[06TYRFRYR]

New to Modded Mustangs and have been asked about my car so here is the scoop. Mods are as follows

1) air delivery- JltII cai, BBK twin 62 tb,

2) fuel delivery- stock with GT 500 twin pumps ready to install upon engine swap

3) ignition- MSD coils

4) internals- stock bottom end with frpp heads with comp springs & retainers, crower stage II cams

5) power adder- currently have zex nos set at 150 shot to bring the et down into the 10.90s with 1.490 60'. has ran 10.83 before suspension mods with 175 shot and drag radials spinning badly.

6) front suspension- coil overs w/175 lb springs, AJE K member & lca's, BMR sway bar delete

7) rear suspension- Eibach lowering springs, UPR lca's & track bar, Granetelli uca, lca relocation brackets

8) differential- 4.10 gears, moser axles

9) transmission- stock 5r55 with modified valve body and tune

10) tuner- Predator

11) chassis and interior- 8pt cage certified to 8.50, kirkey seats, auto meter gauges, nos pressure, fuel pressure, and wideband a/f, with boost and trans temp not installed yet. roll cage and custom rear seat delete made of .040 colored sheet aluminum made and installed by yours truly

12) Body and wheels- Bogart 15x10 and 15 x 3.5 wheels with M/T 28/12.50/15 et streets on rear. CDC aggressive chin spoiler and honeycomb decklid cover

[usafimj]

Welcome to MM. Looks like you got a pretty sweet set-up. Where in Oklahoma you from. I'm in OKC

[HMUSN]

Welcome to the forums.

[evan]

badass, i saw it at ford vs buick last year, very sick car!! who did all the tuning on the car? would help out alot with us local guys!!

[usafimj]

yo evan you from Oklahoma also. If so where

[BWAL]

welcome

[06TYRFRYR]

Thank you. Im from Stillwater. Just got back from Okc a little bit ago. just had my cage certified this morning. I race at Noble quite a bit and always make the Pro Street shootout. that is why I have my car dialed in to run 10.90s

[06TYRFRYR]

I originally used powerhouse to tune it, but the best I ever ran then was a 11.30. I do all my own tuning now and getting ready to buy a dyno in a few months. also building a 6.0 and hoping to have it in within a couple months

[evan]

i am here in okc, actually at penn and mem by all the hussle and bussle of the mall.

I guess i need to start going to TV this year, but work has me pretty busy, i hope to see your car next time i'm out there, i have a buddy with a black hatch goes to most pro street nights running9.60's on the small pills, who knows what it will do this year. He said the wreck was bad last friday and everyone had to leave, so he didn't get to finish out but made somemoney!!

[usafimj]

Originally Posted by evan i am here in okc, actually at penn and mem by all the hussle and bussle of the mall. I guess i need to start going to TV this year, but work has me pretty busy, i hope to see your car next time i'm out there, i have a buddy with a black hatch goes to most pro street nights running9.60's on the small pills, who knows what it will do this year. He said the wreck was bad last friday and everyone had to leave, so he didn't get to finish out but made somemoney!!

got a pic of your ride

[evan]

its a stock 07 silver gt lol......17 inch bullits....go to Oklahoma Deadhorse Mustangs and register and you can see all the sweet mustangs we had out today at the car show at Downtown Ford.

[06TYRFRYR]

yeah it was a bad wreck. I thought the guy was in serious trouble when it burst into flames sliding down the track on its roof at 120 mph but apparently he was able to get out on his own and no serious injuries

[usafimj]

Originally Posted by evan its a stock 07 silver gt lol......17 inch bullits....go to Oklahoma Deadhorse Mustangs and register and you can see all the sweet mustangs we had out today at the car show at Downtown Ford.

cool man. I'm a member of that site. my sn is the same as on here. sweet ride. I wanted to go to that. completely forgot about it

[nba1341]

love it