Under hood insulation...

navyman8903 · November 4th, 2009, 08:00 PM

^ it does make sense.

And I will be going to richmond on saturday for their test and tune. I might run....Idk just yet. I can't hook I keep running 13.8's at 105-106 with a 2.2-2.4 60ft and I am not going to pay $30 to suck. But Maybe I will hook or something. I think that I am overpowering the tires if that makes any sense. And I don't have a really badass setup either..

DiMora · November 4th, 2009, 08:31 PM

Originally Posted by NastyStang113

I wonder why you removed yours, Shane.

It was polishing the matte-powdercoat on my Steeda strut tower brace (which no longer fits my TVS)...and my clearance is going to be super-tight once I install my custom billet strut tower brace over top my TVS unit.

Plus, I didn't want it to chafe my carbon fiber TVS air intake's finish.

walruspuncher · November 4th, 2009, 09:00 PM

Navy, I took mine off just to check to see if it would let a STB fit better. It looked fine on mine, no yellow or shit.

navyman8903 · November 4th, 2009, 09:10 PM

^ sweet thanks for the heads up, reps.. Hey what power adder are you running again?

Anthony05GT · November 4th, 2009, 09:44 PM

Originally Posted by DiMora

It was polishing the matte-powdercoat on my Steeda strut tower brace (which no longer fits my TVS)...and my clearance is going to be super-tight once I install my custom billet strut tower brace over top my TVS unit. Plus, I didn't want it to chafe my carbon fiber TVS air intake's finish.

Come on, you'd rather chafe your TVS air intake than your ass right?

On a serious note, I'd like to know which strut tower brace would work with my Whipple and RK Sport ducted hood.

DiMora · November 4th, 2009, 10:46 PM

Originally Posted by Anthony05GT

Come on, you'd rather chafe your TVS air intake than your ass right?

On a serious note, I'd like to know which strut tower brace would work with my Whipple and RK Sport ducted hood.

Couldn't tell you...my search for a pre-made one has failed. Mine will be a custom billet one-off that a friend of mine is making. It will be moto-porn.

walruspuncher · November 5th, 2009, 12:31 AM

Originally Posted by navyman8903

^ sweet thanks for the heads up, reps.. Hey what power adder are you running again?

2.6 L KB blower at 8 psi

06Stang · November 5th, 2009, 12:53 AM

Took mine off today. Rivets>Me

PIA

NastyFX4 · November 5th, 2009, 01:05 AM

Originally Posted by DiMora

It was polishing the matte-powdercoat on my Steeda strut tower brace (which no longer fits my TVS)...and my clearance is going to be super-tight once I install my custom billet strut tower brace over top my TVS unit. Plus, I didn't want it to chafe my carbon fiber TVS air intake's finish.

It's damn sure that it would rub it, too.

navyman8903 · November 5th, 2009, 06:31 AM

Originally Posted by 06Stang

Took mine off today. Rivets>Me

PIA

yeah my last car and I had a fight with that part. There were probably at least half of them still in the hood.

DiMora · November 5th, 2009, 10:03 AM

Originally Posted by 06Stang

Took mine off today. Rivets>Me

PIA

Originally Posted by navyman8903

yeah my last car and I had a fight with that part. There were probably at least half of them still in the hood.

Dudes, a panel popper tool makes removal very easy. Sears, has individual tools or Harbor freight has a whole kit for $14.00. Mine is the Sears "Lisle" brand and it was less than ten bucks for the one tool.

- Harbor Freight Tools - Quality Tools at the Lowest Prices

Sears:

http://www.sears.com/shc/s/p_10153_1...word=body+trim

http://www.sears.com/shc/s/p_10153_1...6310000P?mv=rr

DiMora · November 5th, 2009, 10:04 AM

Originally Posted by NastyStang113

It's damn sure that it would rub it, too.

Naw, my new setup will be precision machined, and the hood blanket is no factor as it has gone adios.

I am modifying the two ribs under the hood adjacent to the center part and using my stock hood.

navyman8903 · November 5th, 2009, 11:09 AM

Originally Posted by DiMora

Dudes, a panel popper tool makes removal very easy. Sears, has individual tools or Harbor freight has a whole kit for $14.00. Mine is the Sears "Lisle" brand and it was less than ten bucks for the one tool.

- Harbor Freight Tools - Quality Tools at the Lowest Prices

Sears:

http://www.sears.com/shc/s/p_10153_1...word=body+trim

http://www.sears.com/shc/s/p_10153_1...6310000P?mv=rr

Reps for saving my life..

NastyFX4 · November 5th, 2009, 03:06 PM

Originally Posted by DiMora

Naw, my new setup will be precision machined, and the hood blanket is no factor as it has gone adios.

I am modifying the two ribs under the hood adjacent to the center part and using my stock hood.

I meant the air intake tube and liner.

