I'm catching up emay :)

Jucostud · June 2nd, 2008, 11:58 PM

Originally Posted by 1Nasty05

hey juco where did you buy our springs from??? and i was thinking of getting 20' rims 8.5 in front and 10 in the back do you think there would be any rubbing with the sportlines

I bought all my stuff from 07stanggt. There will be no rubbing issue as long as you get an adj. panhard bar.

80cj5fan · June 7th, 2008, 09:15 PM

How wide are your wheels? Have you expierenced any rubbing yet? Kepp up the good work!!!

stangNV · June 7th, 2008, 09:21 PM

my uncle has the frpp handling kit with 20's and 20x10 in the back and hes fitting 305x35x20 tires back there i think it is 35 it may be 25 one of those but yea...after these tires hes moving to 315's because he said they will fit with no rubbing

stangNV · June 7th, 2008, 09:22 PM

that info was to nasty lol

Jucostud · June 8th, 2008, 12:53 AM

my wheels are 20x8.5, but 20x10's will fit with no problem.

joeice14 · June 8th, 2008, 03:18 PM

Originally Posted by Jucostud

Thanks a lot man! I have 255/35/20's right now. Next time i get tires i'm going to go with a 275/40/20 and a 245/35/20 so i can get a little stagger. the wheels are 20in american racing rogue's.

Thanks again man! I love these springs!!!! It does take longer to get to work now though... all those damn speed bumps on my road. there is 5 speedbumps on my road and i scrap on 4 if i don't drive really slow. i need to see if i can tuck my exhaust up higher.

Dam that sucks you are scraping often... I ended up getting the pro-kit from a fellow member installing them myself and I have only scraped once or twice in around 200-300 miles Speed bumps and all..
I am pretty bummed my rear doesnt sit as low as yours so I am going to do thicker tires to close the gap... Also where do you scrape??? The under belly or front bumper???
I will have pictures up too show you my new drop soon.

-Joe

joeice14 · June 8th, 2008, 03:21 PM

Originally Posted by 80cj5fan

How wide are your wheels? Have you expierenced any rubbing yet? Kepp up the good work!!!

I cut to make a 90degree Right turn at 45mph at night while following directions and I got some wheel rubb out my back left tire.. Other then that I myself have never encountered it again...

June 8th, 2008, 12:53 AM	#125
Jucostud booooost'd 2007 Mustang Join Date: Nov 2006 Location: drink'n ur kool-aid Posts: 7,043 iTrader: 0 reviews	my wheels are 20x8.5, but 20x10's will fit with no problem. __________________ Jucostud's Official Build Thread 1988 LX HATCH 5.0 - FOR SALE $5,000 OBO 2007 vortech gt - SOLD! Looking for next project

Threads Similar to: I'm catching up emay :)
Thread	Thread Starter	Forum	Replies	Last Post
need help(emay)or anyone	mustangrebuilder	2005 - 2010	28	June 11th, 2008 12:05 PM
hey emay	samstang	Midwest	3	March 11th, 2008 11:07 AM
Dear Emay,	Nameless	2005 - 2010	66	January 21st, 2008 03:15 AM
Problem...New Brakes Not Catching at ALL	OcOnnor220	99-04	17	August 4th, 2007 08:59 PM
EMAY	07gtmustang	2005 - 2010	32	August 2nd, 2007 04:41 PM

June 7th, 2008, 09:15 PM	#122
80cj5fan Newbie Join Date: Mar 2008 Posts: 5 iTrader: 0 reviews	How wide are your wheels? Have you expierenced any rubbing yet? Kepp up the good work!!!

June 7th, 2008, 09:21 PM	#123
stangNV Regular 07 Mustang GT Join Date: Mar 2008 Location: Texas Posts: 337 iTrader: 0 reviews	my uncle has the frpp handling kit with 20's and 20x10 in the back and hes fitting 305x35x20 tires back there i think it is 35 it may be 25 one of those but yea...after these tires hes moving to 315's because he said they will fit with no rubbing

June 7th, 2008, 09:22 PM	#124
stangNV Regular 07 Mustang GT Join Date: Mar 2008 Location: Texas Posts: 337 iTrader: 0 reviews	that info was to nasty lol

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 01:43 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.