Roush up grade

McMillin · March 20th, 2007, 03:48 PM

I talked to my dealership today and they told me that the roush reps were there and there is a new pully coming for the s/c. He also told me it was going to add 30hp hopfully at the wheels? And still maintian the warrenty.
He made me think that we didn't have to send the computer to roush. So I am on the list. JM

MaverickMLFD371 · March 20th, 2007, 03:56 PM

hmmm i'm suprised that you dont have to retune the car for that power, especially since H.O. kits come with different injectors on practially all S/C kits. so a retune is a must

might want to double check his info. he's a dealer, so he wouldn't quite have all that information since the kits not out. give Roush a call for all that information. direct from the company is always better than going through a dealer

McMillin · March 20th, 2007, 04:10 PM

I was thinking the same thing, It sounded to simple on the phone, when they get the parts they will call me.....Then we will find out for sure..later......JM

mrbill4 · March 21st, 2007, 07:14 AM

The folks at New Holland Ford in Lancaster Pa are in the process of installing a Roush M90 SC on my new 07 GT and they told me they have to send it back to Roush so I believe you were misinformed about not having to send it in. However, they were correct about saving the warranty when installed by an authorized dealership. Bill

MaverickMLFD371 · March 21st, 2007, 09:27 AM

plus the air intake aseembly that the will give you will also need to be retuned for the MAF size as well.

GTNorm · March 21st, 2007, 10:16 AM

It might be possible that they are allowing the dealer to input the tune upgrade since the brain was already sent to them on the original installation. I gotta check with my dealer too, sounds like they are getting close. Did your dealer indicate any price ?

mrbill4 · March 21st, 2007, 12:12 PM

I already paid them. The total cost to me was $6,850 that included the SC, intercooler etc, supplemental kit needed for an 07, installation and 6% Pa tax. I just called New Holland and they said their waiting for it to come back from Roush

GTNorm · March 21st, 2007, 07:17 PM

I paid 5700 for my roushcharger installed so that means the kit must be around a grand. I know a pully can be had for 150 so is that good for the rest of it?

MaverickMLFD371 · March 22nd, 2007, 07:23 AM

put it this way, your paying a grand for more power, but keeping your warranty! if thats what it costs to keep your warranty than it worth it.

mrbill4 · March 22nd, 2007, 07:38 AM

That was a great price. What I paid was well within my budget so I'm fairly happy with it. Please keep in mind that was including the tax. They just called and told me I can pick it up, so even at 61 I'm excited about getting it back. They also installed a roush short throw shifter.

GTNorm · March 22nd, 2007, 10:21 AM

William don't feel too old a lot of us are right there with you. I'm 55 myself. We were the original muscle car generation so it's only natural for us to want another one.

McMillin · March 22nd, 2007, 11:20 PM

I am right behind ya norm Im 49, my frist car was a 68 charger R/T with the 440 mag. JM

GTNorm · March 22nd, 2007, 11:44 PM

Mcmillin...those were the days...I got to drive my friends 69 charger RT 440manum 4 speed alot of times ...talk about a long throw shifter Thant thing must have been 2 ft tall lol . William what part of Pa? I was born in Pa and lived there till I was 30 then headed to Florida.

mrbill4 · March 23rd, 2007, 06:34 AM

Thanks for all the support on the age. I had a 69 Mock 1 and like the fool I am went to a (get this) VW during the gas crisis and was sorry ever since. This time I'm never getting rid of this one. I live in Lebanon, outside Harrisburg. Originally from Scranton. By the way, I got it back and I'm very happy. My new pipes (borla) sound twice as good. May not be the fastest, but it certainly isn't the slowest. Even got some props from two guys driving vets yesterday. Bill

McMillin · April 1st, 2007, 09:04 AM

The Roush dealer called yesterday and said the new pullys are in so tomorrow I'm making my apiontment. I will let you know how it turns out
and how much $.......JM

