JBA Headers vs BBK headers

06GTMustang89 · March 17th, 2008, 11:00 PM

Both are longtube and both off road x or h pipe

JBA's are Stainless Steel

BBK's are Ceramic

give me your opinions between the two

leebunnyz · March 17th, 2008, 11:01 PM

if your trying to save a few bucks and there is good feedback about BBK's then thats your answer.

06GTMustang89 · March 17th, 2008, 11:09 PM

its only 80 bucks difference so im just wondering haha which is better

07stanggt · March 17th, 2008, 11:26 PM

how much are they?

06GTMustang89 · March 17th, 2008, 11:27 PM

BBK's are 700 including off road x pipe
JBA's are 739.99 including off road H pipe

my bad a 40 difference

07stanggt · March 17th, 2008, 11:32 PM

you ever look a mac headers? and do you want cats or no cats?

07stanggt · March 17th, 2008, 11:36 PM

nevermind you said offroad. you could get mac ceramic long tubes with a catted x for cheaper then that.

06GTMustang89 · March 17th, 2008, 11:39 PM

i really want both so i can switch it out so i want to get the offroad now then the catted one when i go in for emissions

Brenspeed has the whole deal wtih MAC lt headers and the mid pipe for 929

07stanggt · March 17th, 2008, 11:44 PM

thats with the prochamber from bresnspeed is that what you want?

06GTMustang89 · March 17th, 2008, 11:46 PM

if they were hte same price as the BBK's and hte JBA's then yeah but the MAC's are 200 bucks more

07stanggt · March 17th, 2008, 11:47 PM

when are you ready to buy?

06GTMustang89 · March 17th, 2008, 11:48 PM

thursday or friday thats why im gettin my research done...Are MAC's that much better than JBA and BBK??

07stanggt · March 17th, 2008, 11:52 PM

i dont know. but when your ready to buy pm me. i dont want to go into on here but lets just say i know where you can get the mac long tubes with pro chamber, same set up as brenspeed for 836.90 and mabye even less.

mac headers themselves are 446. what are the bbk and jba long tubes by themselves.

07stanggt · March 17th, 2008, 11:55 PM

remember the prochamber is going to cost you more then the o/r x pipe set up. so in that sense your comparing apples to oranges. thats hey i ask what the jba's and bbk's cost by themselves? is that where your looking brenspeed?

06GTMustang89 · March 17th, 2008, 11:56 PM

BBK's are 529.99 ceramic coated americanmuscle.com 700 (after discount) for headers and x pipe

JBA's SS are 579.99 stage3motorsports.com 739.99 with h pipe

How much of a difference is Stainless Steal finish to Ceramic?? is ceramic that much better??

07stanggt · March 17th, 2008, 11:59 PM

yea well the mac ceramic coated headers are 446.95 then whatever midpipe setup you choose. the macs are cheaper, i think they are just as good but you can ask around.

07stanggt · March 18th, 2008, 12:01 AM

ceramic will keep in the heat better. the purpose being to keep the temp in your engine bay down.

06GTMustang89 · March 18th, 2008, 12:02 AM

Gotcha damn this is a hard decision...i heard the JBA kit is really good quality and BBK has been around forever in mustangs so damnit this is hard haha

07stanggt · March 18th, 2008, 12:04 AM

LOL. Let me know whatever you decide. by the end of this week i might be able to help you get a deal on whatever you chose. just pm me.

Grabber523 · March 18th, 2008, 12:05 AM

Originally Posted by 07stanggt

ceramic will keep in the heat better. the purpose being to keep the temp in your engine bay down.

Ceramic keeps the velocity of the expelled gasses up by keeping the heat energy in the header pipes, helping the exhaust scavenging effect, drawing the fresh air and fuel into the cylinders during valve overlap at high rpms, increasing peak hp.

