Installed my new Power House D/S & Safety loop

bkid · June 21st, 2008, 05:32 PM

I installed my new Powerhouse and Che safety loop.Took about an hour and 1/2 .I also cleaned my Throttle body. Car woke up. No issues with the drive shaft and had it up to 120 not bad.

06RedfireGT · June 21st, 2008, 05:40 PM

Congrats

07 STROKER · June 21st, 2008, 06:20 PM

did you put in a adjustable upper control arm ?

bkid · June 21st, 2008, 06:54 PM

Originally Posted by 07 procharger

did you put in a adjustable upper control arm ?

No because I do not ever want to lower my car.I have a fixed Che UCA and LCA`S that I installed.

06VistaBlueGT · June 22nd, 2008, 08:56 AM

The reason 07 Procharger asked was because when you install a 1 piece DS your pinion angle is changed and needs to be adjusted. Without it being adjusted you may get premature wear on your u-joints. In a couple years I expect to be hearing on these websites how crappy the 1-piece DS's are because u-joints are failing on them when it could have been prevented by adjusting your pinion angle after installation.

bkid · June 22nd, 2008, 10:45 AM

I checked the pinion angle ,and I did not lower the car; so the Pinion angle is still good. I also had the dealer check it .I ran it at the track last night and got my best time yet of 14.084@5600 ft. alt.

kenneth · June 22nd, 2008, 12:00 PM

what kind of trap speed are you getting now.
Nice to see an improvement.

bkid · June 22nd, 2008, 02:21 PM

I am not sure on this,it says 96.763 .I was getting 98 something and had worse times this is weird.

June 21st, 2008, 05:32 PM	#1
bkid Regular 2006 Mustang GT 14.024 Join Date: May 2008 Location: ALBUQUERQUE Posts: 183 iTrader: 0 reviews	Installed my new Power House D/S & Safety loop I installed my new Powerhouse and Che safety loop.Took about an hour and 1/2 .I also cleaned my Throttle body. Car woke up. No issues with the drive shaft and had it up to 120 not bad.

June 21st, 2008, 05:40 PM	#2
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,484 iTrader: 2 reviews	Congrats __________________ ΜΟΛΩΝ ΛΑΒΕ

June 21st, 2008, 06:20 PM	#3
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,920 iTrader: 0 reviews	did you put in a adjustable upper control arm ? __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

June 22nd, 2008, 12:00 PM	#7
kenneth Hardcore Enthusiast 2006 Mustang GT 11.45@123.61 Join Date: Nov 2007 Location: Cut Off, LA. Posts: 1,468 iTrader: 2 reviews	what kind of trap speed are you getting now. Nice to see an improvement. __________________ Stock for now.

Threads Similar to: Installed my new Power House D/S & Safety loop
Thread	Thread Starter	Forum	Replies	Last Post
Driveshaft safety loop	shurb125	5.0 Mustangs	17	March 21st, 2008 08:48 PM
Modular Power House tunes	00silvergt	99-04	9	March 6th, 2008 08:20 PM
Drive shaft safety loop location	nolife	5.0 Mustangs	8	October 13th, 2007 09:17 PM
Hurst Short Throw and BMR Front Drive Shaft Safety Loop	Gunny	2005 - 2010	2	August 20th, 2007 11:26 AM
3 Point Seat Belt & General Safety	tnknepp	Classic Mustangs	3	July 17th, 2007 11:58 AM

June 22nd, 2008, 08:56 AM	#5
06VistaBlueGT Enthusiast 2006 Mustang GT 12.76@105 Join Date: Jan 2007 Location: Stark County, Ohio Posts: 878 iTrader: 0 reviews	The reason 07 Procharger asked was because when you install a 1 piece DS your pinion angle is changed and needs to be adjusted. Without it being adjusted you may get premature wear on your u-joints. In a couple years I expect to be hearing on these websites how crappy the 1-piece DS's are because u-joints are failing on them when it could have been prevented by adjusting your pinion angle after installation.

June 22nd, 2008, 10:45 AM	#6
bkid Regular 2006 Mustang GT 14.024 Join Date: May 2008 Location: ALBUQUERQUE Posts: 183 iTrader: 0 reviews	I checked the pinion angle ,and I did not lower the car; so the Pinion angle is still good. I also had the dealer check it .I ran it at the track last night and got my best time yet of 14.084@5600 ft. alt.

June 22nd, 2008, 02:21 PM	#8
bkid Regular 2006 Mustang GT 14.024 Join Date: May 2008 Location: ALBUQUERQUE Posts: 183 iTrader: 0 reviews	I am not sure on this,it says 96.763 .I was getting 98 something and had worse times this is weird.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 05:12 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.