Technical Service Bulletins (TSB's)

mdvaldosta · March 19th, 2007, 10:39 AM

Here you'll find some of the technical service bulletins posted for late model Mustangs, posted by our resident Ford tech Casper...

2007 Ford Mustang TSB's
2006 Ford Mustang TSB's
2005 Ford Mustang TSB's

TheUNZippee! · March 19th, 2007, 10:43 AM

Gr8 idea. Thanks Joe.

wicked paint · July 2nd, 2007, 03:21 PM

thanks

Mrdestboi · July 19th, 2007, 03:46 PM

maybe you should explain what TSB's are for those that dont know...

Luis_GT · July 19th, 2007, 05:15 PM

Technical Service bulletins - basically small problems ford is aware off and informs there dealers and service staff, but aren't quite recalls since not all mustang suffer from them. See, Zippee had the clutch pack problem, but I don't, so mine doesn't need that TSB.

Jucostud · September 23rd, 2007, 03:54 AM

anybody ever heard of the Need More Power TSB? I think my car has it... I should take it into the dealership and see what they can do about it!

slrvstang2007 · October 6th, 2007, 12:21 AM

hahaha yeah I feel the same way, but f*** the dealership, they told me to leave it stock, thats when I got up and left.

matt · November 27th, 2007, 11:46 PM

Ben @ WMS · December 8th, 2007, 06:13 AM

well guys about the dealership issue, you talked, we listened. My name is Ben and i work at Wynne Ford, well about 2 months ago i finally talked my Dealerships owner into letting me and two other techs, modify a brand new mustang to sell, with a warranty and all. We did it and the dealership held a mustang show, which it sold at in 30 min. Since then they have opened a new department called Wynne Motorsports, where we just finished an 2008 Mustang GT Brenspeed Turbo Kit running 7psi with a limited warranty. Lets just say she will definitly move. I am a good friend of ChrisJ and a fellow performance enthusiast. Some of you might have seen the post for the turbo car in the classifieds section, when we first started building it. Just wanted to let you guys know that if your on the east coast looking for a reliable tuning shop for your mustang or other vehicle, we are the answer. I know this probably sounds like a sales pitch, but guys i am soo excited, cause i finally get to do my dream job for a living. Modifying cars is the whole reason i started work as a tech in the first place.

lol We are located at

1020 W. Mercury Blvd
Hampton, Va 23666
(757)838-0222
blee@wynneford.com

Right Now we are working on our next project which is an Grabber Orange 2008 GT which we are installing

4.10 Gear
Tubular Control Arms
Nitto 555 275/40R17
1.5" Lowering Springs
Ford Racing 5" Tach/Shift Light
Hurst Short Throw Shifter
JLT Cold Air w/ Tuner
DuckTail Spoiler
Steeda UnderDrive Pulleys

call for financing and warranty details ask for Pat Fields (sales manager)

bilkel · December 10th, 2007, 11:56 PM

Man that sounds good. I have Nitto 555 285/40/18 on the back and 255/40/18 on the front with a set of deep dish chrome Top Line rims. I think that would look great on your car, especially that grabber orange.

bilkel · December 10th, 2007, 11:58 PM

Here's some pics of the tires if you're interested.

06RedfireGT · December 11th, 2007, 12:03 AM

Ben I think that you should but Autometer guages in an SOS a-pillar pod instead of the monster tach, which IMO looks like shit, unless it is a stictly drag car.

06RedfireGT · December 11th, 2007, 12:04 AM

And good lookin car bilkel

Ben @ WMS · December 11th, 2007, 06:17 AM

i'll send pics of the tach installed, cause at first i agreed with the 5" tach looking like shit, i have a 2 1/16" in my personal car. But after installing it, I thought it looked kinda cool. Plus with the pierce package we are trying to build a good platform for the customer to work with, so who knows, the guy who buys it may just go and make it a full on drag car. lol In the turbo car we used an a-pillar setup. looks good too. But i'll post pics when I get it wired in and let ya tell me what ya think then, I appreciate the opinions cause without feedback, we will never know if we are building what people want. Thanks

Ben

torx head · February 17th, 2008, 12:46 AM

Where can I get the full TSB?

Mustang Marty · March 9th, 2008, 03:34 PM

is there a way to open and print the entire TSB? thanks, Marty

March 19th, 2007, 10:39 AM	#1
mdvaldosta Maintenance Man 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,928	Technical Service Bulletins (TSB's) Here you'll find some of the technical service bulletins posted for late model Mustangs, posted by our resident Ford tech Casper... 2007 Ford Mustang TSB's 2006 Ford Mustang TSB's 2005 Ford Mustang TSB's

July 19th, 2007, 03:46 PM	#4
Mrdestboi Regular 2006 Mustang GT Join Date: Mar 2007 Location: Gardena, Ca Posts: 498	maybe you should explain what TSB's are for those that dont know... __________________ Vroom <~~~ Stock Vr0oOm <~~~~ me 2006 silver/Black, red interior, moon roof, shaker 1000 JLT Cai, Steeda TB spacer, Hurst Short Throw Shifter, Pypes O/R H, MangaFlow AxelBack, Diablo Pedator...

