Under hood insulation...

navyman8903 · November 2nd, 2009, 03:19 PM

Who has taken out the under hood insulation?

I did it on my last mustang with no problems, but the bullitt is not performance white.....should I do it?

Anthony05GT · November 2nd, 2009, 03:23 PM

You can. I did when I had the stock hood, but Ford doesn't complete the painting under the hood cotton in most cases, but not all. My car wasn't fully painted and my son's '05 pretty much is.

onederful100 · November 2nd, 2009, 03:42 PM

took mine out due to the whipple SC pulley clearance. no problems, except like Anthony05gt said, it isn't completely painted under the hood liner.
heres mine and a friends GT both with the hood liner taken out. if you look real close you can see where towards the middle mine is a little yellow. sorry the pic is from sort of far away.

vastang757 · November 2nd, 2009, 04:07 PM

I see no yellow

07 Boss · November 2nd, 2009, 04:32 PM

Pulled mine off a long time ago. Just be careful not to break any of the plastic fasteners. I got half of one rattling around between the layers of the hood and I can't seem to get it out. I never notice it until I raise my hood and then I can hear it rattling down to the cowl area.

navyman8903 · November 2nd, 2009, 04:42 PM

k.... Sold. doing it tomorrow.

2006YellowGT · November 2nd, 2009, 05:30 PM

I have had mine off for the last two years.[IMG]<a href="http://s953.photobucket.com/albums/ae15/2006YellowGT/?action=view&current=DSC00387_387_020.jpg" target="_blank"><img src="http://i953.photobucket.com/albums/ae15/2006YellowGT/DSC00387_387_020.jpg" border="0" alt="Photobucket"></a>[/IMG]

Anthony05GT · November 2nd, 2009, 05:45 PM

Originally Posted by vastang757

I see no yellow

Look in the center of the hood where the cut out area is. You can see the primer showing through.

stanglifemike · November 2nd, 2009, 05:55 PM

Try that pic again Yellow, I really want to see one in that color.

2006YellowGT · November 2nd, 2009, 07:17 PM

how i keep trying but it is not working

SoCalGT2005 · November 2nd, 2009, 07:57 PM

are there any downsides to taking the hood liner out? I imagine it serves some kind of purpose, anyone know why its there? ...I agree that it looks much better without it though.

Anthony05GT · November 2nd, 2009, 08:05 PM

Yes, it is mainly for sound deadening, but I'm sure it's got insulating purposes too. Not all cars have them, so take it off if you don't like it.

2006yellowgt that's not a stock hood.

stanglifemike · November 2nd, 2009, 08:34 PM

It is a fire retardent blanket. If your motor catches fire then the plastic push pins melt and allows the blanket to drop down over the motor smothering out the fire....in theory. It also serves as a little sound deadening as well.

Anthony05GT · November 2nd, 2009, 08:48 PM

Sounds reasonable.

SoCalGT2005 · November 2nd, 2009, 09:16 PM

sounds like a nice safety feature to have

RetroGT2006 · November 2nd, 2009, 09:46 PM

I thought the whole point of a hood liner was to keep the heat away from the hood so the paint doesn't bubble...? Is that true?

SoCalGT2005 · November 2nd, 2009, 09:58 PM

Originally Posted by RetroGT2006

I thought the whole point of a hood liner was to keep the heat away from the hood so the paint doesn't bubble...? Is that true?

yea, but only on your car.

1rnkpny · November 2nd, 2009, 10:48 PM

Originally Posted by stanglifemike

It is a fire retardent blanket. If your motor catches fire then the plastic push pins melt and allows the blanket to drop down over the motor smothering out the fire....in theory. It also serves as a little sound deadening as well.

Bingo! I was waiting for that reply.

Originally Posted by RetroGT2006

I thought the whole point of a hood liner was to keep the heat away from the hood so the paint doesn't bubble...? Is that true?

That's because your car is HAAAAAAAWWWWWWWT!!!!!!!!

NastyStang113 · November 2nd, 2009, 11:32 PM

It has no heat retention properties as far as insulation though. It's like Mike said, a fire retardant device.

navyman8903 · November 2nd, 2009, 11:45 PM

Aftermarket hoods don't have them though.

