best brand for N20

Bhblondguy · September 5th, 2007, 12:24 AM

what's the most used highly recommended brand of NITROUS...I want it now!

Bhblondguy · September 5th, 2007, 12:25 AM

and is the plate system better than the nozzle in the intake in front of the throttle body

Bhblondguy · September 5th, 2007, 01:15 PM

anyone?

GTsetGO · September 5th, 2007, 01:18 PM

i went with the NX plate system after months of research. it hits hard and I love it.

Bhblondguy · September 5th, 2007, 01:24 PM

what was the cost of that kit and what do you have besides the bottle? ...remote opener,blow down valve,bottle heater etc.

did you intall this yourself or have someone do it for you and what size shot are you running

GTsetGO · September 5th, 2007, 01:35 PM

i am running a 100 shot on my car right now.

I bought the kit from Summit and I also got the Genx2 kit which includes bottle heater, purge and what not.

i also put the MSD digital rpm switch on it. i wanted it to be as safe as possible

Regency 2007 · September 5th, 2007, 02:45 PM

NX

rugbyguitargod · August 2nd, 2008, 06:16 PM

i just sprayed my 75 wet shot on my engine for the first time last night and it was pretty good. ran a 13.5@108 mph with just an intake and exhaust. by the trap speed, i can get another .2 lower if i got the launch better. running a NX kit with WOT switch and analog window switch

forensicsteve · August 2nd, 2008, 06:42 PM

Experimenting with a 200 wet NX system. Only trying a 50 shot at present. We knew something was not quite right since purge only worked with engine off. Gave it a (50) shot anyway. It did decrease 1/8 mile by one tenth and added 3 mph. Had to abort pass at the end due to sputtering (melted plug). Did improve 1/4 mile ET by 2/10 but mph was way off. It was a fuel safety cut-off switch issue. Working now but not been back to track for another go. Only try 50 shot again until satisfied that all is working well. Have thoughts about 75 at launch + another 75 down the road....in addition to the turbo @ 20 lbs.

Got a few pics but did not do install, so cannot comment.

Bhblondguy · August 2nd, 2008, 07:08 PM

this is an older thread but...that's quite a beast you've got there

steve.

forensicsteve · August 2nd, 2008, 07:32 PM

Was not paying attention to the post dates

It's the extreme heat and humidity right now, that caused us to try N20. Cool the iat and boost the oxygen level diminished by the humidity. Seems like it was working well, even with just a 50 shot. Never know what that 1/4 mile might have been...lol

rugbyguitargod · August 2nd, 2008, 07:50 PM

wow, i didn't realize how old it was either haha

killermach1 · August 3rd, 2008, 08:33 AM

Originally Posted by GTsetGO

i went with the NX plate system after months of research. it hits hard and I love it.

I'll state first off I dont have nitrous "yet" but the NX plate system is what I plan on if I do go with it. I reasearched a lot and the NX stuff is top notch I have seen noone who is un happy with theirs.

September 5th, 2007, 12:24 AM	#1
Bhblondguy Hardcore Enthusiast 2005 Mustang GT 12.00@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 1,234 iTrader: 0 reviews	best brand for N20 what's the most used highly recommended brand of NITROUS...I want it now!

September 5th, 2007, 01:18 PM	#4
GTsetGO Cigar Assassin 2004 Mustang GT 12.88 @ 112 Join Date: Aug 2005 Location: A Galaxy Far, Far Away Posts: 14,081 iTrader: 10 reviews	i went with the NX plate system after months of research. it hits hard and I love it. __________________ Cigar Samplers for Sale 2008 Acura TL-S - 2008 Honda Pilot EX-SE

September 5th, 2007, 01:35 PM	#6
GTsetGO Cigar Assassin 2004 Mustang GT 12.88 @ 112 Join Date: Aug 2005 Location: A Galaxy Far, Far Away Posts: 14,081 iTrader: 10 reviews	i am running a 100 shot on my car right now. I bought the kit from Summit and I also got the Genx2 kit which includes bottle heater, purge and what not. i also put the MSD digital rpm switch on it. i wanted it to be as safe as possible __________________ Cigar Samplers for Sale 2008 Acura TL-S - 2008 Honda Pilot EX-SE

