Vortech V3 Install

YoungMedic23 · November 8th, 2009, 12:16 AM

Originally Posted by stanglifemike

Nice Youngmedic!! I love the SRT-8 GC's!! What times are you running?

Went from low 13's to mid 11's....with 7psi

Once my Jeep returns from surgery....well let's just say 11's are old news

Redrocket06 · November 8th, 2009, 12:29 AM

I have seen your STR-8 on youtube, simply sick!

I run mid 12's now, I hope this will push me to high 11's. Also have my nitrous already installed (never spraid at the track, my times are all motor and the normal boltons) and next spring it will be dyno tunes so I can use it and see mid 11's.

YoungMedic23 · November 8th, 2009, 12:31 AM

Originally Posted by Redrocket06

I have seen your STR-8 on youtube, simply sick!

I run mid 12's now, I hope this will push me to high 11's. Also have my nitrous already installed (never spraid at the track, my times are all motor and the normal boltons) and next spring it will be dyno tunes so I can use it and see mid 11's.

EASY 11's after the blower!!!

I wouldn't do anymore than a 50 shot on the stock bottom end

Redrocket06 · November 8th, 2009, 07:33 AM

Originally Posted by YoungMedic23

EASY 11's after the blower!!!

I wouldn't do anymore than a 50 shot on the stock bottom end

That was what I was doing, I talked to PSI Motorsports (who I want to tune it) and he said 50-75 with the blower. I was going to get a 30 and 40 shot jets too(I have a 50 jet already) with at least 3 different fuel jets for each nitrous jet so it can be fine tuned. I know alot about N/A and N2O but havent done nitrous with FI. My kit is tuned for flywheel gains on NA (like most kits out there) and PSI said with FI and nitrous the gains will be at the wheels. My goal with N2O is 450-460 rwhp and hopefully 440ish rwtq.

stanglifemike · November 8th, 2009, 08:43 PM

You'll have 450 or more with just the Vortech HO
Edit: nevermind, remembered your not going HO

nem · November 9th, 2009, 09:41 AM

Originally Posted by Redrocket06

I have read the instructions 3X and the only thing that bugs me is draining the coolent. Don't like to F*** with coolent for some reason.

there is an easier way I just did with my Whipple install. Buy about 5 feet of 5/16" ID hose. Slide the hose in your shop vac and duct tape the connection. Attach the other end to the drain spigot and open the drain turn on the shop vac. Use the shop vac and remove all the coolant from the resovoir, then remove the top house from the resovoir, slide the 5/16" hose in the stock hose with the shop vac on. Your still gonna get some coolant spill on the floor but not much.

Redrocket06 · November 9th, 2009, 12:30 PM

Creative idea nem, but I think I will go with the plug on the radiator.

Man I just ordered a crank pulley installation bolt from Brenspeed, $33! I had to up the shipping to make sure I have it by Fri. Shipping was $25 on a dinky bolt. No mater, getting blown always cost money right.

nem · November 9th, 2009, 04:16 PM

Originally Posted by Redrocket06

Creative idea nem, but I think I will go with the plug on the radiator.

Thats what Im talking about. The connection to the radiator spigot is 5/16". If your referring to the white 19mm nut, that is the shutoff for the spigot.

Redrocket06 · November 9th, 2009, 07:08 PM

T-2 Days and counting

usnzt84 · November 10th, 2009, 07:52 PM

i know you are dieing to get it in, i had mine for almost 2 weeks before i installed it. drove me nuts

Redrocket06 · November 11th, 2009, 01:23 PM

It is like a 5 year old waiting for Christmas!

05roush0090 · November 11th, 2009, 02:29 PM

Originally Posted by stanglifemike

You'll have 450 or more with just the Vortech HO
Edit: nevermind, remembered your not going HO

I think the base brenspeed kit would net him 400-420rwhp depending on where he is at stock.

Redrocket06 · November 11th, 2009, 07:13 PM

I'm not too worried about the rwhp I will make as far as dyno stuff goes, I am very interested in what I will be able to do at the track. In excellent weather I run 12.6-12.5's and in hot muggy weather I am 12.8's. I would love to see a second cut out of my times. Should be doable with a said 100+ at the wheels. Oh, and I will have a set of underdrive pulleys and a JLT CAI up for sale soon. hint hint.

