Dyno results in!!

stanglifemike · September 3rd, 2007, 10:41 AM

Well I found out on Fri that there is a dyno shop about 5 minutes up the street from me. They just opened a few weeks ago. Had a car show and dyno day on Saturday, and it turns out that I know the owner so I'm stoked. Anyway, what everyones here for: I made 306.7 horses and 319.2 in torque, to the rear wheels. And this was on a Mustang dyno, which I think are lower than most because it puts a load on the car.

flattusmaximus78 · September 3rd, 2007, 10:43 AM

Very nice numbers!

Whats your mods?

acehogg69 · September 3rd, 2007, 10:45 AM

Nice #'s!

blackmustang285 · September 3rd, 2007, 12:17 PM

those are good numbers. What are your mods?

silverstang05 · September 3rd, 2007, 12:18 PM

Nice numbers!

Luis_GT · September 3rd, 2007, 12:36 PM

Very nice!

and for those asking, accoarding to his sig he has
06 GT: JLT, SCT, Borla, Pypes, Steeda (i'm guessing U/D)

HMUSN · September 3rd, 2007, 12:37 PM

congrats man

05mustang_kb_charged · September 3rd, 2007, 12:38 PM

awesome numbers especially on mustang dyno, add another 18 to 20 horsepower and should be close to where you would be on dynojet

nba1341 · September 3rd, 2007, 12:44 PM

Originally Posted by 05mustang_kb_charged

awesome numbers especially on mustang dyno, add another 18 to 20 horsepower and should be close to where you would be on dynojet

which is more accurate

07gtmustang · September 3rd, 2007, 01:12 PM

Great #'s the mustang dyno is more accurate to real world numbers b/c it puts a load on the car

05mustang_kb_charged · September 3rd, 2007, 01:28 PM

Originally Posted by 07gtmustang

Great #'s the mustang dyno is more accurate to real world numbers b/c it puts a load on the car

that is correct i have been doing alot of talking to mustangdyne and dynojet, i am looking to buy one sometime next year and asked alot of questions, a mustang dyno uses weighted drums and an eddy current brake system to load the weight of the car, the brake/load system allows for vehicle weight input and increases for wind drag when doing quarter mile passes

stanglifemike · September 3rd, 2007, 03:57 PM

Thanks everyone, I was very pleased. Mods are Steeda Udp's, JLT cai, SCT X-cal 2(w/ Doug's performance tune), FRPP/Borla Stingers, Pyes o/r h pipe.
The dyno shop has the tree mounted and ready to run quarter mile times too. I talked to a few guys who had done that and said it was really accurate. I might give that a try next.

leebunnyz · September 3rd, 2007, 04:00 PM

those are great #'s, i have the same mods i hope my car is making that much power

stanglifemike · September 3rd, 2007, 04:10 PM

I dont have a scanner, but I tried to take some pics of the sheet.

TheUNZippee! · September 3rd, 2007, 04:11 PM

Nice numbers, Mike

stanglifemike · September 3rd, 2007, 10:29 PM

Thanks zip : kicks Zip in the ankle for payback:

Luis_GT · September 3rd, 2007, 10:30 PM

You should of kicked him in the shins.

TheUNZippee! · September 3rd, 2007, 10:30 PM

sonofa

nba1341 · September 3rd, 2007, 10:42 PM

what is this with WCF mean??????????????????

HMUSN · September 3rd, 2007, 10:45 PM

Originally Posted by nba1341

what is this with WCF mean??????????????????

