[sechmura]

The following list details the parts necessary to perform the GT500 front fascia conversion. When reading this post, realize that your existing Mustang fascia may or may not have fog lights, and you must carefuly investigate any wiring harness issues you may encounter. For this post, it is assumed that you have the Mustang GT with fog lights located in the upper radiator grille.

NOTE 1: The only item needed from the GT500 wiring harness is the female connector for the new fog lights. The necessary female connector may or may not be avaialbe as a separate Ford part. If not, then you’ll need to purchase the GT500 wiring harness and cut off the needed adapter. DO NOT install the GT500 wiring harness, as it does not match all the vehicles connections.

NOTE 2: The front half of the driver and passenger inner wheel well guards are not identical for the GT500 and GT. It may be possible to alter the stock GT wheel well guards to fit the holes on the new GT500 bumper and lower valence. I chose to purchase the GT500 guards since they were approximately $30 combined. If you do not purchase the GT500 trim pieces, and do not alter the stock trim, your valence will be unsecured in this location.

**PM me if you have any questions, perhaps I can help.

Parts List
==================================

• 7R3Z-17D957-APTM ,1, Bumper assembly
  7R3Z-17K945-AA, 1, Grille, lower
  7R3Z-8200-A, 1, Grille, radiator
  7R3Z-8B455-A, 1, Bracket
  7R3Z-8B455-B, 1, Bracket
  7R3Z-17C861-A, 1, Reinforcement
  7R3Z-17C861-B, 1, Reinforcement
  7R3Z-17626-AB, 1, Lower valence (optional, it wont impact the appearance of the bumper without, fastener holes are under the vehicle)
  7R3Z-17C882-A, 1, Isolator
  7R3Z-15200-A, 2, Foglamp (see Note 1)
  7R3Z-14290-EA, 1, Wiring harness (see Note 1)
  7R3Z-8C291-AA, 1, Shield
  7R3Z-13008-A, 1, Headlamp
  7R3Z-13008-B, 1, Headlamp
  5R3Z-16103-AA, 1, Guard, front (see Note 2)
  5R3Z-16102-AA, 1, Guard, front (see Note 2)

Fastener List
===================================

• W706805-S902, 10, Screw (diagram says 6, but it’s 10, you can get away with less)
  W302597, 10, Bolt
  S713547-S439, Nut, spring (unsure if nut spring is for screw or bolt)
  W711274-S439, Nut, spring (unsure if nut spring is for screw or bolt)
  Rivets, 4, Diameter 3/16", Grip 1/4" (there's an official Ford part for the rivet, but I chose to purchase some at a hardware store)

[Kuro]

wow, thats pretty fuckin intents... kinda like camping. hahaha. im awesome

[stanglifemike]

Wow, what was the cost, assuming that you have one this.

[Kuro]

i didnt even know you could buy the gt500 front fascia