March 17th, 2008, 11:00 PM	#1
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	JBA Headers vs BBK headers Both are longtube and both off road x or h pipe JBA's are Stainless Steel BBK's are Ceramic give me your opinions between the two __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:01 PM	#2
leebunnyz MM Fanatic Join Date: Feb 2007 Location: Vineland, NJ Posts: 3,583 iTrader: 0 reviews	if your trying to save a few bucks and there is good feedback about BBK's then thats your answer. __________________ Jesus Christ is #1 "The Founder Of Crews"

March 17th, 2008, 11:09 PM	#3
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	its only 80 bucks difference so im just wondering haha which is better __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:27 PM	#5
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	BBK's are 700 including off road x pipe JBA's are 739.99 including off road H pipe my bad a 40 difference __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:39 PM	#8
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	i really want both so i can switch it out so i want to get the offroad now then the catted one when i go in for emissions Brenspeed has the whole deal wtih MAC lt headers and the mid pipe for 929 __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:26 PM	#4
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	how much are they?

March 17th, 2008, 11:32 PM	#6
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	you ever look a mac headers? and do you want cats or no cats?

March 17th, 2008, 11:36 PM	#7
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	nevermind you said offroad. you could get mac ceramic long tubes with a catted x for cheaper then that.

March 17th, 2008, 11:44 PM	#9
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	thats with the prochamber from bresnspeed is that what you want?

March 17th, 2008, 11:46 PM	#10
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	if they were hte same price as the BBK's and hte JBA's then yeah but the MAC's are 200 bucks more __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:47 PM	#11
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	when are you ready to buy?

March 17th, 2008, 11:48 PM	#12
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	thursday or friday thats why im gettin my research done...Are MAC's that much better than JBA and BBK?? __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 17th, 2008, 11:52 PM	#13
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	i dont know. but when your ready to buy pm me. i dont want to go into on here but lets just say i know where you can get the mac long tubes with pro chamber, same set up as brenspeed for 836.90 and mabye even less. mac headers themselves are 446. what are the bbk and jba long tubes by themselves.

March 17th, 2008, 11:55 PM	#14
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	remember the prochamber is going to cost you more then the o/r x pipe set up. so in that sense your comparing apples to oranges. thats hey i ask what the jba's and bbk's cost by themselves? is that where your looking brenspeed?

March 17th, 2008, 11:56 PM	#15
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	BBK's are 529.99 ceramic coated americanmuscle.com 700 (after discount) for headers and x pipe JBA's SS are 579.99 stage3motorsports.com 739.99 with h pipe How much of a difference is Stainless Steal finish to Ceramic?? is ceramic that much better?? __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more. Last edited by 06GTMustang89; March 17th, 2008 at 11:58 PM.

March 17th, 2008, 11:59 PM	#16
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	yea well the mac ceramic coated headers are 446.95 then whatever midpipe setup you choose. the macs are cheaper, i think they are just as good but you can ask around.

March 18th, 2008, 12:01 AM	#17
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	ceramic will keep in the heat better. the purpose being to keep the temp in your engine bay down.

March 18th, 2008, 12:02 AM	#18
06GTMustang89 MM Fanatic 2006 Mustang GT 6spd 12.61@109mph Join Date: Sep 2007 Location: North Carolina Posts: 3,181 iTrader: 0 reviews	Gotcha damn this is a hard decision...i heard the JBA kit is really good quality and BBK has been around forever in mustangs so damnit this is hard haha __________________ JLT CAI: KOOKS LT's: Comp NSR II's: 4.56's: TR6060: Steeda LCA, UCA: QA1's: Roush rear springs...see garage for more.

March 18th, 2008, 12:04 AM	#19
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	LOL. Let me know whatever you decide. by the end of this week i might be able to help you get a deal on whatever you chose. just pm me.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: JBA Headers vs BBK headers
Thread	Thread Starter	Forum	Replies	Last Post
Long tube headers or short tube headers?	2much4u	99-04	20	October 11th, 2009 10:49 PM
Headers	96GtGoodz	Modular Mustangs	6	November 13th, 2007 06:38 PM
GT 40 P Headers	1BADSTANG	5.0 Mustangs	13	November 12th, 2007 02:47 PM
Headers	jblood37	99-04	4	March 12th, 2007 05:57 AM
v6 headers etc.	ESG-642T	V6 Mustangs	0	March 1st, 2007 03:58 PM

All times are GMT -4. The time now is 06:41 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.