Me having fun last year:
Just a 12.71 on this run

12.71@107.65 video by Redrocket06 - Photobucket

And a 12.68

12.68@107.77 video by Redrocket06 - Photobucket

November 8th, 2009, 12:29 AM	#22
Redrocket06 Regular 2006 GT Coupe 12.562@108.74 1.819 60ft Join Date: Jun 2008 Location: Houston, TX Posts: 186	I have seen your STR-8 on youtube, simply sick! I run mid 12's now, I hope this will push me to high 11's. Also have my nitrous already installed (never spraid at the track, my times are all motor and the normal boltons) and next spring it will be dyno tunes so I can use it and see mid 11's. __________________ 2006 GT, 5 speed, 3.55, Vortech V3 Noncooled, Brenspeed 93 tune, OBX LT's O/R H-pipe, Delete Plates, LCA, Sway Bar Removed V3 installed Fri. the 13th Times and video to follow.

November 8th, 2009, 08:43 PM	#25
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,282	You'll have 450 or more with just the Vortech HO Edit: nevermind, remembered your not going HO __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

November 9th, 2009, 12:30 PM	#27
Redrocket06 Regular 2006 GT Coupe 12.562@108.74 1.819 60ft Join Date: Jun 2008 Location: Houston, TX Posts: 186	Creative idea nem, but I think I will go with the plug on the radiator. Man I just ordered a crank pulley installation bolt from Brenspeed, $33! I had to up the shipping to make sure I have it by Fri. Shipping was $25 on a dinky bolt. No mater, getting blown always cost money right. __________________ 2006 GT, 5 speed, 3.55, Vortech V3 Noncooled, Brenspeed 93 tune, OBX LT's O/R H-pipe, Delete Plates, LCA, Sway Bar Removed V3 installed Fri. the 13th Times and video to follow.

November 9th, 2009, 07:08 PM	#29
Redrocket06 Regular 2006 GT Coupe 12.562@108.74 1.819 60ft Join Date: Jun 2008 Location: Houston, TX Posts: 186	T-2 Days and counting __________________ 2006 GT, 5 speed, 3.55, Vortech V3 Noncooled, Brenspeed 93 tune, OBX LT's O/R H-pipe, Delete Plates, LCA, Sway Bar Removed V3 installed Fri. the 13th Times and video to follow. Last edited by Redrocket06 : November 11th, 2009 at 07:51 AM.

November 10th, 2009, 07:52 PM	#30
usnzt84 Regular 2008 Mustang GT Join Date: Apr 2008 Location: Virginia Posts: 134	i know you are dieing to get it in, i had mine for almost 2 weeks before i installed it. drove me nuts __________________ Vortech Supercharger,Hurst shifter, Diablo Sport Predator tune, Pypes O/R x-pipe, Super 44 Flowmasters,Hawk HPS Brake pads, Granitelli Slotted and Dimpled Rotors, Goodrich Steel braided brake lines, FRPP 3.73

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

November 11th, 2009, 01:23 PM	#31
Redrocket06 Regular 2006 GT Coupe 12.562@108.74 1.819 60ft Join Date: Jun 2008 Location: Houston, TX Posts: 186	It is like a 5 year old waiting for Christmas! __________________ 2006 GT, 5 speed, 3.55, Vortech V3 Noncooled, Brenspeed 93 tune, OBX LT's O/R H-pipe, Delete Plates, LCA, Sway Bar Removed V3 installed Fri. the 13th Times and video to follow.

Threads Similar to: Vortech V3 Install
Thread	Thread Starter	Forum	Replies	Last Post
Pics of my Vortech - Need help from you Vortech guys!!	stanglifemike	2005+	29	September 12th, 2009 11:52 PM
Vortech & Cams OR Vortech & After/Intercooler	StuTheMusicEngineer	99-04	21	January 4th, 2009 11:51 PM
Project Procrastination (vortech v1 s/c install)	gooberhead320	Power Adders	104	September 9th, 2008 09:07 AM
vortech install	johnr2001	99-04	7	January 6th, 2008 08:21 PM
vortech v1	mmvi	V6 Mustangs	36	October 28th, 2007 12:10 PM

All times are GMT -4. The time now is 02:32 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.