Turbo is done, got a question for you turbo guru's

Regency 2007 · June 22nd, 2007, 09:05 PM

Well, the car is dead now! had to get the wrecker to take it to the tuner this afternoon. Car all the sudden threw code for cam phaser, all 8 injectors, and EVAP, and then the typica systems check code. I also told him to fix the back wash and he said we are going to have to add to the pipeing on the intake to make coil around back towards the back of the motor... it's all a mess

Emay · June 22nd, 2007, 10:26 PM

Regency,

I saw a post elsewhere, I'd really have to dig as it's been a month since I read. Was on like chicagosvt or chicagolandmustang. Just drawing a blank on which site it could have been.

Anyway, a guy did a single turbo install, not positive what manufacturer, but had the same codes throw. When I first read the thread it was already like 3 or 4 months old, and all their attempted remedies resulted in all or some of the same codes. I know he was extremely frustrated about backwash, but in their attempt to fix the backwash, they still threw evap codes, at which point the car went to limp mode and then a no start condition almost immediately after. Sounds like you got similar issues.

I'll do some digging, see if I can find it, so at the least you can have a sort of do's and doent's list. Maybe he came to a resolution and you and the tuner can save yourself some time..

Also, I see your postin on modular, try there as well. Numerous turbo guys over there..

jjuddz · June 23rd, 2007, 12:31 AM

Man Regency, I would say it, but I hate to beat a man while he's down...

TheUNZippee! · June 23rd, 2007, 12:51 AM

That sucks bro. Best of luck getting your ride taken care of man.

Regency 2007 · June 23rd, 2007, 02:37 AM

I was really hopeing my car would be nice and dependable but after today I have kinda lost the faith... I'm gonna give my tuner is good chance at it and if I continue to have trouble with it... I'm going back to N/A or another poweradder (already have KB boost a pump, injectors, plugs, tuner, ect. installed)

There is nothing wrong with my tune or the install, there has to be a problem somewhere in the kit or computer system. If Hellion says there should be no backwash, then I may just have him send me another intake tube/BPV to see if that could be it, forgot to ask tuner if a better BPV would help...

ChrisJ · June 23rd, 2007, 03:12 PM

Bro are you running the hellion tune or did your tuner put in his own?

the piping seems to be hellions fault but the codes would be your tuners if he tuned it...

Regency 2007 · June 23rd, 2007, 04:14 PM

I got my bets on it is Hellion's fault because the tune is dead on and very conservative...

My main concern right now is the cam phasor code it threw... hopefully it is something as simple as just the sensor and not the actual cam gear?

Chris, what would I need to do to get rid of the backwash if I dont modify my intake tube, whatever I spend money on to get rid of it, I want to make sure it completly gets rid of it after the first change I make to it... Dont wanna purchase something and then have to buy something else as well to make sure it is gone

ChrisJ · June 23rd, 2007, 06:34 PM

Well this sounds like atune issue and if you are not running hellions tune then it cant be hellions fault for the cars codes...

The back wash issue can be remedied by someone fixing the intake piping...You can still use the parts you have you just need to have the BPV tube changed alittle to keep from getting backwash...

Or you could have you tuner change it to a blow-thru design and then you dont ahve to worry about backwashing you MAF...It would require you to ahve some work done and the tune tweaked but it would also allow you to vent to the atmosphere...

Regency 2007 · June 23rd, 2007, 06:47 PM

ok, I will mention all this to my tuner...

Regency 2007 · June 25th, 2007, 09:12 PM

well tuner found the pipe going down from the turbo had poped off and that was causing all the stalling and weird stuff like the injector codes and evap's. Goes back on the dyno tomarrow to make sure everything is alright and he believes he can get rid of the backwash with a little change in tune

catchtheroadrunner · June 25th, 2007, 11:36 PM

Nice thread...It scared the turbo out of me. I hope it works out for you.

Since we're on the subject...Out of 100, how many FI cars would you guys expect to need signficant up front tweaking for any reason (tuner error, install error)?

catchtheroadrunner · June 25th, 2007, 11:36 PM

Nice thread...It scared the turbo out of me. I hope it works out for you.

Since we're on the subject...Out of 100, how many FI cars would you guys expect to need signficant up front tweaking for any reason (tuner error, install error)?

stanglifemike · June 25th, 2007, 11:43 PM

Glad your getting it resolved, keep us updated man.

ChrisJ · June 26th, 2007, 09:46 AM

Figured it was tuner issues...

Tell him to roll your piping so it wont happen again...

