07 GT/CS Stickers

Heather · November 27th, 2007, 02:20 AM

I have a stock sticker kit running down both sides of my car. I want to get rid of them and put somthing in there place. Any ideas? If you could post pictures with your ideas that be even better.

07 STROKER · November 27th, 2007, 10:20 AM

Im always thinking of ways to make my GT stand out just a bit from everyone else. I think removing those stickers are a good idea. A good replacement might be those sixer badges...they look good and will confuse people when you step on it from a light

Monark · November 27th, 2007, 10:39 AM

Originally Posted by 07 procharger

Im always thinking of ways to make my GT stand out just a bit from everyone else. I think removing those stickers are a good idea. A good replacement might be those sixer badges...they look good and will confuse people when you step on it from a light

Those pony emblems are really cool, much nicer than just the GT logo. When I was planning on getting a mustang that was gonna be my first mod.

07 STROKER · November 27th, 2007, 10:41 AM

I had a 83 LX with a 351 windsor it in back in the day...I took off the 5.0 badges and put question marks in their place...man did i get into alot of races over that...ha ha it was a good mod!!

Heather · November 27th, 2007, 02:31 PM

I dont want to put sixers on my car. I want people to know I have some power and know i;m not afraid to use it.

Richard_97222 · November 27th, 2007, 02:44 PM

The GT fender emblem has a allignment nub that fits into the hole on the fender right? So if replacing the GT emblem with the standard mustang emblem,... does the standard emblem have the same allignment nub as well?

BWAL · November 27th, 2007, 03:14 PM

what about replacing the sticker with GT badges?

07 STROKER · November 27th, 2007, 03:16 PM

dont know if there is a nub or not...I thought it was just two sided tape now?

joeice14 · November 27th, 2007, 04:55 PM

When I totalled my 6xer i pealed off the pastic badges... NO nub...

07 STROKER · November 27th, 2007, 06:01 PM

Maybee a nice GT/CS badge to replace the sticker would look nice...there are lots of options.

Emay · November 27th, 2007, 06:30 PM

Originally Posted by Richard_97222

The GT fender emblem has a allignment nub that fits into the hole on the fender right? So if replacing the GT emblem with the standard mustang emblem,... does the standard emblem have the same allignment nub as well?

The GT fenders have two verticle alignment holes in them so the emblem itself can be put on the vehicle during production by a person with no brain. Least that's what I tell myself anyway.

If you pull the badge you have to be sure to find something that covers both holes.

07 STROKER · November 27th, 2007, 06:32 PM

holes in the fender...thats

psycho bob · November 27th, 2007, 08:32 PM

can't say i would remove the stickers. you have a specialty car and in the long run i think it will keep more of it's value. at the same time if you plan to keep it that long chances are you'll need a repaint anyway. for different badges how about the ford racing ones......powered by ford

HawkCrewchief · November 27th, 2007, 11:20 PM

Originally Posted by psycho bob

can't say i would remove the stickers. you have a specialty car and in the long run i think it will keep more of it's value.

you have a car that not many people have so u in a way you are already set apart from the pack, why change that? I think the my badges

since they fade into the paint and my car is black already it looks like a ghostly image...

HawkCrewchief · November 27th, 2007, 11:20 PM

p.s. thanks for popping my newbie cherry i am now a REGULAR!!!!!

psycho bob · November 28th, 2007, 12:36 AM

wish you didn't have to get the 2 tone interior with the CS package. i'd like just the seats to be 2 tone

JohnC · November 28th, 2007, 12:43 AM

You might want a custom job from a place like sticker dude.

Sticker Dude Designs - Creators of Vinyl Chaos

HawkCrewchief · November 28th, 2007, 12:56 AM

is a 300E is that just something he wanted on his car or something? im confused about the stickers on that silver stang up there...?

