removing rear seat and rear moulding?

07 STROKER · April 25th, 2008, 10:01 PM

Anyone have a write up or pics for removingthe rear seat and rear molding on these s-197's....im trying to run some wires from the trunk to the battery.

thanks

black05stxjt · April 25th, 2008, 10:06 PM

you putting the battery back there??

05mustang_TT_charged · April 25th, 2008, 10:08 PM

the rear seats are easy, in the middle of each seat below the seat is a little tab, you push it and pull up and then repeat on the other side

the panels are held on with push clips and you need to grab and pull straight out

but when the seats are out you can route the wires under the panels with out removing them

07 STROKER · April 25th, 2008, 11:06 PM

thanks KB...no im installing my bottle warmer

2006GTARPD3 · April 26th, 2008, 12:46 AM

These cars are easy to run wires through. Found that out when I put my system in awhile ago(dont have anymore) Just be careful when pulling off the panels if you do decide to do that. Use force, but not enough to crack or snap one

07 STROKER · April 26th, 2008, 01:29 AM

bottle warmer is in!

05mustang_TT_charged · April 26th, 2008, 01:33 AM

Originally Posted by 07 procharger

bottle warmer is in!

Cool, now go fill your bottle so your car can be fast again for a couple days

07 STROKER · April 26th, 2008, 12:35 PM

ooooooo....burn!!!!. Bottle is always full... i get it for free!! And I just started on another project for this thing but im not telling anyone about it yet

05mustang_TT_charged · April 26th, 2008, 12:59 PM

Originally Posted by 07 procharger

ooooooo....burn!!!!. Bottle is always full... i get it for free!! And I just started on another project for this thing but im not telling anyone about it yet

not even wittle o me

07 STROKER · April 26th, 2008, 02:28 PM

use your imagination...*points under your hood*

05mustang_TT_charged · April 26th, 2008, 03:51 PM

haha sweet, you getting a "Cold Air Kit" *wink wink*

07 STROKER · April 26th, 2008, 04:17 PM

yes...from Ebay

April 25th, 2008, 10:01 PM	#1
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	removing rear seat and rear moulding? Anyone have a write up or pics for removingthe rear seat and rear molding on these s-197's....im trying to run some wires from the trunk to the battery. thanks __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 25th, 2008, 10:06 PM	#2
black05stxjt Enthusiast 2005 GT 11.55@118.48 Join Date: Jan 2008 Location: Texas Posts: 722 iTrader: 0 reviews	you putting the battery back there?? __________________ 12.52@108.23/ 11.55@118.48 100 SHOT

April 25th, 2008, 10:08 PM	#3
05mustang_TT_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,774 iTrader: 0 reviews	the rear seats are easy, in the middle of each seat below the seat is a little tab, you push it and pull up and then repeat on the other side the panels are held on with push clips and you need to grab and pull straight out but when the seats are out you can route the wires under the panels with out removing them __________________ 350 rwhp and 310 rwtq at 6000 rpms through stock exhaust system 326 cubic inches of Twin Turbocharged hell will be running soon Tuned by Wes @ TPS

April 25th, 2008, 11:06 PM	#4
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	thanks KB...no im installing my bottle warmer __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 26th, 2008, 12:46 AM	#5
2006GTARPD3 Golf Pencil Kawk Juggler 2006 Mustang GT 509RWHP/450RWT Join Date: Feb 2008 Location: NY Posts: 2,391 iTrader: 0 reviews	These cars are easy to run wires through. Found that out when I put my system in awhile ago(dont have anymore) Just be careful when pulling off the panels if you do decide to do that. Use force, but not enough to crack or snap one __________________ Procharger D-1SC Kit - Pypes O/R H - FRPP Stingers Team Ricer GT Co-Founder

April 26th, 2008, 01:29 AM	#6
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	bottle warmer is in! __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 26th, 2008, 12:35 PM	#8
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	ooooooo....burn!!!!. Bottle is always full... i get it for free!! And I just started on another project for this thing but im not telling anyone about it yet __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 26th, 2008, 02:28 PM	#10
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	use your imagination...points under your hood __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

April 26th, 2008, 03:51 PM	#11
05mustang_TT_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,774 iTrader: 0 reviews	haha sweet, you getting a "Cold Air Kit" wink wink __________________ 350 rwhp and 310 rwtq at 6000 rpms through stock exhaust system 326 cubic inches of Twin Turbocharged hell will be running soon Tuned by Wes @ TPS

April 26th, 2008, 04:17 PM	#12
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	yes...from Ebay __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: removing rear seat and rear moulding?
Thread	Thread Starter	Forum	Replies	Last Post
Rear Sway / Stabilizer Bar removing	dreamr	5.0 Mustangs	4	April 23rd, 2008 11:47 PM
removing rear sidemarker lights	JaxnsGT	99-04	2	December 22nd, 2007 05:13 PM
Removing rear seat	Murderjetz	V6 Mustangs	28	July 19th, 2007 10:07 AM
removing axles from limited slip 7.5" rear end!???	Darrellx14	V6 Mustangs	0	December 4th, 2006 05:02 PM

All times are GMT -4. The time now is 01:06 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.