3.73's or 4.10's?

silverstang05 · August 28th, 2007, 03:41 PM

Ok im stuck on which gears to get. I go to the track occansionly but not that much. I use my car more on the street. What would be good gears to get that are good for a stop and a rolling start say like 20 or 40mph?
Thanks
Brian

HMUSN · August 28th, 2007, 03:42 PM

4:10 all the way.

TheUNZippee! · August 28th, 2007, 03:43 PM

four ten's.

silverstang05 · August 28th, 2007, 03:43 PM

Well i was thinking 4.10's. I drove my friends camaro z28 that runs 11.9's in the 1/4 mile and when you stomp on it as low as 2k rpms the thing just takes off! I want that same feeling.

HMUSN · August 28th, 2007, 03:46 PM

think no longer.

get Frpp 4:10's.

silverstang05 · August 28th, 2007, 03:48 PM

Originally Posted by HMUSN

think no longer.

get Frpp 4:10's.

Do you have a link as to where i can get them?

HMUSN · August 28th, 2007, 03:53 PM

sure link

silverstang05 · August 28th, 2007, 04:00 PM

Ok thanks HMUSN! One more thing all i need is the gears themselves or do i need the bearing kit too to install them?

HMUSN · August 28th, 2007, 04:03 PM

yea go ahead and get the master bearing install kit.

if your doing to install yourself your also going to need
gear oil and friction modifier

make sure you PM the vendor before you buy.

you get a discount for being a member here and they need to give you the code.

silverstang05 · August 28th, 2007, 04:23 PM

ok thanks again!!

HMUSN · August 28th, 2007, 05:16 PM

no problem

August 28th, 2007, 03:41 PM	#1
silverstang05 Regular Join Date: Aug 2007 Location: Delray Beach Posts: 199	3.73's or 4.10's? Ok im stuck on which gears to get. I go to the track occansionly but not that much. I use my car more on the street. What would be good gears to get that are good for a stop and a rolling start say like 20 or 40mph? Thanks Brian __________________ 2005 Mustang GT -STS single turbo kit 478whp/465wtq @10psi -Fidanza 4.3 clutch Should i use my race gas tune i have?? http://i104.photobucket.com/albums/m...er7/stang3.jpg

August 28th, 2007, 03:43 PM	#4
silverstang05 Regular Join Date: Aug 2007 Location: Delray Beach Posts: 199	Well i was thinking 4.10's. I drove my friends camaro z28 that runs 11.9's in the 1/4 mile and when you stomp on it as low as 2k rpms the thing just takes off! I want that same feeling. __________________ 2005 Mustang GT -STS single turbo kit 478whp/465wtq @10psi -Fidanza 4.3 clutch Should i use my race gas tune i have?? http://i104.photobucket.com/albums/m...er7/stang3.jpg

August 28th, 2007, 04:00 PM	#8
silverstang05 Regular Join Date: Aug 2007 Location: Delray Beach Posts: 199	Ok thanks HMUSN! One more thing all i need is the gears themselves or do i need the bearing kit too to install them? __________________ 2005 Mustang GT -STS single turbo kit 478whp/465wtq @10psi -Fidanza 4.3 clutch Should i use my race gas tune i have?? http://i104.photobucket.com/albums/m...er7/stang3.jpg

August 28th, 2007, 04:23 PM	#10
silverstang05 Regular Join Date: Aug 2007 Location: Delray Beach Posts: 199	ok thanks again!! __________________ 2005 Mustang GT -STS single turbo kit 478whp/465wtq @10psi -Fidanza 4.3 clutch Should i use my race gas tune i have?? http://i104.photobucket.com/albums/m...er7/stang3.jpg

Threads Similar to: 3.73's or 4.10's?
Thread	Thread Starter	Forum	Replies	Last Post
4.10's or 3.73's	ricvpi	Drivetrain	11	February 9th, 2008 10:52 PM
3.73's or 4.10's..need help. dont know much	adamo41188	99-04	50	September 3rd, 2007 10:18 PM
3.73's or 4.10's	TheBusher	99-04	9	August 4th, 2007 06:47 PM
SWAPING 2.73's OUT FOR 4.10's.... How much better on 1/8th?	88dragstang	Drag	3	June 27th, 2007 10:21 PM
3.73's or 4.10's	Redrider	94-95	18	March 11th, 2007 11:13 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 28th, 2007, 03:42 PM	#2
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,307	4:10 all the way.

August 28th, 2007, 03:46 PM	#5
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,307	think no longer. get Frpp 4:10's.

August 28th, 2007, 03:53 PM	#7
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,307	sure link

August 28th, 2007, 04:03 PM	#9
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,307	yea go ahead and get the master bearing install kit. if your doing to install yourself your also going to need gear oil and friction modifier make sure you PM the vendor before you buy. you get a discount for being a member here and they need to give you the code.

August 28th, 2007, 05:16 PM	#11
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,307	no problem

All times are GMT -4. The time now is 12:24 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.