BBR Stage II Cams

mswift5 · July 4th, 2007, 01:25 PM

Hey guys, just put a vid of my cams on you tube. Enjoy.

http://www.youtube.com/watch?v=xBg9rxlk6t0

TDog · July 4th, 2007, 01:46 PM

nice sound, setup. What is your HP and track times ?

Regency 2007 · July 4th, 2007, 02:23 PM

nice minivan!

flattusmaximus78 · July 4th, 2007, 05:24 PM

blower, cams, full exhaust... good life!

Luis_GT · July 4th, 2007, 05:58 PM

Windveil Blue FTW!!!

mswift5 · July 5th, 2007, 02:39 AM

Will go to the track on Friday the 13th to find out my times. I have about 480 FHP and about 400 RWHP on the dyno. Running with 20's won't help my time next week, but this is my daily driver so will let you know when I find out. Have to keep the wife happy with the Freestyle. All ford family of course.

1LOUDGT · July 5th, 2007, 07:52 AM

Does the car actually move outside of the garage or is it chained to the floor?

Just screwing with you. Lets see some street video ASAP.

NamelessLiar · July 5th, 2007, 10:43 PM

So those BBR cams give you that sound? What kind of exhaust are you running?

mswift5 · July 5th, 2007, 10:50 PM

I actually forgot to put in my video that I am also running 18 inch Vibrant resonators also along with the long tube headers, high flow cats h pipe and slp loudmouth. Actually the 65 HIPO convertible never leaves the garage and my 05 is a daily driver with 45K miles on it in just over two years.

stanglifemike · July 6th, 2007, 12:30 AM

Sounds GREAT man, I love it

05mustang_kb_charged · July 6th, 2007, 03:50 AM

who put the cams in? if you did how intensive was it? how is the driveability? did you have to change the springs? thinking of them for next mod. thanks in advance fot input

mswift5 · July 6th, 2007, 10:13 AM

Blood Enterprises in Auburn did them for me. I have the Eibach pro kit on. I am in stop and go traffic for about 45 minutes each way, and the only thing new I have to do is rev a little higher to not kill the motor when starting out and cruise in one gear lower than I normally would because the cams don't like low rpms. I have my stock 3:55's and the tuner said if I go 4:10's I wouldn't have to worry about those things anymore.

1LOUDGT · July 6th, 2007, 10:28 AM

Enough of this crap get off you’re a$$ grab a buddy and get some VIDEO.

stanglifemike · July 6th, 2007, 11:35 AM

Hey Mswift, I dont think KB Charged was talking about lowering springs

05mustang_kb_charged · July 6th, 2007, 11:55 AM

yeah sorry for not being more informative.

did the valve springs have to be changed. what rpm doesn't it like i usually cruise around 2000-2200 around 70 mph and also have 3.55 gears.

mystangsak · July 6th, 2007, 04:30 PM

sounds sweet!
but i live CA and we cant do that cool stuff here and keep street legal
GAY STATE!

mswift5 · July 6th, 2007, 10:24 PM

My bad. Yep, new valve springs have to be put in. Cruising at around 900-1300 rpms will cause the car to hunt. You need to downshift to keep the rpms around 1500 and higher for cruising at a steady speed.

06RedfireGT · July 7th, 2007, 02:42 AM

hey kb_charged. grab a july issue of MM&FF they swap cams on n S197 GT. there is lots of pics. i suggest you check it out if you're interested in cams.

05mustang_kb_charged · July 7th, 2007, 04:54 PM

Originally Posted by 06RedfireGT

hey kb_charged. grab a july issue of MM&FF they swap cams on n S197 GT. there is lots of pics. i suggest you check it out if you're interested in cams.

thanks that was very informative, but i have to hold off, i made a deal with the stang devil (MY WIFE) and she said at end of year i can buy any motor i want so will hold off for a long block, cams and H series to run 25 psi.

06RedfireGT · July 7th, 2007, 05:57 PM

damn thats definetly worth the wait

July 4th, 2007, 01:25 PM	#1
mswift5 Newbie Join Date: May 2007 Posts: 26	BBR Stage II Cams Hey guys, just put a vid of my cams on you tube. Enjoy. http://www.youtube.com/watch?v=xBg9rxlk6t0

July 4th, 2007, 01:46 PM	#2
TDog Enthusiast Join Date: Jan 2007 Posts: 650	nice sound, setup. What is your HP and track times ? __________________ Tdog 2007 mustang GT 5speed, Black

July 4th, 2007, 05:24 PM	#4
flattusmaximus78 MM Fanatic 1993 5.ohhhh 14.47 at 96 mph Join Date: Apr 2006 Location: Gatorland Posts: 3,125	blower, cams, full exhaust... good life! __________________ 302 h/c/i

July 5th, 2007, 07:52 AM	#7
1LOUDGT Regular 2006 GT 11.99@114 Join Date: Sep 2006 Location: Orlando, FL. Posts: 483	Does the car actually move outside of the garage or is it chained to the floor? Just screwing with you. Lets see some street video ASAP. __________________ Aint gonna happin. http://i3.photobucket.com/albums/y51...hn/front-1.jpg

July 5th, 2007, 10:43 PM	#8
NamelessLiar Regular 2005 Mustang GT Join Date: Mar 2007 Location: Lubbock, Tx Posts: 343	So those BBR cams give you that sound? What kind of exhaust are you running? __________________ ~SLP Loudmouths~K&N CAI~BAMA Tuned SCT X-Cal 2~Hurst Shifter~ ~Cervini's Side Scoops~Roush Quarter Louvers~GTS Brake Light Covers~ ~MRT Hood Scoop~Tinted Turn Signals~FRPP Hood Pins~ Hurst Crew Member #14 See Me Scare Passenger

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 4th, 2007, 02:23 PM	#3
Regency 2007 Hardcore Enthusiast F-150 FX4 Join Date: May 2007 Location: Memphrica Posts: 1,153	nice minivan!