November 2nd, 2009, 03:19 PM	#1
navyman8903 All sissies going to Hell! 2008 BULLITT #3385 Join Date: Feb 2008 Location: maryland 20634, New york ithaca/ auburn/syracuse Posts: 3,303	Under hood insulation... Who has taken out the under hood insulation? I did it on my last mustang with no problems, but the bullitt is not performance white.....should I do it? __________________ HARDCORE CREW BULLITT CREW FOUNDER #01 Bassani Crew Member #5 Used meziere electric water pump $150.00 PM me.

November 2nd, 2009, 03:23 PM	#2
Anthony05GT Enthusiast Join Date: Feb 2009 Posts: 583	You can. I did when I had the stock hood, but Ford doesn't complete the painting under the hood cotton in most cases, but not all. My car wasn't fully painted and my son's '05 pretty much is. __________________ '05 GT, Whipple, JBA, Zoomers, Centerforce, Metco, J&M, JPC, MGW, FRPP, BBR stage 2 billet cams, McLeod, Diablosport, LFP, Autometer, CDC, tuned by Kevin MacDonald NEED A TIMING CHAIN WEDGE? PM ME

November 2nd, 2009, 03:42 PM	#3
onederful100 Enthusiast Join Date: Jun 2007 Location: Honolulu, HI Posts: 994	took mine out due to the whipple SC pulley clearance. no problems, except like Anthony05gt said, it isn't completely painted under the hood liner. heres mine and a friends GT both with the hood liner taken out. if you look real close you can see where towards the middle mine is a little yellow. sorry the pic is from sort of far away. __________________ 2007 GT 5sp 1992 LX 5.0 whipple crew member 2-Stang Crew My Car

November 2nd, 2009, 04:32 PM	#5
07 Boss Hardcore Enthusiast 2007 Mustang GT Join Date: Nov 2008 Location: Las Vegas Posts: 1,194	Pulled mine off a long time ago. Just be careful not to break any of the plastic fasteners. I got half of one rattling around between the layers of the hood and I can't seem to get it out. I never notice it until I raise my hood and then I can hear it rattling down to the cowl area. __________________ Roush CAI-Bama tune-Pacesetter L/T's and H-pipe-Flowmasters-4.10's-PH Driveshaft-Pro Kit-BMR LCA's w/brckts-BMR adj UCA & adj Panhard Ctr fogs-Generation II Facia-rear blackout w/seq tails-SHR flush mounts-Cervinis side scoops-Steeda Street Wing

November 2nd, 2009, 04:42 PM	#6
navyman8903 All sissies going to Hell! 2008 BULLITT #3385 Join Date: Feb 2008 Location: maryland 20634, New york ithaca/ auburn/syracuse Posts: 3,303	k.... Sold. doing it tomorrow. __________________ HARDCORE CREW BULLITT CREW FOUNDER #01 Bassani Crew Member #5 Used meziere electric water pump $150.00 PM me.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

November 2nd, 2009, 05:30 PM	#7
2006YellowGT Regular 2006 Mustang GT Join Date: May 2008 Location: Franklin NC Posts: 114	I have had mine off for the last two years.[IMG]<a href="http://s953.photobucket.com/albums/ae15/2006YellowGT/?action=view&current=DSC00387_387_020.jpg" target="_blank"><img src="http://i953.photobucket.com/albums/ae15/2006YellowGT/DSC00387_387_020.jpg" border="0" alt="Photobucket"></a>[/IMG] __________________ Don't hate Appreciate! Mods-Roush CAI, SLP Loudmouth II's, Bama Race Tune Being installed right now-Hellion 76mm Turbo Kit (and a new motor)

November 2nd, 2009, 05:55 PM	#9
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,279	Try that pic again Yellow, I really want to see one in that color. __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

November 2nd, 2009, 07:17 PM	#10
2006YellowGT Regular 2006 Mustang GT Join Date: May 2008 Location: Franklin NC Posts: 114	how i keep trying but it is not working Attached Thumbnails __________________ Don't hate Appreciate! Mods-Roush CAI, SLP Loudmouth II's, Bama Race Tune Being installed right now-Hellion 76mm Turbo Kit (and a new motor) Last edited by 2006YellowGT : November 2nd, 2009 at 07:20 PM.