WCF= weather correction factor

September 3rd, 2007, 10:41 AM	#1
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,277	Dyno results in!! Well I found out on Fri that there is a dyno shop about 5 minutes up the street from me. They just opened a few weeks ago. Had a car show and dyno day on Saturday, and it turns out that I know the owner so I'm stoked. Anyway, what everyones here for: I made 306.7 horses and 319.2 in torque, to the rear wheels. And this was on a Mustang dyno, which I think are lower than most because it puts a load on the car. __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

September 3rd, 2007, 10:43 AM	#2
flattusmaximus78 MM Fanatic 1993 5.ohhhh 14.47 at 96 mph Join Date: Apr 2006 Location: Gatorland Posts: 4,447	Very nice numbers! Whats your mods? __________________ exploder top end with 12 psi of v-tech

September 3rd, 2007, 10:45 AM	#3
acehogg69 Hardcore Enthusiast 06 GT with bolt ons I sucked Join Date: Oct 2006 Location: Cheese country!! aka WI Posts: 1,091	Nice #'s! __________________ Kyle Busch Haters Club!! Member Uno! Tony wrote "Blowers blow, turbos suck, and nitrous rules!!! lol " Borla cattless L/T's topped with Flowmasters , Roush short throw, JLT2 CAI w/ X-CAL2 from Brenspeed, Bullit 18X9 and 18X10 deep dish.

September 3rd, 2007, 12:18 PM	#5
silverstang05 Regular Join Date: Aug 2007 Location: Delray Beach Posts: 199	Nice numbers! __________________ 2005 Mustang GT -STS single turbo kit 478whp/465wtq @10psi -Fidanza 4.3 clutch Should i use my race gas tune i have?? http://i104.photobucket.com/albums/m...er7/stang3.jpg

September 3rd, 2007, 12:38 PM	#8
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,439	awesome numbers especially on mustang dyno, add another 18 to 20 horsepower and should be close to where you would be on dynojet __________________ A Couple Bolt-Ons and GOOD Air 690 rwhp and 550 rwtq on 21 psi. through a 4R70W F/I Crew Member #1 KENNE BELL Crew Member #1 My Personal Website Best Mustang Store on Internet

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

September 3rd, 2007, 12:17 PM	#4
blackmustang285 Regular 2006 Mustang GT Join Date: Aug 2007 Location: Texas Posts: 297	those are good numbers. What are your mods?

September 3rd, 2007, 01:12 PM	#10
07gtmustang Enthusiast 2007 GT Join Date: May 2007 Posts: 555	Great #'s the mustang dyno is more accurate to real world numbers b/c it puts a load on the car

September 3rd, 2007, 03:57 PM	#12
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,277	Thanks everyone, I was very pleased. Mods are Steeda Udp's, JLT cai, SCT X-cal 2(w/ Doug's performance tune), FRPP/Borla Stingers, Pyes o/r h pipe. The dyno shop has the tree mounted and ready to run quarter mile times too. I talked to a few guys who had done that and said it was really accurate. I might give that a try next. __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

September 3rd, 2007, 04:00 PM	#13
leebunnyz MM Fanatic Join Date: Feb 2007 Location: Vineland, NJ Posts: 3,546	those are great #'s, i have the same mods i hope my car is making that much power __________________ Jesus Christ is #1 "The Founder Of Crews"

September 3rd, 2007, 10:29 PM	#16
stanglifemike IBEATU 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 4,277	Thanks zip : kicks Zip in the ankle for payback: __________________ 98 GT: some stuff 06 GT: some more stuff Paxton/Vortech Crew Member #3 RadMustangs Store Injected Engineering

September 3rd, 2007, 10:42 PM	#19
nba1341 Banned 1965 Mustang Fastback Join Date: Apr 2007 Location: Los Angeles, Cal Posts: 24,982 Posts: 2,197	what is this with WCF mean??????????????????

Threads Similar to: Dyno results in!!
Thread	Thread Starter	Forum	Replies	Last Post
Dyno Results?	Wally1968	2005+	35	November 21st, 2007 02:21 PM
My Dyno Results	WAVEBYE	The Clubhouse	46	October 25th, 2007 10:47 PM
Sniper New Tune...and Dyno Results...	02ponypackage	Electronics	29	September 11th, 2007 11:09 PM
Dyno Results 06 GT Supercharger With 20's	Pro Form	2005+	56	August 14th, 2007 06:26 AM
My DYNO results are in!!	Bossman	2005+	18	February 7th, 2007 08:34 PM

All times are GMT -4. The time now is 10:36 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.