DiMora · November 5th, 2009, 04:39 PM

Originally Posted by NastyStang113

I meant the air intake tube and liner.

Aaaahhh...

navyman8903 · November 5th, 2009, 04:55 PM

I love it when a plan comes together.

dragrace4fun · November 7th, 2009, 12:18 AM

Okay, so taking mine out. If the damned motor catches fire, it had better suck that back down or I'll let it burn. I can always upgrade to a used GT500! Heh. Of course, this regarding the hood insulation material. Sorry, I don't get online all the time anymore.

tbirddmnd · December 8th, 2009, 11:46 PM

Sorry to bump up an older thread. If you're still having under hood issues I'm always out here making liners from aircraft firewall material, with heat resistant decals, if you guys want to replace your stock insulator. The most info and pics are on my blogspot page, the link is below.

dragrace4fun · December 9th, 2009, 12:16 AM

I don't see the link...

tbirddmnd · December 9th, 2009, 12:23 AM

Sorry, it's in my signature:

Aircraft material hood liner for Mustangs, Corvettes, Grand Nationals, & many other cars

November 4th, 2009, 09:00 PM	#43
walruspuncher Regular 2010 Mustang GT Join Date: Jul 2009 Location: Philadelphia, PA Posts: 279 iTrader: 0 reviews	Navy, I took mine off just to check to see if it would let a STB fit better. It looked fine on mine, no yellow or shit. __________________ Stage II KB Griggs GR40 Front and Rear Suspension (Full Mod List in Garage)

November 5th, 2009, 12:53 AM	#48
06Stang Regular 06 Mustang GT Join Date: Nov 2006 Location: Albuquerque, NM Posts: 277 iTrader: 0 reviews	Took mine off today. Rivets>Me PIA __________________ Saleen Supercharger/Bassani Exhaust/Pro5.0/TeamJDM Supercharger Upgrade/440RWHP a million miles above sea level FOR SALE: Saleen Wheels/Tires and Black Bullitt Wheels. PM

November 7th, 2009, 12:18 AM	#57
dragrace4fun Regular 2006 Mustang GT Join Date: Sep 2009 Location: Somewhere Nice, Florida Posts: 339 iTrader: 0 reviews	Okay, so taking mine out. If the damned motor catches fire, it had better suck that back down or I'll let it burn. I can always upgrade to a used GT500! Heh. Of course, this regarding the hood insulation material. Sorry, I don't get online all the time anymore. __________________ 2006 Mustang GT, Satin Silver Metallic, Dark Charcoal Interior Lotsa mods...lotsa fun! Aspiring to be clean, old-school muscular beauty and N/A powerful! Others: '67 Coupe '84 Cutlass Supreme Brougham

December 8th, 2009, 11:46 PM	#58
tbirddmnd Newbie 97 Tbird/97 Mark VIII LSC Join Date: May 2008 Location: Westland, Michigan Posts: 44 iTrader: 0 reviews	Sorry to bump up an older thread. If you're still having under hood issues I'm always out here making liners from aircraft firewall material, with heat resistant decals, if you guys want to replace your stock insulator. The most info and pics are on my blogspot page, the link is below. __________________ Gonzalo Duque "Gonzo" tbirddmnd@att.net Westland, Michigan www.hoodliners.net - My hoodliners I make

December 9th, 2009, 12:16 AM	#59
dragrace4fun Regular 2006 Mustang GT Join Date: Sep 2009 Location: Somewhere Nice, Florida Posts: 339 iTrader: 0 reviews	I don't see the link... __________________ 2006 Mustang GT, Satin Silver Metallic, Dark Charcoal Interior Lotsa mods...lotsa fun! Aspiring to be clean, old-school muscular beauty and N/A powerful! Others: '67 Coupe '84 Cutlass Supreme Brougham

December 9th, 2009, 12:23 AM	#60
tbirddmnd Newbie 97 Tbird/97 Mark VIII LSC Join Date: May 2008 Location: Westland, Michigan Posts: 44 iTrader: 0 reviews	Sorry, it's in my signature: Aircraft material hood liner for Mustangs, Corvettes, Grand Nationals, & many other cars __________________ Gonzalo Duque "Gonzo" tbirddmnd@att.net Westland, Michigan www.hoodliners.net - My hoodliners I make

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Under hood insulation...
Thread	Thread Starter	Forum	Replies	Last Post
Termi Hood Insulation.	Cricket	4V / SVT	20	May 29th, 2009 02:55 PM
How can I make a custom hood pad / insulation	jrfan4life	99-04	6	September 11th, 2008 02:03 PM
Hood insulation	jrfan4life	99-04	1	June 27th, 2007 07:20 PM
Hood Insulation	Garhfer	99-04	14	April 27th, 2007 09:16 AM
Hood Insulation	brad03svt	Modular Mustangs	5	March 21st, 2007 09:21 PM

All times are GMT -4. The time now is 07:52 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.