GTNorm · April 1st, 2007, 11:00 AM

William I know where Lebanon is ...i used to race motocross in that area . The Sleepy Hollow motox park was there. I also drove both of my Mach1's thru there going rte 22 from pittsburgh area to Philly several times. Ever race one of those Amish buggies ? lol

Grabber427 · April 1st, 2007, 09:33 PM

The new 73mm pulley is on the Roush web page now. It adds 15hp and costs $398. You can install it yourself and they send you a FedX box to send the ecm back to them to get recallibrated. They claim they get it back to you overnight. I'll find out soon enough. Here's the link to the Roush page:

http://store.roushperformance.com/detail.aspx?ID=997

March 20th, 2007, 03:48 PM	#1
McMillin Regular Join Date: Jan 2007 Location: oregon Posts: 96	Roush up grade I talked to my dealership today and they told me that the roush reps were there and there is a new pully coming for the s/c. He also told me it was going to add 30hp hopfully at the wheels? And still maintian the warrenty. He made me think that we didn't have to send the computer to roush. So I am on the list. JM

March 21st, 2007, 10:16 AM	#6
GTNorm Regular Join Date: Jun 2006 Posts: 490	It might be possible that they are allowing the dealer to input the tune upgrade since the brain was already sent to them on the original installation. I gotta check with my dealer too, sounds like they are getting close. Did your dealer indicate any price ? __________________ A man with experience is never at the mercy of a man with a theory.

March 21st, 2007, 12:12 PM	#7
mrbill4 Newbie Join Date: Mar 2007 Posts: 29	I already paid them. The total cost to me was $6,850 that included the SC, intercooler etc, supplemental kit needed for an 07, installation and 6% Pa tax. I just called New Holland and they said their waiting for it to come back from Roush __________________ Roush SC/power pulley, 39lb inj, Steeda CAI, GT500 dual fuel pump, X Cal 2, Dynatech LT headers cated X, Borla axle-back, Roush short throw shifter & Strut Tower Brace, FRPP anti-roll bars, GT500 rear lower control arms, adj pan hard, 406rwhp/403rwtq

March 21st, 2007, 07:17 PM	#8
GTNorm Regular Join Date: Jun 2006 Posts: 490	I paid 5700 for my roushcharger installed so that means the kit must be around a grand. I know a pully can be had for 150 so is that good for the rest of it? __________________ A man with experience is never at the mercy of a man with a theory.

March 22nd, 2007, 10:21 AM	#11
GTNorm Regular Join Date: Jun 2006 Posts: 490	William don't feel too old a lot of us are right there with you. I'm 55 myself. We were the original muscle car generation so it's only natural for us to want another one. __________________ A man with experience is never at the mercy of a man with a theory.

March 20th, 2007, 03:56 PM	#2
MaverickMLFD371 Hardcore Enthusiast 2005 12.3 @ 115 Join Date: Dec 2005 Location: Southampton, NJ Posts: 1,287	hmmm i'm suprised that you dont have to retune the car for that power, especially since H.O. kits come with different injectors on practially all S/C kits. so a retune is a must might want to double check his info. he's a dealer, so he wouldn't quite have all that information since the kits not out. give Roush a call for all that information. direct from the company is always better than going through a dealer

March 20th, 2007, 04:10 PM	#3
McMillin Regular Join Date: Jan 2007 Location: oregon Posts: 96	I was thinking the same thing, It sounded to simple on the phone, when they get the parts they will call me.....Then we will find out for sure..later......JM

March 21st, 2007, 07:14 AM	#4
mrbill4 Newbie Join Date: Mar 2007 Posts: 29	The folks at New Holland Ford in Lancaster Pa are in the process of installing a Roush M90 SC on my new 07 GT and they told me they have to send it back to Roush so I believe you were misinformed about not having to send it in. However, they were correct about saving the warranty when installed by an authorized dealership. Bill

March 21st, 2007, 09:27 AM	#5
MaverickMLFD371 Hardcore Enthusiast 2005 12.3 @ 115 Join Date: Dec 2005 Location: Southampton, NJ Posts: 1,287	plus the air intake aseembly that the will give you will also need to be retuned for the MAF size as well.

