jba shorties and pypes o/r h-pipe

APER · October 29th, 2007, 09:24 PM

hey guys i know the shorties don't do crap for hp but i plan on getting a turbo later so thats why i made this choice plus its still fu modding. i just put on the BBK TB and i know guys but i havent had any problems yet i made sure to get a tune from bamachips ( 91 race tune) and no engine light or idle probs. i love the low and high end curve i feel as the rpm increases i can feel the pull better than before. anyways i posted to let you guys know when my exhaust comes in i'l be posting a video so you all can hear my new exhaust.

Jucostud · October 29th, 2007, 09:27 PM

It should sound pretty good!

APER · October 31st, 2007, 04:33 PM

hey gusy i just got my exhaust in i'll put it on tomorrow i was reading the instructions and it said i can still use the studs instead of the bolts they supplied has anyone put a set of JBA shorties on and used the studs instead? anyways i'll post son with the vid if i can figure it out.

texas_mustang · October 31st, 2007, 09:10 PM

use anything and everything they supply. they supply it for a reason, and if you fuck up, they can use you not using the bolts as an excuess for not reimbursing you

APER · December 12th, 2007, 11:24 PM

jba shorties, o/r pypes h-pipe, steeda axlebacks - Video

the video is ok i'll post a better one later. the sound is awesome though but the vid really doesnt do any justice

mustang fanatic · December 12th, 2007, 11:27 PM

Originally Posted by APER

APER · October 8th, 2008, 03:26 PM

i believe the link works now although not a great video. I'll need to get a beter one, the exhaust note really is not the best in this video.

RX Bandit · October 8th, 2008, 03:55 PM

well you just convinced me since i was going turbo anyway but i was think mac prochambe and steeda shorties

07stanggt · October 8th, 2008, 04:16 PM

Originally Posted by RX Bandit

well you just convinced me since i was going turbo anyway but i was think mac prochambe and steeda shorties

why wouldnt you just get mac shorties and the prochamber. they are cheaper ceramic coated and you would be able to work a better deal on the set then each as individuals from seperate manufacturers

mustang fanatic · October 8th, 2008, 05:01 PM

Also shorties do give some hp but they give more torque than anything.

302svt · October 13th, 2008, 07:04 AM

Sounds good, were they hard to install.

October 29th, 2007, 09:24 PM	#1
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 157	jba shorties and pypes o/r h-pipe hey guys i know the shorties don't do crap for hp but i plan on getting a turbo later so thats why i made this choice plus its still fu modding. i just put on the BBK TB and i know guys but i havent had any problems yet i made sure to get a tune from bamachips ( 91 race tune) and no engine light or idle probs. i love the low and high end curve i feel as the rpm increases i can feel the pull better than before. anyways i posted to let you guys know when my exhaust comes in i'l be posting a video so you all can hear my new exhaust.

October 29th, 2007, 09:27 PM	#2
Jucostud The Tire Guy 2007 Mustang 8.32@84.2mph 1/8 Join Date: Nov 2006 Location: North of Dallas, TX Posts: 4,730	It should sound pretty good! __________________ 344hp and 324tq"Cam only" Tuned by LT Motorsports

December 12th, 2007, 11:24 PM	#5
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 157	New Exhuast Video jba shorties, o/r pypes h-pipe, steeda axlebacks - Video the video is ok i'll post a better one later. the sound is awesome though but the vid really doesnt do any justice Last edited by APER : December 12th, 2007 at 11:27 PM.

October 8th, 2008, 03:26 PM	#7
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 157	i believe the link works now although not a great video. I'll need to get a beter one, the exhaust note really is not the best in this video. __________________ http://videos.streetfire.net/video/0...ust_143888.htm My mods: Comp NSR II's, JBA shorties, Pypes o/r H-pipe, Steeda axlebacks, Steeda UD, BBK TB, Steeda CAI, FRPP4.10, BMR panhard/LCA/Relo, Eibach springs, D-specs,Bama 91race/cam/4.10

October 8th, 2008, 03:55 PM	#8
RX Bandit Regular Join Date: Jun 2007 Posts: 165	well you just convinced me since i was going turbo anyway but i was think mac prochambe and steeda shorties __________________ BBR SCT 93 Octane Race Tune Steeda: CAI,UDP, IMRC, Axle Back, Triax BBK Twin 62mm 3% w/ 70% windshield, GTStyling Rear BlackOut Xenon 10000k Hid Halo Led Projector + Bumper Lights 18x10 & 18x9 Black S Style Rims

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

October 31st, 2007, 04:33 PM	#3
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 157	hey gusy i just got my exhaust in i'll put it on tomorrow i was reading the instructions and it said i can still use the studs instead of the bolts they supplied has anyone put a set of JBA shorties on and used the studs instead? anyways i'll post son with the vid if i can figure it out.

October 31st, 2007, 09:10 PM	#4
texas_mustang Banned Join Date: Dec 2006 Posts: 2,077	use anything and everything they supply. they supply it for a reason, and if you fuck up, they can use you not using the bolts as an excuess for not reimbursing you

October 8th, 2008, 05:01 PM	#10
mustang fanatic Hardcore Enthusiast S197 Performance.com Join Date: Jan 2007 Location: Orange County Posts: 2,119	Also shorties do give some hp but they give more torque than anything. __________________ 1994 Cobra

October 13th, 2008, 07:04 AM	#11
302svt Regular Join Date: Nov 2007 Location: Eastern, KY Posts: 154	Sounds good, were they hard to install.

Threads Similar to: jba shorties and pypes o/r h-pipe
Thread	Thread Starter	Forum	Replies	Last Post
pypes x pipe	6banger96	V6 Mustangs	9	November 10th, 2007 03:53 AM
Pypes O/R x pipe (99-04)	\|TH\|BLaCkStAnG	Exhaust	10	October 17th, 2007 12:29 AM
99-04 PYPES X-PIPE 4.6	HTK241	Exhaust	4	October 4th, 2007 11:38 PM
Pypes X pipe 99-04	\|TH\|BLaCkStAnG	Trade	2	October 3rd, 2007 04:39 PM
Pypes off road x pipe?	midnightrace	99-04	11	October 16th, 2006 04:48 AM

All times are GMT -4. The time now is 05:57 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

jba shorties and pypes o/r h-pipe

jba shorties and pypes o/r h-pipe

New Exhuast Video