short throw shifter

crazytaz · June 4th, 2008, 12:41 AM

has any one installed a ford racing short throw shifter on there car. and is it a good shifter or should i go with a hurst or mgw shifter

SKRAPR · June 4th, 2008, 12:43 AM

Mgw Ftw

KingCobra · June 4th, 2008, 12:51 AM

i have an mgw on mine and it works perfect

leebunnyz · June 4th, 2008, 12:54 AM

isnt the ford racing shifter the hurst? if not then i would go with the hurst or MGW.

Jucostud · June 4th, 2008, 12:55 AM

you should get the new hurst shifter.

JakeM · June 4th, 2008, 01:12 AM

Ford racing is the hurst shifter. I have a MGW as well and love it. I know a lot of ppl that love the hurst though too. Either way its a major step up from the factory shifter.

texas_mustang · June 4th, 2008, 01:55 AM

mgw ftmfw

DeMello · June 4th, 2008, 02:06 AM

havent even got it in the mial yet but im still gonna say it

TRI-AX FTW

petyweestraw · June 4th, 2008, 03:49 AM

I like the stock shifter look so mgw

partsbill · June 4th, 2008, 08:44 AM

I have the FRPP shifter which is a Hurst, very happy with price and performance.

DeMello · June 4th, 2008, 08:48 AM

i can use the same thing that covers the shifter and same handle as stock rite

07stanggt · June 4th, 2008, 09:42 AM

shifter in the middle is the FRPP/hurst, shifter on the bottom is the new Billet comp/plus hurst. The frpp/hurst is a 32% reduction in throw from stock and iw stamped sheet metal. The new hurst is billet aluminum, has a 40% reduction in throw, has fully adjustable stop bolts and a new spring system that helps with shifts, it also has new bushing for mounting.

I have the new hurst in stock if your interested.

Shifter up top is the pro 5.0 if you wondering.

libtec193 · June 4th, 2008, 09:43 AM

i love the look of the hurst...i was always into the MGW but i wish it kept the boot low and showed off a nice shaft instead of such a stock look...but i understand some people love that look...im torn

DeMello · June 4th, 2008, 09:45 AM

Originally Posted by 07stanggt

. The frpp/hurst is a 32% reduction in throw from stock and iw stamped sheet metal. The new hurst is billet aluminum, has a 40% reduction in throw,

wat are those numbers for the tri ax

libtec193 · June 4th, 2008, 09:47 AM

anyone got a video of this hurst in actions? i wanna see what thats like....maybe it will change my mind

07stanggt · June 4th, 2008, 09:48 AM

I beleive the tri ax is a higher then 40% reduction in throw maybe closer to 50%. I sell those too, im just not sure on the number.

07stanggt · June 4th, 2008, 09:49 AM

Originally Posted by libtec193

anyone got a video of this hurst in actions? i wanna see what thats like....maybe it will change my mind

change your mind to what, what are you comparing the MGW?

07stanggt · June 4th, 2008, 09:50 AM

yea i got a vid of the new hurst in action

Video of Best Run - Photobucket - Video and Image Hosting

libtec193 · June 4th, 2008, 09:51 AM

yeah

DeMello · June 4th, 2008, 09:52 AM

Originally Posted by 07stanggt

I beleive the tri ax is a higher then 40% reduction in throw maybe closer to 50%. I sell those too, im just not sure on the number.

i already bougth it...just wondering cuz i read someplace that steeda tri ax was the best and then on here everybody tlks about other shifters

so if steeda has closer to 50% shorter throw and the other one only has 40 how the F can the ohter one be better lol

June 4th, 2008, 12:41 AM	#1
crazytaz Regular Join Date: Jun 2007 Location: El Paso, Texas Posts: 63 iTrader: 0 reviews	short throw shifter has any one installed a ford racing short throw shifter on there car. and is it a good shifter or should i go with a hurst or mgw shifter

June 4th, 2008, 12:43 AM	#2
SKRAPR Regular 2005 Mustang GT Join Date: Oct 2007 Location: Charlotte, NC Posts: 277 iTrader: 0 reviews	Mgw Ftw __________________ Skrapr 2005 Mustang GT (5-spd Manual) FRPP 4.10's Kooks LT's \| Kooks Cat'd X C&L Racer CAI Dyno'd \| SCT-X3 MGW Shifter \| MGW Interior Details Comp XFI SPR Stage-II's

June 4th, 2008, 12:54 AM	#4
leebunnyz MM Fanatic Join Date: Feb 2007 Location: Vineland, NJ Posts: 3,583 iTrader: 0 reviews	isnt the ford racing shifter the hurst? if not then i would go with the hurst or MGW. __________________ Jesus Christ is #1 "The Founder Of Crews"

June 4th, 2008, 12:55 AM	#5
Jucostud booooost'd 2007 Mustang Join Date: Nov 2006 Location: drink'n ur kool-aid Posts: 6,985 iTrader: 0 reviews	you should get the new hurst shifter. __________________ Jucostud's Official Build Thread I'm selling everything off my car, if i have something u want, pm me. 1988 lx 5.0 - Daily 2007 vortech gt - for sale 2012 mustang 5.0 - December 2011

June 4th, 2008, 02:06 AM	#8
DeMello Banned Join Date: Apr 2008 Location: Florida Posts: 3,965 iTrader: 1 reviews	havent even got it in the mial yet but im still gonna say it TRI-AX FTW __________________ Just Another Bolt on GT [IMG]http://i45.tinypic.com/54f5ua.jpg[/IMG] Stock Longblock - 287/276 Low 12s NA! 10s on the spray?