March 22nd, 2007, 07:23 AM	#9
MaverickMLFD371 Hardcore Enthusiast 2005 12.3 @ 115 Join Date: Dec 2005 Location: Southampton, NJ Posts: 1,287	put it this way, your paying a grand for more power, but keeping your warranty! if thats what it costs to keep your warranty than it worth it.

March 22nd, 2007, 07:38 AM	#10
mrbill4 Newbie Join Date: Mar 2007 Posts: 29	That was a great price. What I paid was well within my budget so I'm fairly happy with it. Please keep in mind that was including the tax. They just called and told me I can pick it up, so even at 61 I'm excited about getting it back. They also installed a roush short throw shifter.

March 22nd, 2007, 11:20 PM	#12
McMillin Regular Join Date: Jan 2007 Location: oregon Posts: 96	I am right behind ya norm Im 49, my frist car was a 68 charger R/T with the 440 mag. JM

March 22nd, 2007, 11:44 PM	#13
GTNorm Regular Join Date: Jun 2006 Posts: 490	Mcmillin...those were the days...I got to drive my friends 69 charger RT 440manum 4 speed alot of times ...talk about a long throw shifter Thant thing must have been 2 ft tall lol . William what part of Pa? I was born in Pa and lived there till I was 30 then headed to Florida. __________________ A man with experience is never at the mercy of a man with a theory.

March 23rd, 2007, 06:34 AM	#14
mrbill4 Newbie Join Date: Mar 2007 Posts: 29	Thanks for all the support on the age. I had a 69 Mock 1 and like the fool I am went to a (get this) VW during the gas crisis and was sorry ever since. This time I'm never getting rid of this one. I live in Lebanon, outside Harrisburg. Originally from Scranton. By the way, I got it back and I'm very happy. My new pipes (borla) sound twice as good. May not be the fastest, but it certainly isn't the slowest. Even got some props from two guys driving vets yesterday. Bill

April 1st, 2007, 09:04 AM	#15
McMillin Regular Join Date: Jan 2007 Location: oregon Posts: 96	The Roush dealer called yesterday and said the new pullys are in so tomorrow I'm making my apiontment. I will let you know how it turns out and how much $.......JM

Threads Similar to: Roush up grade
Thread	Thread Starter	Forum	Replies	Last Post
R.I.P ...Roush	GTNorm	2005+	40	October 29th, 2007 08:08 AM
100 To 1 Roush	oldernewbie	The Clubhouse	2	October 27th, 2007 04:10 PM
roush 427!!!!!!!	slightly stoopid	96-98	4	June 7th, 2007 01:36 AM
Roush!	mustang1147	Modular Mustangs	7	January 3rd, 2007 04:22 PM
Roush	JRubin2000	99-04	0	October 11th, 2006 10:27 AM

All times are GMT -4. The time now is 10:32 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

April 1st, 2007, 11:00 AM	#16
GTNorm Regular Join Date: Jun 2006 Posts: 490	William I know where Lebanon is ...i used to race motocross in that area . The Sleepy Hollow motox park was there. I also drove both of my Mach1's thru there going rte 22 from pittsburgh area to Philly several times. Ever race one of those Amish buggies ? lol __________________ A man with experience is never at the mercy of a man with a theory.

April 1st, 2007, 09:33 PM	#17
Grabber427 Regular 2007 Roush 427R Join Date: Jan 2007 Location: Vestal, New York Posts: 105	The new 73mm pulley is on the Roush web page now. It adds 15hp and costs $398. You can install it yourself and they send you a FedX box to send the ecm back to them to get recallibrated. They claim they get it back to you overnight. I'll find out soon enough. Here's the link to the Roush page: http://store.roushperformance.com/detail.aspx?ID=997