boost gauge ?

brianm · October 31st, 2009, 11:22 PM

hey guys, I was wondering who knows the best way to route the boost line from the motor to the cabin

.

usnzt84 · November 1st, 2009, 11:11 AM

i just used a wire grommet

brianm · November 1st, 2009, 02:13 PM

thanks, but I ment the best way to route it from the motor to the cabin.

07 STROKER · November 1st, 2009, 02:19 PM

Brian,

Under the drivers foot pedal area there is a large rubber gromet where the wires come through the cabin

Jack up the front of the car, remove the drivers sidr tire, then remove the plastic inner fender...its held in with 4 push pin connectors...you will need needle nose pliers or a flat screwdriver. once the plastic fender is removed you will have access to the other side of the rubber gromet. cut a hole and pull it through....super easy to do.

brianm · November 1st, 2009, 04:44 PM

cool thanks/reps

NastyFX4 · November 1st, 2009, 05:03 PM

07 Stroker said it, that's the best way by far.

05bluestang · November 1st, 2009, 05:14 PM

Originally Posted by NastyStang113

07 Stroker said it, that's the best way by far.

+10000000000

October 31st, 2009, 11:22 PM	#1
brianm Hardcore Enthusiast 2011 ram 1500 hemi Join Date: Sep 2007 Location: sylvan lake, alberta Posts: 1,333 iTrader: 0 reviews	boost gauge ? hey guys, I was wondering who knows the best way to route the boost line from the motor to the cabin. __________________ vmp500 hp. jba lts. powerhouse d/s Sold

November 1st, 2009, 11:11 AM	#2
usnzt84 Regular 2008 Mustang GT Join Date: Apr 2008 Location: Charleston, South Carolina Posts: 224 iTrader: 0 reviews	i just used a wire grommet __________________ Vortech Supercharger,Hurst shifter, Diablo Sport Predator tune, Pypes O/R x-pipe, Super 44 Flowmasters,Hawk HPS Brake pads, Granitelli Slotted and Dimpled Rotors, Goodrich Steel braided brake lines, FRPP 3.73

November 1st, 2009, 02:13 PM	#3
brianm Hardcore Enthusiast 2011 ram 1500 hemi Join Date: Sep 2007 Location: sylvan lake, alberta Posts: 1,333 iTrader: 0 reviews	thanks, but I ment the best way to route it from the motor to the cabin. __________________ vmp500 hp. jba lts. powerhouse d/s Sold

November 1st, 2009, 02:19 PM	#4
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,933 iTrader: 0 reviews	Brian, Under the drivers foot pedal area there is a large rubber gromet where the wires come through the cabin Jack up the front of the car, remove the drivers sidr tire, then remove the plastic inner fender...its held in with 4 push pin connectors...you will need needle nose pliers or a flat screwdriver. once the plastic fender is removed you will have access to the other side of the rubber gromet. cut a hole and pull it through....super easy to do. __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 1st, 2009, 04:44 PM	#5
brianm Hardcore Enthusiast 2011 ram 1500 hemi Join Date: Sep 2007 Location: sylvan lake, alberta Posts: 1,333 iTrader: 0 reviews	cool thanks/reps __________________ vmp500 hp. jba lts. powerhouse d/s Sold

November 1st, 2009, 05:03 PM	#6
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 15,028 iTrader: 8 reviews	07 Stroker said it, that's the best way by far. __________________ NastyStang's Garage Sale!!

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: boost gauge ?
Thread	Thread Starter	Forum	Replies	Last Post
Wideband, A/F guage, and boost guage on!!!!	BakerFX4	99-04	4	June 6th, 2008 01:54 AM
Good Boost guage????	BakerFX4	99-04	2	May 11th, 2008 11:08 AM
Which boost guage to get?????	BakerFX4	99-04	8	May 10th, 2008 09:41 PM
another ? boost guage and stuff	BakerFX4	99-04	51	April 2nd, 2008 08:46 PM
Introducing a Supercharger to a Boost Guage	OcOnnor220	99-04	0	September 24th, 2007 09:44 PM

All times are GMT -4. The time now is 01:49 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.