Oil Pressure Gauge Question

Pastor J · September 5th, 2007, 01:08 PM

I'm new to this so please don't shoot the messanger if this has been gone over before. I just put an a-pillar pod gauge setup in my car and I'm trying to put in an Oil Pressure Gauge.

My question is, I've got a Roush Stage 3 that is supercharged and I'm trying to find where to install the sender unit.

Also, I want to power the lights on it off of my dash lights so the lights come on when the dash lights come on. Does anyone know what line I need to hook into for that to happen?

Any help would be appreciated.

1FastFox · September 5th, 2007, 02:36 PM

Im not really sure about where to tap the guage into. But I run my guages off the dimmer switch that way not only do they light up but also dim with the interior. I put an inline fuse on my ( prolly overkill, but safe ) line b/w the guages and dimmer switch.

Emay · September 5th, 2007, 02:49 PM

Fast did similar to myself in going after the dimmer, if you have a test light it's a easy find. I forget what color the wire was, I remember green for some reason, but I'm guessing at this point.

For the sender, see this thread.. tells you exactly where to go with pics:

http://www.modularfords.com/forums/f...ace-55363.html

1FastFox · September 5th, 2007, 03:08 PM

Its funny that your mention green, caus that was what I was thinking just didnt want to say it without being sure ( which Im still not ), just probe a test light into the back of the switch and see which one lights up, also your test light will dim as you turn the switch.

Pastor J · September 5th, 2007, 03:20 PM

Thanks guys! I'll have to check and see if there is a green there. I know that the green in the ignition wiring is the one I had to splice into for my push button start. I'll take it apart tonight after church and check it out.

Did you run ground to a screw or attach it into the dimmer switch wiring some way?

1FastFox · September 5th, 2007, 03:28 PM

I make a new ground for it...

Grabber523 · September 6th, 2007, 12:25 AM

Originally Posted by Pastor J

Thanks guys! I'll have to check and see if there is a green there. I know that the green in the ignition wiring is the one I had to splice into for my push button start. I'll take it apart tonight after church and check it out.

Did you run ground to a screw or attach it into the dimmer switch wiring some way?

Grounded all my gauges to the dash behind the dimmer...I think the wire i used for dimming the gauge lights was black with either a green or purple stripe...the car's 7,300 miles away, so i can't go check...sorry

September 5th, 2007, 01:08 PM	#1
Pastor J Regular Join Date: Sep 2007 Location: Maryville, TN Posts: 222 iTrader: 0 reviews	Oil Pressure Gauge Question I'm new to this so please don't shoot the messanger if this has been gone over before. I just put an a-pillar pod gauge setup in my car and I'm trying to put in an Oil Pressure Gauge. My question is, I've got a Roush Stage 3 that is supercharged and I'm trying to find where to install the sender unit. Also, I want to power the lights on it off of my dash lights so the lights come on when the dash lights come on. Does anyone know what line I need to hook into for that to happen? Any help would be appreciated. __________________ www.mustangministries.net

September 5th, 2007, 02:36 PM	#2
1FastFox Skirt Chasing Phallus Phondler Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 10,483 iTrader: 4 reviews	Im not really sure about where to tap the guage into. But I run my guages off the dimmer switch that way not only do they light up but also dim with the interior. I put an inline fuse on my ( prolly overkill, but safe ) line b/w the guages and dimmer switch. __________________ QUOTE OF THE DAY (5/25/12): “Don’t play what’s there, play what’s not there.” ‐ Miles Davis

September 5th, 2007, 02:49 PM	#3
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,684 iTrader: 3 reviews	Fast did similar to myself in going after the dimmer, if you have a test light it's a easy find. I forget what color the wire was, I remember green for some reason, but I'm guessing at this point. For the sender, see this thread.. tells you exactly where to go with pics: http://www.modularfords.com/forums/f...ace-55363.html __________________ FLICKR Unique Imagery

September 5th, 2007, 03:08 PM	#4
1FastFox Skirt Chasing Phallus Phondler Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 10,483 iTrader: 4 reviews	Its funny that your mention green, caus that was what I was thinking just didnt want to say it without being sure ( which Im still not ), just probe a test light into the back of the switch and see which one lights up, also your test light will dim as you turn the switch. __________________ QUOTE OF THE DAY (5/25/12): “Don’t play what’s there, play what’s not there.” ‐ Miles Davis

September 5th, 2007, 03:20 PM	#5
Pastor J Regular Join Date: Sep 2007 Location: Maryville, TN Posts: 222 iTrader: 0 reviews	Thanks guys! I'll have to check and see if there is a green there. I know that the green in the ignition wiring is the one I had to splice into for my push button start. I'll take it apart tonight after church and check it out. Did you run ground to a screw or attach it into the dimmer switch wiring some way? __________________ www.mustangministries.net

September 5th, 2007, 03:28 PM	#6
1FastFox Skirt Chasing Phallus Phondler Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 10,483 iTrader: 4 reviews	I make a new ground for it... __________________ QUOTE OF THE DAY (5/25/12): “Don’t play what’s there, play what’s not there.” ‐ Miles Davis

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Oil Pressure Gauge Question
Thread	Thread Starter	Forum	Replies	Last Post
fuel pressure gauge	dr.gonzo!	5.0 Mustangs	10	May 4th, 2010 04:12 PM
Fuel pressure Gauge question.	DrHolliday	99-04	5	June 2nd, 2007 02:46 PM
Electric Fuel Pressure Gauge question	hawks05	99-04	3	March 10th, 2007 05:57 PM
Problems With Oil Pressure Gauge... Need Help!	chase	5.0 Mustangs	4	February 9th, 2007 06:25 PM
Fuel Pressure gauge sensor	Gosh	99-04	0	August 22nd, 2006 11:02 AM

All times are GMT -4. The time now is 09:58 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.