Panhard bar installed

menace07 · April 15th, 2008, 10:55 PM

Just finished installing my steeda adj. panhard bar and bar brace today. Install was very easy and parts look much better than factory pieces, plus i was able to center my rear again. Only problem I had was adjusting the jam nut on the passenger side once the bar was on. Anybody have any suggestions for this? I'll get pics of the finished product up as soon as I have time to wash it

texas_mustang · April 15th, 2008, 10:56 PM

should have done a write up

06RedfireGT · April 15th, 2008, 10:56 PM

Congrats man.

texas_mustang · April 15th, 2008, 10:58 PM

^ agreed

we should all start doing write ups on our installs so that we can start a bitching DIY forum

06RedfireGT · April 15th, 2008, 10:58 PM

Originally Posted by texas_mustang

^ agreed

we should all start doing write ups on our installs so that we can start a bitching DIY forum

Good idea.

IronStomach · April 15th, 2008, 11:00 PM

Originally Posted by 06RedfireGT

Good idea.

Damn good idea. Then I can kick back with a cold beer and just read your posts when I go to do my installs.

Oh, and congrats Menace!

texas_mustang · April 15th, 2008, 11:01 PM

^ exactly

i recommended it in the clubhouse... but the thread died after a few "good idea" comments

so next time you do an install, do a write up.

06RedfireGT · April 15th, 2008, 11:02 PM

I think it would be better to just have a stick in each section for it and when ever there ia new write up and mod can just add it to the sticky.

texas_mustang · April 15th, 2008, 11:04 PM

yea, another good idea.

we should make an "installs" sticky

i say as soon as we get at least 3 installs togeather we should PM a mod

IronStomach · April 15th, 2008, 11:06 PM

Originally Posted by texas_mustang

^ exactly

i recommended it in the clubhouse... but the thread died after a few "good idea" comments

so next time you do an install, do a write up.

I'd do that, but then I usually read Taco Bill's writeups and can't bring myself to even try a writeup after reading that... encylopedia.

Hey! You're right Texas, what we need is a MM version! With indecent language and MM humor.

Maybe he can call himself Burger Jean? Hrmm, maybe not the right name.

mustangrebuilder · April 15th, 2008, 11:11 PM

Originally Posted by texas_mustang

^ agreed

we should all start doing write ups on our installs so that we can start a bitching DIY forum

+ 234234234, we need a DIY section, i will be doing a write up on my grears, and cam install, and headers if you guys want it

IronStomach · April 15th, 2008, 11:16 PM

Originally Posted by mustangrebuilder

+ 234234234, we need a DIY section, i will be doing a write up on my grears, and cam install, and headers if you guys want it

Yes, please!

texas_mustang · April 15th, 2008, 11:18 PM

fuck yea. massive rep if you do that!

06RedfireGT · April 15th, 2008, 11:18 PM

Originally Posted by mustangrebuilder

+ 234234234, we need a DIY section, i will be doing a write up on my grears, and cam install, and headers if you guys want it

With how many questions there are about headers and cams a good in-depth write up would be awesome.

texas_mustang · April 15th, 2008, 11:18 PM

^ exactly

mustangrebuilder · April 15th, 2008, 11:26 PM

np, will be doing the headers this weekend if my xpipe get here by friday,that is a big if and the gears next weekend. so i do write ups on them, the cams you are going to have to wait alittle on, need some more money lol

texas_mustang · April 15th, 2008, 11:27 PM

lol its all good. and your doing the gear install yourself?

man, if you do a gear writeup on here youll be roll fat in rep haha

mustangrebuilder · April 16th, 2008, 12:03 AM

Originally Posted by texas_mustang

lol its all good. and your doing the gear install yourself?

man, if you do a gear writeup on here youll be roll fat in rep haha

lol, yeah i am doing the gear install my self, in my driveway, no lift, no nothing, the old fashion way.some card board,elbow grease,and maybe some beer got to ask dad to get it, being 18 cant get it yet lol,but i do all my own work on my car.

but i am def going to do a write up on it.

texas_mustang · April 16th, 2008, 12:17 AM

your 18?

i was gonna pay my friends dad a 12 pack of lone star to help me install it. but hes been in Iraq

mustangrebuilder · April 16th, 2008, 12:38 AM

yeah im 18, does that shock you??? lol

April 15th, 2008, 10:55 PM	#1
menace07 Enthusiast 2007 Mustang GT 13.7 @ 105 Join Date: Sep 2007 Posts: 818 iTrader: 0 reviews	Panhard bar installed Just finished installing my steeda adj. panhard bar and bar brace today. Install was very easy and parts look much better than factory pieces, plus i was able to center my rear again. Only problem I had was adjusting the jam nut on the passenger side once the bar was on. Anybody have any suggestions for this? I'll get pics of the finished product up as soon as I have time to wash it __________________ black 07 GT, jlt2 cai, sct2 brenspeed 93 octane tune, UDP's, spydershaft, triax, magnaflow catted x, steeda axleback, bad ass steeda suspension Stealth GT Twin Turbo System On The Way!!!!!!! STEEDA SUSPENSION CREW FOUNDER

April 15th, 2008, 10:56 PM	#3
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,483 iTrader: 2 reviews	Congrats man. __________________ ΜΟΛΩΝ ΛΑΒΕ

April 15th, 2008, 11:02 PM	#8
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,483 iTrader: 2 reviews	I think it would be better to just have a stick in each section for it and when ever there ia new write up and mod can just add it to the sticky. __________________ ΜΟΛΩΝ ΛΑΒΕ

Threads Similar to: Panhard bar installed
Thread	Thread Starter	Forum	Replies	Last Post
MM Panhard Bar Quesion	bigloser	All Other Vehicles	3	December 18th, 2007 06:19 AM
leveling panhard bar	bigloser	General Tech	0	October 8th, 2007 12:13 PM
Panhard bar Question?	JAY'SRED02	2005 - 2010	8	July 31st, 2007 10:14 PM
panhard bar	msolaas1	2005 - 2010	2	July 23rd, 2007 09:02 AM

April 15th, 2008, 10:56 PM	#2
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	should have done a write up

April 15th, 2008, 10:58 PM	#4
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	^ agreed we should all start doing write ups on our installs so that we can start a bitching DIY forum

April 15th, 2008, 11:01 PM	#7
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	^ exactly i recommended it in the clubhouse... but the thread died after a few "good idea" comments so next time you do an install, do a write up.

April 15th, 2008, 11:04 PM	#9
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	yea, another good idea. we should make an "installs" sticky i say as soon as we get at least 3 installs togeather we should PM a mod

April 15th, 2008, 11:18 PM	#13
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	fuck yea. massive rep if you do that!

April 15th, 2008, 11:26 PM	#16
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 991 iTrader: 0 reviews	np, will be doing the headers this weekend if my xpipe get here by friday,that is a big if and the gears next weekend. so i do write ups on them, the cams you are going to have to wait alittle on, need some more money lol

April 15th, 2008, 11:27 PM	#17
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	lol its all good. and your doing the gear install yourself? man, if you do a gear writeup on here youll be roll fat in rep haha

April 16th, 2008, 12:17 AM	#19
texas_mustang Banned Join Date: Dec 2006 Posts: 2,075 iTrader: 0 reviews	your 18? i was gonna pay my friends dad a 12 pack of lone star to help me install it. but hes been in Iraq

April 16th, 2008, 12:38 AM	#20
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 991 iTrader: 0 reviews	yeah im 18, does that shock you??? lol

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 01:27 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.