August 2nd, 2008, 06:16 PM	#8
rugbyguitargod Newbie '01 GT Vert 13.5@108 mph Join Date: Jun 2008 Location: Fayetteville, NC Posts: 33 iTrader: 0 reviews	i just sprayed my 75 wet shot on my engine for the first time last night and it was pretty good. ran a 13.5@108 mph with just an intake and exhaust. by the trap speed, i can get another .2 lower if i got the launch better. running a NX kit with WOT switch and analog window switch __________________ Cars: 2005 Dodge SRT-4. LS3 'vette killer. Big turbo, big boost, big fuel, shit transmission SOON-TO-BE 03 COBRA OWNER 440 WHP, Bassani X-pipe, MAC SRI, Flowmaster 2-chambers, 2.76 pulley, Pro 5.0 shifter

August 2nd, 2008, 06:42 PM	#9
forensicsteve Hardcore Enthusiast Join Date: Sep 2006 Posts: 1,283 iTrader: 0 reviews	Experimenting with a 200 wet NX system. Only trying a 50 shot at present. We knew something was not quite right since purge only worked with engine off. Gave it a (50) shot anyway. It did decrease 1/8 mile by one tenth and added 3 mph. Had to abort pass at the end due to sputtering (melted plug). Did improve 1/4 mile ET by 2/10 but mph was way off. It was a fuel safety cut-off switch issue. Working now but not been back to track for another go. Only try 50 shot again until satisfied that all is working well. Have thoughts about 75 at launch + another 75 down the road....in addition to the turbo @ 20 lbs. Got a few pics but did not do install, so cannot comment. Last edited by forensicsteve; August 2nd, 2008 at 06:44 PM.

September 5th, 2007, 12:25 AM	#2
Bhblondguy Hardcore Enthusiast 2005 Mustang GT 12.00@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 1,234 iTrader: 0 reviews	and is the plate system better than the nozzle in the intake in front of the throttle body

September 5th, 2007, 01:15 PM	#3
Bhblondguy Hardcore Enthusiast 2005 Mustang GT 12.00@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 1,234 iTrader: 0 reviews	anyone?

September 5th, 2007, 01:24 PM	#5
Bhblondguy Hardcore Enthusiast 2005 Mustang GT 12.00@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 1,234 iTrader: 0 reviews	what was the cost of that kit and what do you have besides the bottle? ...remote opener,blow down valve,bottle heater etc. did you intall this yourself or have someone do it for you and what size shot are you running

September 5th, 2007, 02:45 PM	#7
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,144 iTrader: 0 reviews	NX

August 2nd, 2008, 07:08 PM	#10
Bhblondguy Hardcore Enthusiast 2005 Mustang GT 12.00@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 1,234 iTrader: 0 reviews	this is an older thread but...that's quite a beast you've got there steve.

August 2nd, 2008, 07:32 PM	#11
forensicsteve Hardcore Enthusiast Join Date: Sep 2006 Posts: 1,283 iTrader: 0 reviews	Was not paying attention to the post dates It's the extreme heat and humidity right now, that caused us to try N20. Cool the iat and boost the oxygen level diminished by the humidity. Seems like it was working well, even with just a 50 shot. Never know what that 1/4 mile might have been...lol

August 2nd, 2008, 07:50 PM	#12
rugbyguitargod Newbie '01 GT Vert 13.5@108 mph Join Date: Jun 2008 Location: Fayetteville, NC Posts: 33 iTrader: 0 reviews	wow, i didn't realize how old it was either haha __________________ Cars: 2005 Dodge SRT-4. LS3 'vette killer. Big turbo, big boost, big fuel, shit transmission SOON-TO-BE 03 COBRA OWNER 440 WHP, Bassani X-pipe, MAC SRI, Flowmaster 2-chambers, 2.76 pulley, Pro 5.0 shifter

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: best brand for N20
Thread	Thread Starter	Forum	Replies	Last Post
what brand CAI would u go with???	red97	96-98	55	October 24th, 2007 10:32 PM
TB Brand.	Dawgfude03GT	99-04	5	September 25th, 2007 09:19 AM
Which Brand????	Kosinski	96-98	13	September 7th, 2007 03:17 PM
brand new stang	maverick	2005 - 2010	28	January 12th, 2007 10:05 AM

All times are GMT -4. The time now is 08:48 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.