Good Price for Ring and Pinion Swap?

menace07 · October 23rd, 2007, 04:31 PM

Now that the jlt cai and sct are on I wanna do 4.10 gears. A ford tech that has done gear swaps for me in the past said it would be about $450 for the install (about 6hrs labor). This guy does great work and is very picky about his installations, but the price seems a little steep. What have you guys paid for install? I called modular depot, which is nearby, and they said about $250 for the labor, but I've never dealt with them before. Thanks for the help

usafimj · October 23rd, 2007, 05:00 PM

I've been quoted $750 which includes gears, shim pack, RP 75/140, etc. minus the recalibration for the speedo. Not sure if this is a good price maybe someone can chime in on the both of us

1FastFox · October 23rd, 2007, 05:20 PM

$450 is not a bad price... Not a great pirce but not a bad one.

Grabber523 · October 24th, 2007, 09:48 AM

I paid about 450 at the stealership for my install as well..but they did an awesome job...no whine, no clunking...

Grabber427 · October 24th, 2007, 02:51 PM

If the guy is as good as you say he is then $450 is a great price. You could easily pay the same for some hack that's gonna lead to problems down the road.

leebunnyz · October 24th, 2007, 02:57 PM

Originally Posted by menace07

Now that the jlt cai and sct are on I wanna do 4.10 gears. A ford tech that has done gear swaps for me in the past said it would be about $450 for the install (about 6hrs labor). This guy does great work and is very picky about his installations, but the price seems a little steep. What have you guys paid for install? I called modular depot, which is nearby, and they said about $250 for the labor, but I've never dealt with them before. Thanks for the help

is the ford tech installing your gears while at the ford dealership or after work in his garage? because i would pay the extra $200 to keep my warranty just incase something happens to the rear end, then they would have to fix it without you paying thousands of dollars for repairs.

psycho bob · October 24th, 2007, 04:22 PM

although a bit pricey having your gears done by someone that truely knows what they are doing is vital. some can do them for cheap and some are very expensive, but the quality is a must. i know a guy that put 4.10's in a cobra and there is no noise or vibration and it was only a $200 install.

GTsetGO · October 24th, 2007, 04:23 PM

i paid $250 above what i paid for the gears to hvae mine put in. now i just have to get a stronger rear end due to mine starting to go bad. fun fun

menace07 · October 24th, 2007, 04:43 PM

He would do them at the dealership. Anybody ever deal with modular depot before?

usafimj · October 24th, 2007, 05:33 PM

Does $750 sound like a good deal if it includes everything gears, new shims, RP fluid, etc.

06RedfireGT · October 24th, 2007, 08:04 PM

No, that really high. Who quoted you that price?

06RedfireGT · October 24th, 2007, 08:07 PM

Wait that includes gears. Never mind. That is a decent price.

psycho bob · October 24th, 2007, 10:21 PM

decent is about it. do your homework on how much you could get all the parts and fluid for. then call and see how much just for the install. most places jack up the price for parts also.

October 23rd, 2007, 04:31 PM	#1
menace07 Regular 2007 Mustang GT Faster than a prius Join Date: Sep 2007 Posts: 444	Good Price for Ring and Pinion Swap? Now that the jlt cai and sct are on I wanna do 4.10 gears. A ford tech that has done gear swaps for me in the past said it would be about $450 for the install (about 6hrs labor). This guy does great work and is very picky about his installations, but the price seems a little steep. What have you guys paid for install? I called modular depot, which is nearby, and they said about $250 for the labor, but I've never dealt with them before. Thanks for the help

October 23rd, 2007, 05:00 PM	#2
usafimj Hardcore Enthusiast 2007 Ford Mustang GT 13.491 @ 106.19mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 1,885	I've been quoted $750 which includes gears, shim pack, RP 75/140, etc. minus the recalibration for the speedo. Not sure if this is a good price maybe someone can chime in on the both of us __________________ '07 GT, 5spd, G.O., JLT CAI, X3, Hurst Shifter, FRPP 4.10, Stage II NSR Comp Cams, Kooks LT, catted H, FRPP Stingers Hurst Crew Member #13 Cammed Crew Military Crew E-5

