches I mean ladies)............

Sounds like money well spent

Usually theres someone at the track that'll let you make a run on their dr's for a couple bucks

; ask around...

navyman8903 · July 1st, 2009, 02:12 PM

I might ask around......

navyman8903 · July 1st, 2009, 02:23 PM

I dont suppose I can trade sexual favors from my camera man for some DR's........

Rico-mofos · July 1st, 2009, 02:26 PM

Good Luck bro!

tbi0904 · July 1st, 2009, 03:02 PM

Originally Posted by navyman8903

I might ask around......

See my last post...I will require the common courtesy of a reach around though.

NastyFX4 · July 1st, 2009, 03:04 PM

I hope you have good air on Sunday.

navyman8903 · July 1st, 2009, 03:18 PM

Originally Posted by tbi0904

See my last post...I will require the common courtesy of a reach around though.

OH shit I read way to fast I could do that if you are down. I just need a torque wrench........... I have a jack and 2 stands. You are the man.

July 1st, 2009, 11:10 AM	#3
tbi0904 Regular 2008 Mustang GT 11.65@122 Join Date: Apr 2008 Location: Huntley, Il. Posts: 418 iTrader: 0 reviews	I was planning on going...gonna play with tire pressure and shift points (might try to powershift) and see how deep into the 11's I can get __________________ Whipple and stuff

July 1st, 2009, 11:11 AM	#4
tbi0904 Regular 2008 Mustang GT 11.65@122 Join Date: Apr 2008 Location: Huntley, Il. Posts: 418 iTrader: 0 reviews	Oh yeah, what tires do you have? If you can hook you should hit 12.8's no problem. __________________ Whipple and stuff

July 1st, 2009, 12:11 PM	#8
08 Vegas GT Regular 2011 Mustang GT 5.0 13.0/before mods Join Date: Jul 2008 Location: Las Vegas, NV Posts: 147 iTrader: 0 reviews	It's gonna be close. D/R's would def. help. Best of luck to you, let us know how it goes. I need to wait until it cools down here to even go to the track, its soo hot here in vegas, its not really worth going. Its been hitting 110-113 during the day and doesnt cool off much at night when they run. Plus, our elevation makes our times a little higher. I wish I could run in cool temps at sea level, that would be nice! __________________ 2011 5.0, 3:73's, Steeda CAI, SCT X3 w/Brenspeed, Flowmaster, Eibach, Shelby CS40's, Nitto, CS Fascia, Roush Grille 08 GT, Shelby Razors, Eibach, JLT CAI, SCT X3, Flowmaster-SOLD 03 GT 18" Saleens, BBK CAI, Eibach, Flowmaster-SOLD

July 1st, 2009, 01:50 PM	#10
Mickey I Post Entirely Way Too Much Join Date: Nov 2007 Posts: 6,391 iTrader: 0 reviews	13.2 @ 107 __________________ Under Construction

July 1st, 2009, 02:26 PM	#17
Rico-mofos Hardcore Enthusiast 2008 Bullitt #890 slow Join Date: Jan 2008 Location: Chicago Posts: 1,589 iTrader: 0 reviews	Good Luck bro! __________________ BULLITT CREW #5 LT GTB mufflers for sale

July 1st, 2009, 03:04 PM	#19
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 16,010 iTrader: 9 reviews	I hope you have good air on Sunday. __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/2005-2010/128792-going-test-tune-mir-test-out-mods.html
Posted By	For	Type	Date
Going to test and tune at MIR to test out the mods.	This thread	Pingback	August 6th, 2009 09:36 AM

Threads Similar to: Going to test and tune at MIR to test out the mods.
Thread	Thread Starter	Forum	Replies	Last Post
New Race Weekend Roll Out At Mir For Test And Tune (2005+)	navyman8903	Mid-Atlantic	14	March 22nd, 2009 12:30 AM
MODDED roll out to MIR for test and tune march 28th	navyman8903	Southeast	4	March 22nd, 2009 12:29 AM
MIR MM test and tune IMO is a no go.	navyman8903	The Clubhouse	6	March 13th, 2009 04:20 PM
test and tune MIR saturday march 14	navyman8903	Mid-Atlantic	9	February 18th, 2009 03:34 PM
test and tune!	LOWCOP	Northeast	1	October 17th, 2008 12:35 AM

All times are GMT -4. The time now is 04:43 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.