[06RedfireGT]

Originally Posted by qwik48r i thought Motive made FRPP gears... good job though.

FRPP sells Motive gears but the true FRPP gears have an "A" at the end of the part number.

Originally Posted by zangus Hey Redfire, good post! I was wondering if you heard of or if anyone on here has the K&N CAI? I was thinking of getting one. Is it total crap? 1. Cold air intake* - This will give your vastly increased throttle response, and a good bit more power. Don't look at anything else but C&L, JLT, or Steeda. Note- It is recommended that you purchase your CAI and a tuner at the same time.

Yes, the K&N is garbage. Stay away. If you can't afford it right now, save up for one of the intake and tuner packages. The K&N isn't even worth your time. C&L, JLT, or Steeda. That's it.

[qwik48r]

just spoke with Daniel Wright at Motive Gears, in Chicago, IL. He told me Motive makes ALL 8.8" Ford Racing Ring and Pinion sets from 3.55 to 4.56. He told me buying FRPP gears is redundant because they are Motives.

[qwik48r]

dunno... just what the guy said

[qwik48r]

and i'm looking at the 2008 ford racing catalog and i see what you mean about "A".. But there are "N" and "M" pn 3.55's,3.73's, and 4.10's. i can even see the ford branding on the end of the pinion.

[07stanggt]

Originally Posted by qwik48r and i'm looking at the 2008 ford racing catalog and i see what you mean about "A".. But there are "N" and "M" pn 3.55's,3.73's, and 4.10's. i can even see the ford branding on the end of the pinion.

Like redfire said, ending with a part number A they are made by ford, ending in part number M they are made by motive and are cheaper from frpp if you look at the price. The ones that end n, I remember seeing them but dont know what they are.

[qwik48r]

just clearing a misconception.. so the 3.55's and the 4.10's are made by ford.. and then there's another set of 4.10's made by motive and sold by ford as well as a set of 4.30's... the 3.73's have a "N" so who the makes them?

[qwik48r]

motive makes the 3.73's from ford...i'll be damn

[06RedfireGT]

Hmm. I'd like to know what the N means.

[07stanggt]

Originally Posted by qwik48r motive makes the 3.73's from ford...i'll be damn

Somone told me richmond makes some gears for them. Maybe thats it. I just got 3.73s and 4.10s from Richmond.

[06RedfireGT]

At least Richmond is a quality gear, unlike Motive.

[qwik48r]

Video of Bluecajun 11.91 @ 113 - Photobucket - Video and Image Hosting

in the defense on Motive, this is a buddy's truck he runs a set of 4.10's from motive... truck get's beat on severelly and has gone 11's alot. thats a 8.5 gm rear also, known for their weakness. this truck only has a small cam and a 150 shot, drag SLICKS

[06RedfireGT]

The problem with motive is they whine. Always do. Very rarely do you get a set that doesn't.

[petyweestraw]

Yeah I know but in the pics they look way short.But I guess when installed you dont see that at all.I need to look for a pic.

[EfylSetaf]

Originally Posted by qwik48r just spoke with Daniel Wright at Motive Gears, in Chicago, IL. He told me Motive makes ALL 8.8" Ford Racing Ring and Pinion sets from 3.55 to 4.56. He told me buying FRPP gears is redundant because they are Motives.

He probably meant Motive makes the entire range of gears for Ford from 3.55 to 4.56. that doesn't mean all Ford gears from 3.55 to 4.56 are made by Motive.

It's not just common practice in manufacturing to have multiple suppliers for parts, it's a requirement for risk management. What would happen to Ford if Motive's plant got flooded by molasses and they couldn't get gears to Ford for two months? Ford would have to get another supplier up and running real quick. And real quick in manufacturing always means 200-300% more expensive than just quick.

That's exactly what happened to Ericsson in the cellphone market a few years back - one supplier for both Ericsson and Nokia. That supplier's plant burnt to the ground and only Nokia had a backup supplier. Ericsson never recovered from that in that particular industry.

[qwik48r]

all gears whine if they arent set up right... and will whine unless you set the perfect pattern (i.e. middle of the face on the coast/drive sides).. i like the whole 3.90's whine crock of shit... say your pattern is too low, on deacceleration you'll get a whine because the pinion is in the gear to much...

[EfylSetaf]

Wonder if the new surfacing Ford has for the 3.73s reduces whine at all?

"New manufacturing technology utilizing a Face Hob Process which features a single pass pinion tooth machining operation compared to a conventional three pass process for machining. CNC cut and lapped gear teeth. Higher strength and better quality gears are produced with the Face Hob Process. NOTE: These new gears look a little different, the gear teeth are cut on a different angle and the ring gear has a bevel on the back of the gear."

[qwik48r]

straight cut... or the more helical the shape of the gear, the more whine... BUT helical cut gears are stronger by all means.. thats why race car tranny's whine so much... i personally love the sound lol thats just me.. i'd set mine up little tight on purpouse just to get alittle whine. richmonds are goooood gears... aac are good too if they're around. strange, really good. but richmond has a set that 6lbs lighter than their normal offering.

[EfylSetaf]

Originally Posted by qwik48r straight cut... or the more helical the shape of the gear, the more whine... BUT helical cut gears are stronger by all means.. thats why race car tranny's whine so much... i personally love the sound lol thats just me.. i'd set mine up little tight on purpouse just to get alittle whine. richmonds are goooood gears... aac are good too if they're around. strange, really good. but richmond has a set that 6lbs lighter than their normal offering.

6 lbs? Wow, big difference for such a comparatively small part.

[qwik48r]

theyre only available in 9" ford right now... i hear different rears are in the works

[libtec193]

yeah im new with this whole thing....i know my way around it tho....but thanks for the suggestions