NSR cam write up.

2006greyGT · May 26th, 2008, 05:44 PM

OK... how do I get to page two... I knew I was stupid

07 STROKER · May 26th, 2008, 05:46 PM

go to the how to sticky at the top of 05+ sectoin

07stanggt · May 26th, 2008, 06:28 PM

good job can you email me this write up.

bkid · May 26th, 2008, 06:34 PM

Thank you , I will be doing this soon . This is much better than the black and white pages I was looking at.It sounds as if patience is the key with the spring tool ,when replacing the followers.

tribaltek · May 26th, 2008, 06:37 PM

So where would I get these tools, and how much do they cost?

What are the part #'s of everything I would have to buy?

This seems above my head, but if I can save $460, I might as well give it a go!

07 STROKER · May 26th, 2008, 06:40 PM

the wedge it tool # 303 1175

Spring compresser....shit hold on

07 STROKER · May 26th, 2008, 06:40 PM

303 1089 i believe...i gave to mustang89

02StangGToWNEr · May 27th, 2008, 05:33 PM

Good write-up bro. Someone gonna sticky this for all of us???

02StangGToWNEr · May 27th, 2008, 05:35 PM

Originally Posted by 07stanggt

good job can you email me this write up.

You should be able to just copy and paste it into your own E-mail, then send it to yourself, and save it.

silvergtstang99 · May 27th, 2008, 05:35 PM

Good stuff man

somebody that is thinking about doing this better rep him!

UNVMYGT · July 20th, 2008, 12:56 AM

Just so you can study up on the finer points, here is the instructions from the Ford manual.
Ford Service Manuals - IN-VEHICLE REPAIR

APER · August 1st, 2008, 08:16 PM

what do you do for the break in on the comp cams or any cam for that matter im getting the comp stage nsr IIs and was just wondering.

07 STROKER · August 1st, 2008, 08:20 PM

dont ask me...i was spraying them that night...i drove kind of nice for around 80 kilometers first but thats it

GOTTORQ · March 24th, 2009, 07:35 PM

awesome write up man, im looking at this now, because i plan on doing mine this weekend or next, u never said to reinstall the followers?? any reason why u left them out while putting the cam back in..or did i miss that part? EDIT: nvm saw that in part two, so u reinstall them after them cam is in? im so lost lol i want to completely understand this before i even attempt it

NastyFX4 · March 24th, 2009, 08:22 PM

Good stuff !!

Errick NDA · April 16th, 2010, 10:39 PM

Man thats some good write up ! Thanks for all the infromation !

navyman8903 · April 17th, 2010, 09:06 AM

why isn't this a sticky yet!

usafimj · April 17th, 2010, 11:13 AM

It kinda is. It's in a sticky thread

Jucostud · April 17th, 2010, 02:07 PM

2 years old ftw!

navyman8903 · April 18th, 2010, 12:26 PM

^ I didn't bring it up.......

May 26th, 2008, 05:44 PM	#21
2006greyGT Premium Member 2006 Satin Silver GT 11.08@125.22 Join Date: Aug 2007 Location: KC Posts: 3,073 iTrader: 0 reviews	OK... how do I get to page two... I knew I was stupid __________________ 2.6l KENNE BELL 298 Stroker, Ported heads Pro Motion Built 3650/McLeod RST/ MGW Short Throw Long tube/O/R X /Borla Touring 8 rib/65 lb injectors/GT500 twin fuel ET Drag Slicks/3.73 gear Detroit Truetrac /CDC AGR Spoiler

May 26th, 2008, 05:46 PM	#22
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	go to the how to sticky at the top of 05+ sectoin __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

May 26th, 2008, 06:37 PM	#25
tribaltek Hardcore Enthusiast Join Date: Feb 2008 Location: Detroit Posts: 2,508 iTrader: 1 reviews	So where would I get these tools, and how much do they cost? What are the part #'s of everything I would have to buy? This seems above my head, but if I can save $460, I might as well give it a go! __________________ '06 Whipple'd Mustang GT (Coming Soon) '02 Supercharged Harley-Davidson F-150 (Sold) '05 Mustang GT (Sold)

May 26th, 2008, 06:40 PM	#26
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	the wedge it tool # 303 1175 Spring compresser....shit hold on __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

May 26th, 2008, 06:40 PM	#27
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	303 1089 i believe...i gave to mustang89 __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

May 26th, 2008, 06:28 PM	#23
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,950 iTrader: 1 reviews	good job can you email me this write up.

May 26th, 2008, 06:34 PM	#24
bkid Regular 2006 Mustang GT 14.024 Join Date: May 2008 Location: ALBUQUERQUE Posts: 183 iTrader: 0 reviews	Thank you , I will be doing this soon . This is much better than the black and white pages I was looking at.It sounds as if patience is the key with the spring tool ,when replacing the followers.

May 27th, 2008, 05:33 PM	#28
02StangGToWNEr Hardcore Enthusiast 2006 Mustang GT Join Date: Feb 2007 Location: Upstate NY Posts: 2,698 iTrader: 0 reviews	Good write-up bro. Someone gonna sticky this for all of us???

