Pistons Rods

Bhblondguy · November 5th, 2007, 10:10 PM

If I want to upgrade my pistons and rods to withstand a good shot of nitrous - 150rwhp shot - what would be a good company to buy from?

Is this the only thing that needs to be upgraded besides colder spark plugs?

Are the heads in danger if I use nitrous? I will have everything tuned at the dyno.

Will I have to upgrade the fuel pump?

I will probably be buying nitrous next month so any input would be helpful. Thanks!

Bhblondguy · November 6th, 2007, 09:54 AM

also has anyone had a stroker kit installed in their car?? how much hp can you gain from one?

psycho bob · November 6th, 2007, 10:08 AM

you should probably just call someplace like www.livernoismotorsports.com

they will be able to answer these questions better than most anyone on here can. there would be many factors to how much power a stroker motor would put out. a big one would be how much compression you would have. will you be SC'ed later or just N/A

06saleen3v · November 7th, 2007, 01:50 PM

if you are going to replace your pistons and rods with forged parts, might as well do the whole rotational assembly and get a forged crank as well...

November 5th, 2007, 10:10 PM	#1
Bhblondguy Enthusiast 2005 Mustang GT 12.002@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 722	Pistons Rods If I want to upgrade my pistons and rods to withstand a good shot of nitrous - 150rwhp shot - what would be a good company to buy from? Is this the only thing that needs to be upgraded besides colder spark plugs? Are the heads in danger if I use nitrous? I will have everything tuned at the dyno. Will I have to upgrade the fuel pump? I will probably be buying nitrous next month so any input would be helpful. Thanks!

November 6th, 2007, 09:54 AM	#2
Bhblondguy Enthusiast 2005 Mustang GT 12.002@114.82 Join Date: Jul 2007 Location: Baytown, Tx. Posts: 722	also has anyone had a stroker kit installed in their car?? how much hp can you gain from one? __________________ The Black Beast ----------------------- 415rwhp and 455ftlbs of torque ZEX CREW FOUNDER HURST CREW MEMBER #7

November 6th, 2007, 10:08 AM	#3
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 2,315	you should probably just call someplace like www.livernoismotorsports.com they will be able to answer these questions better than most anyone on here can. there would be many factors to how much power a stroker motor would put out. a big one would be how much compression you would have. will you be SC'ed later or just N/A __________________ I just wanna go fast and I don't have enough stuff to do it.

November 7th, 2007, 01:50 PM	#4
06saleen3v Regular Join Date: Oct 2007 Location: San Diego, California Posts: 331	if you are going to replace your pistons and rods with forged parts, might as well do the whole rotational assembly and get a forged crank as well... __________________ 2006 Saleen 3V #483 301rwhp 316rwtq Pypes O/R H-Pipe SCT XCal2 C&L CAI Hurst Short Throw Shifter Saleen 3:73 gears Smoked Tailights 3M ClearBra Tint

Threads Similar to: Pistons Rods
Thread	Thread Starter	Forum	Replies	Last Post
Need Suggestion On What Type Of Rods And Pistons	dbsaum	5.0 Mustangs	18	February 12th, 2008 02:26 PM
pistons rods	Bhblondguy	2005+	11	November 7th, 2007 05:46 PM
Pistons Rods	Bhblondguy	2005+	0	November 5th, 2007 10:08 PM
pistons and rods on the cobra...	WVSNS&	99-04	3	March 10th, 2007 08:11 AM
Cobra Motor with manley rods and pistons. ne one??	bbrewer03	96-98	4	August 26th, 2006 08:14 AM

All times are GMT -4. The time now is 07:37 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.