July 5th, 2007, 02:39 AM	#6
mswift5 Newbie Join Date: May 2007 Posts: 26	Will go to the track on Friday the 13th to find out my times. I have about 480 FHP and about 400 RWHP on the dyno. Running with 20's won't help my time next week, but this is my daily driver so will let you know when I find out. Have to keep the wife happy with the Freestyle. All ford family of course.

July 5th, 2007, 10:50 PM	#9
mswift5 Newbie Join Date: May 2007 Posts: 26	I actually forgot to put in my video that I am also running 18 inch Vibrant resonators also along with the long tube headers, high flow cats h pipe and slp loudmouth. Actually the 65 HIPO convertible never leaves the garage and my 05 is a daily driver with 45K miles on it in just over two years.

July 6th, 2007, 12:30 AM	#10
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,319	Sounds GREAT man, I love it __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto DR's, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips, BMR RadMustangs Store

July 6th, 2007, 03:50 AM	#11
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT Dyno Racer Join Date: Mar 2007 Location: LSU Country Posts: 2,272	who put the cams in? if you did how intensive was it? how is the driveability? did you have to change the springs? thinking of them for next mod. thanks in advance fot input

July 6th, 2007, 10:13 AM	#12
mswift5 Newbie Join Date: May 2007 Posts: 26	Blood Enterprises in Auburn did them for me. I have the Eibach pro kit on. I am in stop and go traffic for about 45 minutes each way, and the only thing new I have to do is rev a little higher to not kill the motor when starting out and cruise in one gear lower than I normally would because the cams don't like low rpms. I have my stock 3:55's and the tuner said if I go 4:10's I wouldn't have to worry about those things anymore.

July 6th, 2007, 10:28 AM	#13
1LOUDGT Regular 2006 GT 11.99@114 Join Date: Sep 2006 Location: Orlando, FL. Posts: 483	Enough of this crap get off you’re a$$ grab a buddy and get some VIDEO. __________________ Aint gonna happin. http://i3.photobucket.com/albums/y51...hn/front-1.jpg

July 6th, 2007, 11:35 AM	#14
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,319	Hey Mswift, I dont think KB Charged was talking about lowering springs __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto DR's, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips, BMR RadMustangs Store

July 6th, 2007, 11:55 AM	#15
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT Dyno Racer Join Date: Mar 2007 Location: LSU Country Posts: 2,272	yeah sorry for not being more informative. did the valve springs have to be changed. what rpm doesn't it like i usually cruise around 2000-2200 around 70 mph and also have 3.55 gears.

Threads Similar to: BBR Stage II Cams
Thread	Thread Starter	Forum	Replies	Last Post
VT Stage 2 cams?	ckjacobus	96-98	2	September 7th, 2007 11:27 PM
stage II cams	Monster stang 97	99-04	16	May 13th, 2007 11:49 PM
WTB: VT stage 2 cams	matrixpuba	Want to Buy	0	April 27th, 2007 03:00 AM
bbr stage 2 cams...	jat	2005+	16	February 17th, 2007 08:26 AM
VT Stage 2 Cams	DirtyMach1	99-04	19	January 22nd, 2007 11:14 AM

All times are GMT -4. The time now is 01:30 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

July 6th, 2007, 04:30 PM	#16
mystangsak Regular Join Date: Jun 2007 Location: California Posts: 116	sounds sweet! but i live CA and we cant do that cool stuff here and keep street legal GAY STATE! __________________ 06 GT jba shorties jba axle backs pro 5.0

July 6th, 2007, 10:24 PM	#17
mswift5 Newbie Join Date: May 2007 Posts: 26	My bad. Yep, new valve springs have to be put in. Cruising at around 900-1300 rpms will cause the car to hunt. You need to downshift to keep the rpms around 1500 and higher for cruising at a steady speed.

July 7th, 2007, 02:42 AM	#18
06RedfireGT Red ♥ Zippy 2006 Mustang GT In the 13's Join Date: Aug 2006 Location: I'm so badass I make medicine cry Posts: 10,632	hey kb_charged. grab a july issue of MM&FF they swap cams on n S197 GT. there is lots of pics. i suggest you check it out if you're interested in cams.

July 7th, 2007, 05:57 PM	#20
06RedfireGT Red ♥ Zippy 2006 Mustang GT In the 13's Join Date: Aug 2006 Location: I'm so badass I make medicine cry Posts: 10,632	damn thats definetly worth the wait