July 20th, 2008, 12:56 AM	#31
UNVMYGT Regular 2008 Join Date: Jul 2008 Location: Lapeer Posts: 62 iTrader: 0 reviews	Just so you can study up on the finer points, here is the instructions from the Ford manual. Ford Service Manuals - IN-VEHICLE REPAIR __________________ 08 GT 5 Speed 3.55 MGW Shifter Shorty Antenna FRPP Stingers Next up... 4.10 gears After that... cams perhaps

August 1st, 2008, 08:16 PM	#32
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 218 iTrader: 0 reviews	break in what do you do for the break in on the comp cams or any cam for that matter im getting the comp stage nsr IIs and was just wondering. __________________ http://videos.streetfire.net/video/0...ust_143888.htm My mods: Comp NSR II's, JBA shorties, Pypes o/r H-pipe, Steeda axlebacks, Steeda UD, BBK TB, Steeda CAI, FRPP4.10, BMR panhard/LCA/Relo, Eibach springs, D-specs,Bama 91race, CMDP

August 1st, 2008, 08:20 PM	#33
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	dont ask me...i was spraying them that night...i drove kind of nice for around 80 kilometers first but thats it __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

March 24th, 2009, 07:35 PM	#34
GOTTORQ Enthusiast 2008 Mustang GT/CS BLK 13.7@ 103mph Join Date: Jan 2008 Location: Connecticut Posts: 600 iTrader: 0 reviews	awesome write up man, im looking at this now, because i plan on doing mine this weekend or next, u never said to reinstall the followers?? any reason why u left them out while putting the cam back in..or did i miss that part? EDIT: nvm saw that in part two, so u reinstall them after them cam is in? im so lost lol i want to completely understand this before i even attempt it __________________ Stage 2 Mutha Thumprs,FRPP 4.10s, Pypes O/R X pipe, Violator axleback, JLT CAI, GT500 spoiler, 18x9/18x10 (255/285) H&R lowering springs Nitrous is like a hot girl with an STD... you wanna hit it, but your afraid of the consequences Last edited by GOTTORQ; March 24th, 2009 at 07:50 PM.

March 24th, 2009, 08:22 PM	#35
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 16,008 iTrader: 9 reviews	Good stuff !! __________________

April 16th, 2010, 10:39 PM	#36
Errick NDA Newbie Join Date: Apr 2010 Posts: 3 iTrader: 0 reviews	Man thats some good write up ! Thanks for all the infromation !

April 17th, 2010, 11:13 AM	#38
usafimj I Post Entirely Way Too Much 2007 Ford Mustang GT 12.847 @ 114.12mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 5,084 iTrader: 1 reviews	It kinda is. It's in a sticky thread __________________ 07 GT-- Gone But Not Forgotten Military Crew E-5

April 17th, 2010, 02:07 PM	#39
Jucostud booooost'd 2007 Mustang Join Date: Nov 2006 Location: drink'n ur kool-aid Posts: 7,043 iTrader: 0 reviews	2 years old ftw! __________________ Jucostud's Official Build Thread 1988 LX HATCH 5.0 - FOR SALE $5,000 OBO 2007 vortech gt - SOLD! Looking for next project

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/2005-2010/72812-nsr-cam-write-up.html
Posted By	For	Type	Date
Comp Cams SPR Stage 2 Install.... - SouthFloridaStangs.net	This thread	Refback	April 18th, 2012 01:05 AM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source - Ford Mustang Forums	This thread	Refback	November 2nd, 2010 11:44 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source - Ford Mustang Forums	This thread	Refback	August 8th, 2010 08:22 PM
S197 Sites	This thread	Refback	April 28th, 2010 10:22 PM
FRPP hot rod cams and nitrous..? - WWW.S197FORUM.COM	This thread	Refback	March 9th, 2010 11:40 PM
Curious about cam shims - WWW.S197FORUM.COM	This thread	Refback	February 23rd, 2010 11:02 AM
Hot Rod cam dyno results - Page 4 - WWW.S197FORUM.COM	This thread	Refback	February 9th, 2010 06:08 PM
HELP: Cam Tools - WWW.S197FORUM.COM	This thread	Refback	December 16th, 2009 04:52 PM
HELP: Cam Tools - WWW.S197FORUM.COM	This thread	Refback	December 16th, 2009 04:41 PM
Curious about cam shims - WWW.S197FORUM.COM	This thread	Refback	November 10th, 2009 08:34 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source	This thread	Refback	September 9th, 2009 06:25 AM
Comp Cams SPR Stage 2 Install.... - SouthFloridaStangs.net	This thread	Refback	June 29th, 2009 07:15 PM
How hard - MustangForums.com	This thread	Refback	April 8th, 2009 01:47 AM
Cams & Headers for 4793 - Page 2 - IMBOC	This thread	Refback	March 31st, 2009 09:03 AM
How hard - MustangForums.com	This thread	Refback	September 21st, 2008 06:22 PM
My review of JDM: - Page 2 - WWW.S197FORUM.COM	This thread	Refback	August 12th, 2008 03:10 PM
My review of JDM: - Page 2 - WWW.S197FORUM.COM	This thread	Refback	August 12th, 2008 02:51 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source Forums	This thread	Refback	June 14th, 2008 03:42 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source Forums	This thread	Refback	June 12th, 2008 06:52 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source Forums	This thread	Refback	June 9th, 2008 09:00 AM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source Forums	This thread	Refback	June 8th, 2008 09:55 PM
FRPP Hot Rod Cams installed - Idle is now surging/bouncing - Any ideas? - Page 5 - The Mustang Source Forums	This thread	Refback	June 8th, 2008 09:15 PM

Threads Similar to: NSR cam write up.
Thread	Thread Starter	Forum	Replies	Last Post
Write Up...	JASonic	V6 Mustangs	6	April 8th, 2008 03:29 PM
Info on NSR cams	07stanggt	2005 - 2010	51	April 7th, 2008 03:26 PM
Video of idle with nsr cams	07stanggt	2005 - 2010	5	March 5th, 2008 04:48 PM
Brenspeed Com NSR Cams ?	killermach1	2005 - 2010	15	January 7th, 2008 12:59 AM

All times are GMT -4. The time now is 01:58 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.