October 23rd, 2007, 05:20 PM	#3
1FastFox Hardcore Enthusiast Join Date: Mar 2007 Location: Indiana Posts: 1,901	$450 is not a bad price... Not a great pirce but not a bad one. __________________ Aston DB9, 91 GT Hatch, 06 EB Explorer Aston Crew Member #1 ( of 1 ) http://zombo.com/

October 24th, 2007, 09:48 AM	#4
Grabber523 Hardcore Enthusiast 2007 Mustang GT Join Date: Mar 2007 Location: Northwood, ND...yes, hell does freeze over... Posts: 1,004	I paid about 450 at the stealership for my install as well..but they did an awesome job...no whine, no clunking... __________________ myspace.com/grabber523 2007 Grabber Orange GT Premium 5-Speed, CDC Sequential Taillights, 2.6L Kenne Bell, 3.73 FRPP Gears, Steeda Tri-Ax, Dynotech Alum. D/S, BMR D/S Loop

October 24th, 2007, 02:51 PM	#5
Grabber427 Regular 2007 Roush 427R Join Date: Jan 2007 Location: Vestal, New York Posts: 105	If the guy is as good as you say he is then $450 is a great price. You could easily pay the same for some hack that's gonna lead to problems down the road. __________________ 2007 Roush 427R #07-486 FRPP 3.73 Gears Roush short throw shifter Roush 73mm pulley and tune

October 24th, 2007, 04:22 PM	#7
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 2,136	although a bit pricey having your gears done by someone that truely knows what they are doing is vital. some can do them for cheap and some are very expensive, but the quality is a must. i know a guy that put 4.10's in a cobra and there is no noise or vibration and it was only a $200 install. __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, D-specs, BMR LCA's, Adj. Panhard bar&support, Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets, black grill waiting install: GT/CS bumper, BMR shaft loops

October 24th, 2007, 04:43 PM	#9
menace07 Regular 2007 Mustang GT Faster than a prius Join Date: Sep 2007 Posts: 444	He would do them at the dealership. Anybody ever deal with modular depot before? __________________ black 07 GT, jlt2 cai, sct2 brenspeed 93 octane tune, spydershaft, triax, magnaflow catted x,steeda axleback, tokico dspecs, steeda sport springs, steeda adj. panhard bar/ brace, steeda adj front swaybar, rear swaybar with billet endlinks

October 24th, 2007, 05:33 PM	#10
usafimj Hardcore Enthusiast 2007 Ford Mustang GT 13.491 @ 106.19mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 1,885	Does $750 sound like a good deal if it includes everything gears, new shims, RP fluid, etc. __________________ '07 GT, 5spd, G.O., JLT CAI, X3, Hurst Shifter, FRPP 4.10, Stage II NSR Comp Cams, Kooks LT, catted H, FRPP Stingers Hurst Crew Member #13 Cammed Crew Military Crew E-5

October 24th, 2007, 10:21 PM	#13
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 2,136	decent is about it. do your homework on how much you could get all the parts and fluid for. then call and see how much just for the install. most places jack up the price for parts also. __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, D-specs, BMR LCA's, Adj. Panhard bar&support, Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets, black grill waiting install: GT/CS bumper, BMR shaft loops

Threads Similar to: Good Price for Ring and Pinion Swap?
Thread	Thread Starter	Forum	Replies	Last Post
Ring and pinion gear question	06silvergt	2005+	2	September 13th, 2007 05:29 PM
Requirements for installation of new ring and pinion gears?	shurb125	5.0 Mustangs	6	February 17th, 2007 11:12 PM
Good price?	2000Mustang	V6 Mustangs	8	January 23rd, 2007 04:21 PM
Good price for engine swap??	silver_96	96-98	6	January 21st, 2007 10:53 AM
is this a good price?	artisan00	V6 Mustangs	16	November 4th, 2005 12:38 AM

All times are GMT -4. The time now is 11:32 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

Good Price for Ring and Pinion Swap?

Good Price for Ring and Pinion Swap?

Re: Good Price for Ring and Pinion Swap?