Drick · November 28th, 2007, 01:20 AM

NOS stickers for the win

Come on guys back me on this

November 27th, 2007, 02:20 AM	#1
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: In your girlfriends panties Posts: 729 iTrader: 0 reviews	07 GT/CS Stickers I have a stock sticker kit running down both sides of my car. I want to get rid of them and put somthing in there place. Any ideas? If you could post pictures with your ideas that be even better. __________________

November 27th, 2007, 10:20 AM	#2
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	Im always thinking of ways to make my GT stand out just a bit from everyone else. I think removing those stickers are a good idea. A good replacement might be those sixer badges...they look good and will confuse people when you step on it from a light __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 27th, 2007, 10:41 AM	#4
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	I had a 83 LX with a 351 windsor it in back in the day...I took off the 5.0 badges and put question marks in their place...man did i get into alot of races over that...ha ha it was a good mod!! __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 27th, 2007, 02:31 PM	#5
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: In your girlfriends panties Posts: 729 iTrader: 0 reviews	I dont want to put sixers on my car. I want people to know I have some power and know i;m not afraid to use it. __________________

November 27th, 2007, 03:14 PM	#7
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,638 Blog Entries: 2 iTrader: 4 reviews	what about replacing the sticker with GT badges? __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

November 27th, 2007, 02:44 PM	#6
Richard_97222 Newbie 2007 Mustang GT 13.70@103MPH Join Date: Nov 2007 Location: Portland, Oregon Posts: 47 iTrader: 0 reviews	The GT fender emblem has a allignment nub that fits into the hole on the fender right? So if replacing the GT emblem with the standard mustang emblem,... does the standard emblem have the same allignment nub as well?

November 27th, 2007, 03:16 PM	#8
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	dont know if there is a nub or not...I thought it was just two sided tape now? __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 27th, 2007, 04:55 PM	#9
joeice14 Hardcore Enthusiast 2006 Mustang GT Join Date: Oct 2006 Location: new york Posts: 1,657 iTrader: 2 reviews	When I totalled my 6xer i pealed off the pastic badges... NO nub... __________________ Mods: Some Intake Shit...

November 27th, 2007, 06:01 PM	#10
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	Maybee a nice GT/CS badge to replace the sticker would look nice...there are lots of options. __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 27th, 2007, 06:32 PM	#12
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	holes in the fender...thats __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

November 27th, 2007, 11:20 PM	#15
HawkCrewchief Regular Join Date: Jul 2007 Location: South Florida Posts: 59 iTrader: 0 reviews	p.s. thanks for popping my newbie cherry i am now a REGULAR!!!!! __________________ 2007 Mustang GT California Special Black, Two tone leather interior, Shaker 500, GTS Black Out Tail Lights 5% tint all windows "Carpe Diem" Seize the Day for tomorrow we die.

November 28th, 2007, 12:43 AM	#17
JohnC Enthusiast 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 886 iTrader: 1 reviews	You might want a custom job from a place like sticker dude. Sticker Dude Designs - Creators of Vinyl Chaos __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage

November 28th, 2007, 12:56 AM	#18
HawkCrewchief Regular Join Date: Jul 2007 Location: South Florida Posts: 59 iTrader: 0 reviews	is a 300E is that just something he wanted on his car or something? im confused about the stickers on that silver stang up there...? __________________ 2007 Mustang GT California Special Black, Two tone leather interior, Shaker 500, GTS Black Out Tail Lights 5% tint all windows "Carpe Diem" Seize the Day for tomorrow we die.

November 28th, 2007, 01:20 AM	#19
Drick Big timin' in a small town 2004 FX4 F150, 86 GT Join Date: Apr 2007 Location: Gods country. Nordern Michigan eh Posts: 14,336 iTrader: 1 reviews	NOS stickers for the win Come on guys back me on this __________________ FX4 Crew Crew member #1 Don't take anything I say to heart, I don't try to come off as an asshole. It just happens

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 07 GT/CS Stickers
Thread	Thread Starter	Forum	Replies	Last Post
stickers	01 mustang	Visual	8	May 4th, 2008 12:59 AM
can someone get me some MM stickers??	Blk01ponyGT	99-04	12	September 5th, 2007 07:10 PM
mm stickers	232stang	The Clubhouse	20	March 20th, 2007 01:14 AM
MM stickers?	97CobraSvt	The Clubhouse	25	October 9th, 2006 06:17 AM
MM stickers	itschristorres8	The Clubhouse	11	September 15th, 2006 12:57 PM

All times are GMT -4. The time now is 10:59 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.