lookin for valve springs...

Modern_Muscle · September 17th, 2007, 03:17 AM

anyone know where I can get a good deal on new valve springs? might go with the springs with titanium retainers, but unsure yet...
what do yall think?

Grabber523 · September 17th, 2007, 03:46 AM

you running a higher lift cam or raising your rev limiter?

Modern_Muscle · September 17th, 2007, 04:02 AM

limiters already raised with the re-tune
Found some at BlowBy (yes I know)
Comp Beehives with titanium retainers, I think im getting those

Plans are as follows (in the next 3 months while she sits in the winter)
MMR Custom Head Porting
Crane Stage 3 or 4 cams
Comp Beehives with Titanium Retainers
Nitrous Express Wet 100 Shot, 125 shot when plate system comes out

hopefully thatll be done soon, maybe even a driveshaft.

This month should be my spec aluminum flywheel, Centerforce DFX Clutch, Steeda Tri-Ax, and My tranny finally fixed.

TheUNZippee! · September 17th, 2007, 07:15 AM

DoiNk.

Not sure if these are priced any cheaper than you have found.

Nameless · September 17th, 2007, 11:34 AM

Hey Zip, that avatar is SO freaking DISTRACTING!!! I've forgotten what the topic was for this post.....

Modern_Muscle · September 17th, 2007, 05:07 PM

blowbyracing zip, like 269...

GT/CS · September 19th, 2007, 06:35 AM

Just get some Ford racing heads and they come with the valve train, haha! Actually....for the $ it's a really well priced deal. Good luck at cranking the R's! What's your limiter raised to?

rondaw3g0410 · September 19th, 2007, 01:58 PM

Well, I got my Cams, springs and retainers from lethal performance all together 965.00 + shipping

leebunnyz · September 20th, 2007, 08:02 PM

Originally Posted by rondaw3g0410

Well, I got my Cams, springs and retainers from lethal performance all together 965.00 + shipping

did you install them yet?

September 17th, 2007, 03:17 AM	#1
Modern_Muscle Hardcore Enthusiast Join Date: Jan 2007 Location: Texas Posts: 1,347 iTrader: 1 reviews	lookin for valve springs... anyone know where I can get a good deal on new valve springs? might go with the springs with titanium retainers, but unsure yet... what do yall think? __________________ 1998 Trans Am WS6. (Anti Venom) Forged 347, stage 3 T56, and a 76mm Turbo... 659rwhp @ 13.5# ~725rwhp @ 15.5# Meth, C16, and 20psi coming soon 03 Z71 (H/C/I/E/T)...sold 2005 GT, Full Bolt-Ons...12's... GONE

September 17th, 2007, 03:46 AM	#2
Grabber523 Your Mom's Favorite 2007 Mustang GT Eats Chevys, Shits Imports... Join Date: Mar 2007 Location: Scott AFB, Illinois Posts: 2,487 iTrader: 0 reviews	you running a higher lift cam or raising your rev limiter? __________________ http://www.moddedmustangs.com/forums...p-vote-me.html TEAM RICER GT CREW MEMBER (11 SECOND RIDE WITH A 12 SECOND DRIVER) MEMBERS AGAINST MEMBERS AGAINST STUFF CREW FOUNDER TRUNK MONKEY CREW FOUNDER

September 17th, 2007, 04:02 AM	#3
Modern_Muscle Hardcore Enthusiast Join Date: Jan 2007 Location: Texas Posts: 1,347 iTrader: 1 reviews	limiters already raised with the re-tune Found some at BlowBy (yes I know) Comp Beehives with titanium retainers, I think im getting those Plans are as follows (in the next 3 months while she sits in the winter) MMR Custom Head Porting Crane Stage 3 or 4 cams Comp Beehives with Titanium Retainers Nitrous Express Wet 100 Shot, 125 shot when plate system comes out hopefully thatll be done soon, maybe even a driveshaft. This month should be my spec aluminum flywheel, Centerforce DFX Clutch, Steeda Tri-Ax, and My tranny finally fixed. __________________ 1998 Trans Am WS6. (Anti Venom) Forged 347, stage 3 T56, and a 76mm Turbo... 659rwhp @ 13.5# ~725rwhp @ 15.5# Meth, C16, and 20psi coming soon 03 Z71 (H/C/I/E/T)...sold 2005 GT, Full Bolt-Ons...12's... GONE

September 17th, 2007, 07:15 AM	#4
TheUNZippee! Moderator Join Date: Jan 2007 Location: Canada Posts: 61,816 Blog Entries: 1 iTrader: 0 reviews	DoiNk. Not sure if these are priced any cheaper than you have found. __________________

September 17th, 2007, 11:34 AM	#5
Nameless Doctor of Jurisprudence 2005 Mustang GT Join Date: Mar 2007 Location: Republic of Texas Posts: 2,815 Blog Entries: 1 iTrader: 0 reviews	Hey Zip, that avatar is SO freaking DISTRACTING!!! I've forgotten what the topic was for this post..... __________________ Me -----><----- You Nameless's s197 Write-Ups

September 17th, 2007, 05:07 PM	#6
Modern_Muscle Hardcore Enthusiast Join Date: Jan 2007 Location: Texas Posts: 1,347 iTrader: 1 reviews	blowbyracing zip, like 269... __________________ 1998 Trans Am WS6. (Anti Venom) Forged 347, stage 3 T56, and a 76mm Turbo... 659rwhp @ 13.5# ~725rwhp @ 15.5# Meth, C16, and 20psi coming soon 03 Z71 (H/C/I/E/T)...sold 2005 GT, Full Bolt-Ons...12's... GONE

September 19th, 2007, 06:35 AM	#7
GT/CS Regular Join Date: May 2007 Location: Wisconsin Posts: 122 iTrader: 0 reviews	Just get some Ford racing heads and they come with the valve train, haha! Actually....for the $ it's a really well priced deal. Good luck at cranking the R's! What's your limiter raised to? __________________ Ford Racing heads, Comp stage III cams, 4.10's, Steeda delete plates, SLP long tube headers, Custom 3'' X pipe, Magna flow 3" Magnapacks, Airaid CAI, SCT XCAL 2 93 tune, Steeda front and rear swaybars, Dynotech aluminum driveshaft, HTP TB spacer

September 19th, 2007, 01:58 PM	#8
rondaw3g0410 Newbie Join Date: Aug 2006 Posts: 25 iTrader: 0 reviews	Well, I got my Cams, springs and retainers from lethal performance all together 965.00 + shipping

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: lookin for valve springs...
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow Track heat valve springs?	Tony_90fox	5.0 Mustangs	2	June 23rd, 2007 02:31 PM
Finally..........valve springs have shown up!	1slo5.0	The Clubhouse	25	June 20th, 2007 09:50 PM
removing valve springs	stangthang15	99-04	1	May 22nd, 2007 03:49 PM
Stock Valve Springs	flamed 98 gt	99-04	0	March 20th, 2007 12:01 PM
Valve Springs Needed?	metu107	2005 - 2010	1	November 30th, 2006 03:35 AM

All times are GMT -4. The time now is 10:17 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.