June 22nd, 2007, 10:26 PM	#22
Emay May 08 ROTM 2007 Mustang GT Join Date: Oct 2006 Location: Look over your shoulder Posts: 2,230	Regency, I saw a post elsewhere, I'd really have to dig as it's been a month since I read. Was on like chicagosvt or chicagolandmustang. Just drawing a blank on which site it could have been. Anyway, a guy did a single turbo install, not positive what manufacturer, but had the same codes throw. When I first read the thread it was already like 3 or 4 months old, and all their attempted remedies resulted in all or some of the same codes. I know he was extremely frustrated about backwash, but in their attempt to fix the backwash, they still threw evap codes, at which point the car went to limp mode and then a no start condition almost immediately after. Sounds like you got similar issues. I'll do some digging, see if I can find it, so at the least you can have a sort of do's and doent's list. Maybe he came to a resolution and you and the tuner can save yourself some time.. Also, I see your postin on modular, try there as well. Numerous turbo guys over there.. __________________ View and purchase my pics: http://erinmayphotography.exposuremanager.com/g/ Eleanor Desktop - http://erinmayphotography.exposurema...ormoonposter13

June 23rd, 2007, 12:31 AM	#23
jjuddz Regular Join Date: Feb 2007 Location: Oklahoma Posts: 92	Man Regency, I would say it, but I hate to beat a man while he's down... __________________ 06 GT AUTO STREET SCENE KIT PYPES O/R H BORLA STINGERS JLT2 CAI SCT TUNER

June 23rd, 2007, 03:12 PM	#26
ChrisJ MuchCoolerThanGTsetGO 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 16,389	Bro are you running the hellion tune or did your tuner put in his own? the piping seems to be hellions fault but the codes would be your tuners if he tuned it... __________________ My Junk www.myspace.com/cjobe

June 23rd, 2007, 06:34 PM	#28
ChrisJ MuchCoolerThanGTsetGO 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 16,389	Well this sounds like atune issue and if you are not running hellions tune then it cant be hellions fault for the cars codes... The back wash issue can be remedied by someone fixing the intake piping...You can still use the parts you have you just need to have the BPV tube changed alittle to keep from getting backwash... Or you could have you tuner change it to a blow-thru design and then you dont ahve to worry about backwashing you MAF...It would require you to ahve some work done and the tune tweaked but it would also allow you to vent to the atmosphere... __________________ My Junk www.myspace.com/cjobe

June 25th, 2007, 11:36 PM	#31
catchtheroadrunner Enthusiast Join Date: Jan 2007 Posts: 655	Nice thread...It scared the turbo out of me. I hope it works out for you. Since we're on the subject...Out of 100, how many FI cars would you guys expect to need signficant up front tweaking for any reason (tuner error, install error)? __________________ On board: Livewire, 4.10's, Eibach Pro kit, J&M LCAs, Steeda adjustable panhard bar, FlowMaster American Thunders, 245/275 Wide Ovals. Wish list: Watts link, T56 (high ratio), Aluminum DS and Flywheel, Centri blower, Mac Mini with 7" screen.

June 22nd, 2007, 09:05 PM	#21
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	Well, the car is dead now! had to get the wrecker to take it to the tuner this afternoon. Car all the sudden threw code for cam phaser, all 8 injectors, and EVAP, and then the typica systems check code. I also told him to fix the back wash and he said we are going to have to add to the pipeing on the intake to make coil around back towards the back of the motor... it's all a mess

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

June 23rd, 2007, 02:37 AM	#25
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	I was really hopeing my car would be nice and dependable but after today I have kinda lost the faith... I'm gonna give my tuner is good chance at it and if I continue to have trouble with it... I'm going back to N/A or another poweradder (already have KB boost a pump, injectors, plugs, tuner, ect. installed) There is nothing wrong with my tune or the install, there has to be a problem somewhere in the kit or computer system. If Hellion says there should be no backwash, then I may just have him send me another intake tube/BPV to see if that could be it, forgot to ask tuner if a better BPV would help...

June 23rd, 2007, 04:14 PM	#27
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	I got my bets on it is Hellion's fault because the tune is dead on and very conservative... My main concern right now is the cam phasor code it threw... hopefully it is something as simple as just the sensor and not the actual cam gear? Chris, what would I need to do to get rid of the backwash if I dont modify my intake tube, whatever I spend money on to get rid of it, I want to make sure it completly gets rid of it after the first change I make to it... Dont wanna purchase something and then have to buy something else as well to make sure it is gone

June 23rd, 2007, 06:47 PM	#29
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	ok, I will mention all this to my tuner...

June 25th, 2007, 09:12 PM	#30
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	well tuner found the pipe going down from the turbo had poped off and that was causing all the stalling and weird stuff like the injector codes and evap's. Goes back on the dyno tomarrow to make sure everything is alright and he believes he can get rid of the backwash with a little change in tune

June 25th, 2007, 11:43 PM	#33
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,319	Glad your getting it resolved, keep us updated man. __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto DR's, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips, BMR RadMustangs Store

June 26th, 2007, 09:46 AM	#34
ChrisJ MuchCoolerThanGTsetGO 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 16,389	Figured it was tuner issues... Tell him to roll your piping so it wont happen again... __________________ My Junk www.myspace.com/cjobe

Threads Similar to: Turbo is done, got a question for you turbo guru's
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger, Twin Turbo, and Single Turbo	justinsstang	Poweradders	24	March 7th, 2007 10:07 PM
Mellon's Twin Turbo Stealth vs Wills99z's Single Turbo z28	Mellon	Videos	10	December 30th, 2006 11:05 AM
Turbo Question..	J Mac0123	99-04	9	November 8th, 2006 05:31 AM
Turbo, Twin Turbo, Procharger, or Kennebell?	black94gt	5.0 Mustangs	19	October 7th, 2006 11:41 AM
Super Charger vs Turbo/Twin Turbo: Pros and Cons of each	FireryDriver	2005+	9	September 17th, 2006 05:15 PM

All times are GMT -4. The time now is 02:50 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.