need help(emay)or anyone

mustangrebuilder · May 6th, 2008, 08:21 PM

ok so i have the c500 front bumper, and the middle sags!!!!

in the middle there is space between the bumper and the grill.

if you have this front bumper, how many screws when thought the bumper into the grill????

plz help thanks

Emay · May 6th, 2008, 08:56 PM

Do you have the billet grill from cervinis as well?

I have two screws on the bottom part of the billet grill holding it to the bumper.

Also, check and make sure the foam crash parts under the front bumper are still there. There's a top piece that provides a bit of support..

Here's a pic, all the black parts on top are what I'm asking you to make sure are still in place..

Emay · May 6th, 2008, 09:02 PM

If yours is bad, and you have two holes now holding it, get a 2/16" or 3/16" thick piece of steel at Home depot or menards, put holes in it where your screw holes line up with it, put it on the back side of the eurethane bumper and instead of screws, use small bolts to go through the grill, through the eurethan bumper, and then through the piece of steel. This will pull the eurethane bumper tighter to the grill for a better fit with little or no gap, and a bunch more support overall.

mustangrebuilder · May 6th, 2008, 09:25 PM

thanks man, i got hit and the body shop did it and i was in pa for school, they messed up all the body lines.

i am really just thinking about bringing it down to cervinis and having them fit up the body line.

i am not happy at all how the body shop did it.

Emay · May 6th, 2008, 09:34 PM

Are you talking about the fender lines as well?

mustangrebuilder · May 6th, 2008, 10:07 PM

yeah there is a gap

Emay · May 6th, 2008, 10:26 PM

If you want to play with it a little there is some adjustability at the fenders. Just 2 10mm nuts on each side hold the bumper on there. Loosen them, get the bumper where you want it and sinch them down. Sounds like the body shop didn't care all that much.. The covers fit great, almost impossible to have a shotty job with cervinis stuff..

Heather · May 6th, 2008, 10:27 PM

emay is my future husband.

Emay · May 6th, 2008, 10:31 PM

Oh really, and where the hell have you been???

mustangrebuilder · May 6th, 2008, 10:32 PM

yeah i know it really pissed me off, its not the fenders its the bumper is not up high enought

mustangrebuilder · May 6th, 2008, 10:34 PM

ill get some pictures tomorrow and show you so you can get a better idea of what i mean

Heather · May 6th, 2008, 10:34 PM

Originally Posted by Emay

Oh really, and where the hell have you been???

i've been lurking...So, when are we moving in together?

Emay · May 6th, 2008, 10:54 PM

I could use a sugar momma, done with school yet?

Heather · May 7th, 2008, 07:42 PM

Originally Posted by Emay

I could use a sugar momma, done with school yet?

Not done with school yet

Me?, a sugar momma?
Pshh, YOU, A SUGAR DADDY.

mustang fanatic · May 7th, 2008, 07:47 PM

Originally Posted by Heather

Not done with school yet

Me?, a sugar momma?
Pshh, YOU, A SUGAR DADDY.

Wow its so beautiful that two mustang lovers can find each other on a forum.

Jucostud · May 7th, 2008, 07:51 PM

Originally Posted by Heather

Not done with school yet

Me?, a sugar momma?
Pshh, YOU, A SUGAR DADDY.

sorry to bust your bubble, but emay and heavygt are already shacking up together

Heather · May 7th, 2008, 08:09 PM

whhhhaaa? This can't be true.