September 23rd, 2007, 03:54 AM	#6
Jucostud Hardcore Enthusiast 2007 Mustang Join Date: Nov 2006 Location: North of Dallas, TX Posts: 2,427	anybody ever heard of the Need More Power TSB? I think my car has it... I should take it into the dealership and see what they can do about it! __________________ sct xcal 3, jlt cai, Steeda Pullies, Pypes o/r h pipe, Pypes Mid-Muffler Catback, American Racing Rogues, Nitto NT555, hurst shifter, eibach sportlines, bmr lca relo brackets & panhard bar. www.radmustangs.com -check em out! Texas Mustang Club

December 10th, 2007, 11:56 PM	#10
bilkel Newbie Join Date: Jul 2006 Posts: 15	Man that sounds good. I have Nitto 555 285/40/18 on the back and 255/40/18 on the front with a set of deep dish chrome Top Line rims. I think that would look great on your car, especially that grabber orange. __________________ 2005 Mustang GT

December 10th, 2007, 11:58 PM	#11
bilkel Newbie Join Date: Jul 2006 Posts: 15	Here's some pics of the tires if you're interested. Attached Thumbnails __________________ 2005 Mustang GT

July 2nd, 2007, 03:21 PM	#3
wicked paint Newbie Join Date: Jul 2007 Posts: 32	thanks

October 6th, 2007, 12:21 AM	#7
slrvstang2007 Regular Join Date: Oct 2007 Posts: 65	hahaha yeah I feel the same way, but f*** the dealership, they told me to leave it stock, thats when I got up and left.

November 27th, 2007, 11:46 PM	#8
matt Banned Join Date: Aug 2007 Posts: 4

December 8th, 2007, 06:13 AM	#9
Ben @ WMS Newbie 2005 Dodge SRT-4 13.1@106mph Join Date: Nov 2007 Location: Virginia Posts: 14	well guys about the dealership issue, you talked, we listened. My name is Ben and i work at Wynne Ford, well about 2 months ago i finally talked my Dealerships owner into letting me and two other techs, modify a brand new mustang to sell, with a warranty and all. We did it and the dealership held a mustang show, which it sold at in 30 min. Since then they have opened a new department called Wynne Motorsports, where we just finished an 2008 Mustang GT Brenspeed Turbo Kit running 7psi with a limited warranty. Lets just say she will definitly move. I am a good friend of ChrisJ and a fellow performance enthusiast. Some of you might have seen the post for the turbo car in the classifieds section, when we first started building it. Just wanted to let you guys know that if your on the east coast looking for a reliable tuning shop for your mustang or other vehicle, we are the answer. I know this probably sounds like a sales pitch, but guys i am soo excited, cause i finally get to do my dream job for a living. Modifying cars is the whole reason i started work as a tech in the first place. lol We are located at 1020 W. Mercury Blvd Hampton, Va 23666 (757)838-0222 blee@wynneford.com Right Now we are working on our next project which is an Grabber Orange 2008 GT which we are installing 4.10 Gear Tubular Control Arms Nitto 555 275/40R17 1.5" Lowering Springs Ford Racing 5" Tach/Shift Light Hurst Short Throw Shifter JLT Cold Air w/ Tuner DuckTail Spoiler Steeda UnderDrive Pulleys call for financing and warranty details ask for Pat Fields (sales manager)

December 11th, 2007, 06:17 AM	#14
Ben @ WMS Newbie 2005 Dodge SRT-4 13.1@106mph Join Date: Nov 2007 Location: Virginia Posts: 14	i'll send pics of the tach installed, cause at first i agreed with the 5" tach looking like shit, i have a 2 1/16" in my personal car. But after installing it, I thought it looked kinda cool. Plus with the pierce package we are trying to build a good platform for the customer to work with, so who knows, the guy who buys it may just go and make it a full on drag car. lol In the turbo car we used an a-pillar setup. looks good too. But i'll post pics when I get it wired in and let ya tell me what ya think then, I appreciate the opinions cause without feedback, we will never know if we are building what people want. Thanks Ben

February 17th, 2008, 12:46 AM	#15
torx head Newbie Join Date: Feb 2008 Posts: 5	Where can I get the full TSB?

March 9th, 2008, 03:34 PM	#16
Mustang Marty Newbie Join Date: Mar 2008 Posts: 6	TSB is there a way to open and print the entire TSB? thanks, Marty

Threads Similar to: Technical Service Bulletins (TSB's)
Thread	Thread Starter	Forum	Replies	Last Post
Universal Technical Institute anyone?	94v6blkndred	The Clubhouse	56	April 8th, 2008 11:36 AM
luis gt... or anyone technical	tsp_2177	The Clubhouse	17	September 24th, 2007 07:59 PM
5.0 technical question, I Know someone knows the answer!	crowbar73	5.0 Mustangs	7	August 1st, 2007 10:25 AM
Was reading through the TSB's....	DrHolliday	99-04	2	March 31st, 2007 08:18 AM

All times are GMT -4. The time now is 05:35 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.