Opinions

TheDuke · June 30th, 2007, 07:42 AM

I am looking at putting a body kit on my car and am torn between Cervinis C kit and Shelby's CS8 kit. Help me decide please!

Cervninis: www.cervinis.com
Shelby CS8: http://www.shelbyautos.com/gallery.asp?car=cs6blue

TheUNZippee! · June 30th, 2007, 07:44 AM

Personally I prefer the look of the Cervini's.

Regency 2007 · June 30th, 2007, 09:18 AM

I like the way that shelby looks. I think the Cervinis looks good but I dont really care for the rear bumper, and the oversized wing on the back...

Grabber523 · June 30th, 2007, 07:16 PM

Love em both...I'm getting pieces of the Cervinis c kit...so go with the shelby!!

Texmjs · July 1st, 2007, 10:45 AM

I had mine built from the Dealer ship for two reasons, 100% all the work, including the paint!

I would suggest the following:
1. Clean the parts when they come, rubbing alcohol helps remove the chemicals from the mold making. Let the parts DRY in the SUN!!!
2. apply finder, or truck bed liner paint to the under parts of the kit. This avoids rubbing and repainting back at the shop!!!
3. I would suggest adding thin metal sheets to the front lower chin "diamond plated"
4. My ride is 4/1/2 off the ground front and sides. This was due to the Ebach springs and the 20' rims and Nitto tires.
5. Ensure the bumper is applied correctly she has a big A** so take care of her when adding her short skirt!
6. I had the racing strips painted not the cheap stickers, make sure everything lines up "laser".
7. Enjoy the attention, she gets looks every time where on a date! People will stop and take photos its worth the effort!!!!

Peace!

Francis · July 1st, 2007, 11:47 AM

Personally, I prefer the CS8 kit - I think it works a bit better with the bodylines of the S197, where the Cervini kit is trying more to make it look like "that shelby from that movie".

Ironically, the Shelby kit looks more modern where the Cervini kit looks "more like a Shelby"

Added bonus, the CS8 looks better without the rear quarter window fake scoops, but the Cervini kit doesn't really work without them. So if you go with the CS8, you get to check your blind spot if you're in the mood.

Either way, they both look great, you can't really go wrong.

June 30th, 2007, 07:42 AM	#1
TheDuke Regular 2006 Mustang GT Join Date: Dec 2006 Location: Middle of Nowhere Wyo Posts: 55	Opinions I am looking at putting a body kit on my car and am torn between Cervinis C kit and Shelby's CS8 kit. Help me decide please! Cervninis: www.cervinis.com Shelby CS8: http://www.shelbyautos.com/gallery.asp?car=cs6blue __________________

June 30th, 2007, 07:44 AM	#2
TheUNZippee! Mods Are People Too! 2007 Mustang GT 282 rwhp/292 rwtq Join Date: Jan 2007 Location: I've got Rags in my bubble and I don't know what to do with it! Posts: 15,070	Personally I prefer the look of the Cervini's. __________________ Dyno Pull/MBRP's - The pee Test My Mods Keep your flaming in the Burnout Box if you want to remain a MM member.

June 30th, 2007, 09:18 AM	#3
Regency 2007 Hardcore Enthusiast Join Date: May 2007 Posts: 1,138	I like the way that shelby looks. I think the Cervinis looks good but I dont really care for the rear bumper, and the oversized wing on the back... __________________

June 30th, 2007, 07:16 PM	#4
Grabber523 Hardcore Enthusiast 2007 Mustang GT Join Date: Mar 2007 Location: Northwood, ND...yes, hell does freeze over... Posts: 1,065	Love em both...I'm getting pieces of the Cervinis c kit...so go with the shelby!! __________________ myspace.com/grabber523 2007 Grabber Orange GT Premium 5-Speed, CDC Sequential Taillights, 2.6L Kenne Bell, 3.73 FRPP Gears, Steeda Tri-Ax, Dynotech Alum. D/S, BMR D/S Loop

July 1st, 2007, 11:47 AM	#6
Francis Newbie Join Date: Mar 2007 Posts: 3	Personally, I prefer the CS8 kit - I think it works a bit better with the bodylines of the S197, where the Cervini kit is trying more to make it look like "that shelby from that movie". Ironically, the Shelby kit looks more modern where the Cervini kit looks "more like a Shelby" Added bonus, the CS8 looks better without the rear quarter window fake scoops, but the Cervini kit doesn't really work without them. So if you go with the CS8, you get to check your blind spot if you're in the mood. Either way, they both look great, you can't really go wrong. __________________ http://mustang.francischang.com/signature.jpg

July 1st, 2007, 10:45 AM	#5
Texmjs Newbie Join Date: Oct 2006 Location: Houston, Texas Posts: 10	I had mine built from the Dealer ship for two reasons, 100% all the work, including the paint! I would suggest the following: 1. Clean the parts when they come, rubbing alcohol helps remove the chemicals from the mold making. Let the parts DRY in the SUN!!! 2. apply finder, or truck bed liner paint to the under parts of the kit. This avoids rubbing and repainting back at the shop!!! 3. I would suggest adding thin metal sheets to the front lower chin "diamond plated" 4. My ride is 4/1/2 off the ground front and sides. This was due to the Ebach springs and the 20' rims and Nitto tires. 5. Ensure the bumper is applied correctly she has a big A** so take care of her when adding her short skirt! 6. I had the racing strips painted not the cheap stickers, make sure everything lines up "laser". 7. Enjoy the attention, she gets looks every time where on a date! People will stop and take photos its worth the effort!!!! Peace!

Threads Similar to: Opinions
Thread	Thread Starter	Forum	Replies	Last Post
Can I get your opinions?	TheUNZippee!	The Clubhouse	49	October 10th, 2007 08:00 AM
opinions please	SWEET2KSTANG	99-04	5	September 21st, 2007 12:45 PM
Need some opinions	RyanGT	99-04	9	May 20th, 2007 03:54 AM
Opinions	Mustang RacR94	Visual	11	March 12th, 2007 08:15 PM
not sure what to do cam and car opinions	gtnateam	5.0 Mustangs	5	March 9th, 2007 05:54 PM

All times are GMT -4. The time now is 04:56 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.