HEAVYGT · May 7th, 2008, 09:28 PM

Na...we don't shack up together, but he does love the smell of my cigar!!!

mustangrebuilder · May 7th, 2008, 09:30 PM

ok emay i got some pictures for you

mustangrebuilder · May 7th, 2008, 09:31 PM

and yes the car is dirty i know, lol, that what i get for leaving it out side.

but i have to have it fixed i cant take it anymore it is bothering me and i am not even going to bother bring it back to the body shop

May 6th, 2008, 08:21 PM	#1
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	need help(emay)or anyone ok so i have the c500 front bumper, and the middle sags!!!! in the middle there is space between the bumper and the grill. if you have this front bumper, how many screws when thought the bumper into the grill???? plz help thanks

May 6th, 2008, 08:56 PM	#2
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	Do you have the billet grill from cervinis as well? I have two screws on the bottom part of the billet grill holding it to the bumper. Also, check and make sure the foam crash parts under the front bumper are still there. There's a top piece that provides a bit of support.. Here's a pic, all the black parts on top are what I'm asking you to make sure are still in place.. __________________

May 6th, 2008, 09:02 PM	#3
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	If yours is bad, and you have two holes now holding it, get a 2/16" or 3/16" thick piece of steel at Home depot or menards, put holes in it where your screw holes line up with it, put it on the back side of the eurethane bumper and instead of screws, use small bolts to go through the grill, through the eurethan bumper, and then through the piece of steel. This will pull the eurethane bumper tighter to the grill for a better fit with little or no gap, and a bunch more support overall. __________________

May 6th, 2008, 09:34 PM	#5
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	Are you talking about the fender lines as well? __________________

May 6th, 2008, 10:26 PM	#7
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	If you want to play with it a little there is some adjustability at the fenders. Just 2 10mm nuts on each side hold the bumper on there. Loosen them, get the bumper where you want it and sinch them down. Sounds like the body shop didn't care all that much.. The covers fit great, almost impossible to have a shotty job with cervinis stuff.. __________________

May 6th, 2008, 09:25 PM	#4
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	thanks man, i got hit and the body shop did it and i was in pa for school, they messed up all the body lines. i am really just thinking about bringing it down to cervinis and having them fit up the body line. i am not happy at all how the body shop did it.

May 6th, 2008, 10:07 PM	#6
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	yeah there is a gap

May 6th, 2008, 10:27 PM	#8
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: In your girlfriends panties Posts: 729 iTrader: 0 reviews	emay is my future husband. __________________

May 6th, 2008, 10:31 PM	#9
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	Oh really, and where the hell have you been??? __________________

May 6th, 2008, 10:32 PM	#10
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	yeah i know it really pissed me off, its not the fenders its the bumper is not up high enought

May 6th, 2008, 10:34 PM	#11
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	ill get some pictures tomorrow and show you so you can get a better idea of what i mean

May 6th, 2008, 10:54 PM	#13
Emay May 08 ROTM 2008 Audi S6 Join Date: Oct 2006 Location: S. Elgin Posts: 6,637 iTrader: 3 reviews	I could use a sugar momma, done with school yet? __________________

May 7th, 2008, 08:09 PM	#17
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: In your girlfriends panties Posts: 729 iTrader: 0 reviews	whhhhaaa? This can't be true. __________________

May 7th, 2008, 09:28 PM	#18
HEAVYGT August 08 ROTM 2006 GT Kenne Bell S/C'd Join Date: Mar 2008 Location: Elgin, IL. Posts: 865 iTrader: 0 reviews	Na...we don't shack up together, but he does love the smell of my cigar!!! __________________ 2006 GT 2.6L Kenne Bell @ 10lbs boost tuned by Straight Line Performance "That car runs on race fuel? Oh, so you can't smoke in it or it would blow up, right?"

May 7th, 2008, 09:30 PM	#19
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	ok emay i got some pictures for you

May 7th, 2008, 09:31 PM	#20
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 992 iTrader: 0 reviews	and yes the car is dirty i know, lol, that what i get for leaving it out side. but i have to have it fixed i cant take it anymore it is bothering me and i am not even going to bother bring it back to the body shop

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: need help(emay)or anyone
Thread	Thread Starter	Forum	Replies	Last Post
hey emay	samstang	Midwest	3	March 11th, 2008 12:07 PM
Dear Emay,	Nameless	2005 - 2010	66	January 21st, 2008 04:15 AM
EMAY	07gtmustang	2005 - 2010	32	August 2nd, 2007 05:41 PM

All times are GMT -4. The time now is 09:16 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.