November 2nd, 2009, 07:57 PM	#11
SoCalGT2005 Regular 2005 Mustang GT Join Date: Sep 2009 Location: Tempe, AZ (ASU) Posts: 76	are there any downsides to taking the hood liner out? I imagine it serves some kind of purpose, anyone know why its there? ...I agree that it looks much better without it though. __________________ 2005 Windveil GT >> ROUSH CAI, FRPP Stingers, Silverhorse Blackout Panel, Brushed "Aluminum" Dash Kit, chrome American Racing ROGUE wheels 20x8.5 with 255/35/20 Yokohama S.Drive tires, ROUSH rear springs

November 2nd, 2009, 08:05 PM	#12
Anthony05GT Enthusiast Join Date: Feb 2009 Posts: 583	Yes, it is mainly for sound deadening, but I'm sure it's got insulating purposes too. Not all cars have them, so take it off if you don't like it. 2006yellowgt that's not a stock hood. __________________ '05 GT, Whipple, JBA, Zoomers, Centerforce, Metco, J&M, JPC, MGW, FRPP, BBR stage 2 billet cams, McLeod, Diablosport, LFP, Autometer, CDC, tuned by Kevin MacDonald NEED A TIMING CHAIN WEDGE? PM ME

November 2nd, 2009, 08:34 PM	#13
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,279	It is a fire retardent blanket. If your motor catches fire then the plastic push pins melt and allows the blanket to drop down over the motor smothering out the fire....in theory. It also serves as a little sound deadening as well. __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

November 2nd, 2009, 08:48 PM	#14
Anthony05GT Enthusiast Join Date: Feb 2009 Posts: 583	Sounds reasonable. __________________ '05 GT, Whipple, JBA, Zoomers, Centerforce, Metco, J&M, JPC, MGW, FRPP, BBR stage 2 billet cams, McLeod, Diablosport, LFP, Autometer, CDC, tuned by Kevin MacDonald NEED A TIMING CHAIN WEDGE? PM ME

November 2nd, 2009, 09:16 PM	#15
SoCalGT2005 Regular 2005 Mustang GT Join Date: Sep 2009 Location: Tempe, AZ (ASU) Posts: 76	sounds like a nice safety feature to have __________________ 2005 Windveil GT >> ROUSH CAI, FRPP Stingers, Silverhorse Blackout Panel, Brushed "Aluminum" Dash Kit, chrome American Racing ROGUE wheels 20x8.5 with 255/35/20 Yokohama S.Drive tires, ROUSH rear springs

November 2nd, 2009, 09:46 PM	#16
RetroGT2006 Regular 2006 Mustang GT Join Date: Jan 2008 Location: Windermere,Florida Posts: 248	I thought the whole point of a hood liner was to keep the heat away from the hood so the paint doesn't bubble...? Is that true? __________________ 2006 Mustang GT. Slightly Modded =)! Im 21 yrs old. See my Ride.

November 2nd, 2009, 11:32 PM	#19
NastyStang113 MM Fanatic 2008 Mustang GT 11.87@119 Join Date: Jan 2009 Location: Florida Posts: 3,722	It has no heat retention properties as far as insulation though. It's like Mike said, a fire retardant device. __________________ VMP Tuning tuned Roush TVS - 524 rwhp 501 rwtq \| Under Construction \|

November 2nd, 2009, 11:45 PM	#20
navyman8903 All sissies going to Hell! 2008 BULLITT #3385 Join Date: Feb 2008 Location: maryland 20634, New york ithaca/ auburn/syracuse Posts: 3,303	Aftermarket hoods don't have them though. __________________ HARDCORE CREW BULLITT CREW FOUNDER #01 Bassani Crew Member #5 Used meziere electric water pump $150.00 PM me.

Threads Similar to: Under hood insulation...
Thread	Thread Starter	Forum	Replies	Last Post
Termi Hood Insulation.	Cricket	4V / SVT	20	May 29th, 2009 02:55 PM
How can I make a custom hood pad / insulation	jrfan4life	99-04	6	September 11th, 2008 02:03 PM
Hood insulation	jrfan4life	99-04	1	June 27th, 2007 07:20 PM
Hood Insulation	Garhfer	99-04	14	April 27th, 2007 09:16 AM
Hood Insulation	brad03svt	Modular Mustangs	5	March 21st, 2007 09:21 PM

All times are GMT -4. The time now is 11:38 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.