June 4th, 2008, 12:51 AM	#3
KingCobra Newbie 1995 Cobra & 2003 GT Join Date: Jun 2008 Location: Hialeah Posts: 13 iTrader: 0 reviews	i have an mgw on mine and it works perfect

June 4th, 2008, 01:55 AM	#7
texas_mustang Banned Join Date: Dec 2006 Posts: 2,077 iTrader: 0 reviews	mgw ftmfw

June 4th, 2008, 03:49 AM	#9
petyweestraw Enthusiast 2006 Mustang gt Join Date: Jan 2008 Location: Dallas Texas Posts: 707 iTrader: 0 reviews	I like the stock shifter look so mgw

June 4th, 2008, 08:44 AM	#10
partsbill Regular Join Date: Nov 2007 Location: South Florida Posts: 132 iTrader: 0 reviews	I have the FRPP shifter which is a Hurst, very happy with price and performance. __________________ 06 Black GT 5sp/JLT II CAI/XCALSCT2/B a m a 93 Oct Race Tune/FRPP Stingers/Hurst Shifter/GT500 Spoiler//Steeda ultralite Springs & rear pan hard rod/Bullitt Strut tower brace/07 Gt manifold cover/Shelby Lip/Sequential HURST CREW MEMBER #17

June 4th, 2008, 08:48 AM	#11
DeMello Banned Join Date: Apr 2008 Location: Florida Posts: 3,965 iTrader: 1 reviews	i can use the same thing that covers the shifter and same handle as stock rite __________________ Just Another Bolt on GT [IMG]http://i45.tinypic.com/54f5ua.jpg[/IMG] Stock Longblock - 287/276 Low 12s NA! 10s on the spray?

June 4th, 2008, 09:42 AM	#12
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	shifter in the middle is the FRPP/hurst, shifter on the bottom is the new Billet comp/plus hurst. The frpp/hurst is a 32% reduction in throw from stock and iw stamped sheet metal. The new hurst is billet aluminum, has a 40% reduction in throw, has fully adjustable stop bolts and a new spring system that helps with shifts, it also has new bushing for mounting. I have the new hurst in stock if your interested. Shifter up top is the pro 5.0 if you wondering.

June 4th, 2008, 09:43 AM	#13
libtec193 Regular 2007 Mustang GT Join Date: Feb 2007 Location: norwood, NJ Posts: 145 iTrader: 1 reviews	i love the look of the hurst...i was always into the MGW but i wish it kept the boot low and showed off a nice shaft instead of such a stock look...but i understand some people love that look...im torn __________________ Saleen Super Shaker; sct 93 tune; frpp stingers; pypes off road X; Hurst Comp Plus ; FRPP springs; BMR panhard bar; Steeda LCA; BMR relocation brackets; rotorpros drill/ slotted; foose nitrous 20' wheels; nitto 555's; avic fb700

June 4th, 2008, 09:47 AM	#15
libtec193 Regular 2007 Mustang GT Join Date: Feb 2007 Location: norwood, NJ Posts: 145 iTrader: 1 reviews	anyone got a video of this hurst in actions? i wanna see what thats like....maybe it will change my mind __________________ Saleen Super Shaker; sct 93 tune; frpp stingers; pypes off road X; Hurst Comp Plus ; FRPP springs; BMR panhard bar; Steeda LCA; BMR relocation brackets; rotorpros drill/ slotted; foose nitrous 20' wheels; nitto 555's; avic fb700

June 4th, 2008, 09:48 AM	#16
07stanggt I Post Entirely Way Too Much 2007 GT Join Date: Mar 2007 Location: Ellicott City, MD Posts: 11,951 iTrader: 1 reviews	I beleive the tri ax is a higher then 40% reduction in throw maybe closer to 50%. I sell those too, im just not sure on the number.

June 4th, 2008, 09:51 AM	#19
libtec193 Regular 2007 Mustang GT Join Date: Feb 2007 Location: norwood, NJ Posts: 145 iTrader: 1 reviews	yeah __________________ Saleen Super Shaker; sct 93 tune; frpp stingers; pypes off road X; Hurst Comp Plus ; FRPP springs; BMR panhard bar; Steeda LCA; BMR relocation brackets; rotorpros drill/ slotted; foose nitrous 20' wheels; nitto 555's; avic fb700

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: short throw shifter
Thread	Thread Starter	Forum	Replies	Last Post
Short throw shifter	2006greyGT	2005 - 2010	9	January 24th, 2008 10:30 PM
Short Throw Shifter	soccerboy08	V6 Mustangs	1	November 16th, 2007 01:51 PM
any one know of this short throw shifter?	03Gtmustang	99-04	19	October 1st, 2007 12:07 PM
Short Throw Shifter	Keegan_Vann	99-04	21	January 7th, 2007 11:55 PM
Short Throw Shifter	mustangstud13	99-04	15	September 20th, 2006 07:51 PM

All times are GMT -4. The time now is 04:44 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.