Forums at Modded Mustangs
Home Register FAQ Members List Calendar Blogs Garage Gallery Search Today's Posts Mark Forums Read


Go Back   Forums at Modded Mustangs > Mustang Forums > Modular Mustangs > 2005+

Discussing Spydershaft!!!! in the 2005+ Forum. I finally got the Spydershft installed, not only is there a noticeable power difference, on ...

       

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

 
LinkBack Thread Tools
Old May 8th, 2008, 12:17 PM   #1
Newbie
 
 
Join Date: Jul 2007
Location: Ottawa Ontario, Canada
Posts: 18
Default

Spydershaft!!!!


I finally got the Spydershft installed, not only is there a noticeable power difference, on top of that almost all of the driveline slop has dissapeared .

There is only one thing, driving around at around 75-80MPH, I feel a slight vibration(I mean you have to be thinking about it to feel it) but as I start going faster the vibration increases, not by much but it is more noticeable. I am still at stock ride height, do you guys think that I am going to have to get a adjustable UCA to get rid of it?
__________________
Mineral Gray 2005 Mustang GT

K&N CAI
FRPP 4.10 Gears
Spydershaft
Flowmaster AT
Hurst Billet Plus Shifter
SCT Custom Tune
BMR adj. panhard bar
Roush hood scoop
 
Old May 8th, 2008, 12:26 PM   #2
Regular
 
2007 Mustang GT
Faster than a prius
 
Join Date: Sep 2007
Posts: 469
Default

some people have the vibration, some dont. Mine has a little extra, but its not too bad even though i'm lowered. Welcome to the shaft club.
__________________
black 07 GT, jlt2 cai, sct2 brenspeed 93 octane tune, spydershaft, triax, magnaflow catted x,steeda axleback, tokico dspecs, steeda sport springs, steeda adj. panhard bar/ brace, steeda adj front swaybar, rear swaybar with billet endlinks
 
Old May 8th, 2008, 12:28 PM   #3
May 08 ROTM
 
Emay's Avatar
 
2007 Mustang GT
 
Join Date: Oct 2006
Location: Look over your shoulder
Posts: 2,052
Default

Very possible, spydershafts are not prone to any out of balance issues, could be a pinion angle issue which the adj uca would cure. Without actually measuring the angle, it's a guess to your fix.
 
Old May 8th, 2008, 12:45 PM   #4
Regular
 
Stkjock's Avatar
 
2006 Vert
12.05 @ 115.7
 
Join Date: Feb 2007
Posts: 179
Default

could also be a phasing issue. you may want to index the shaft and rotate it 180* to see if that helps and then adjust in smaller increments from there.
__________________
06 GT- 4000lb Rowing machine



http://img519.imageshack.us/img519/2285/stkjockqp4.jpg

12.05 @ 115.7 1.69 60'
 
Reply



Thread Tools


Threads Similar to: Spydershaft!!!!
Thread Thread Starter Forum Replies Last Post
3.73 gears and spydershaft cost questyoonays walkerman180 2005+ 14 March 30th, 2008 02:50 PM
Spydershaft questions 06GTMustang89 2005+ 1 March 14th, 2008 02:32 PM
SpyderShaft... 1FastFox 2005+ 4 January 15th, 2008 03:19 PM
Spydershaft Rubbing On Tri-ax Shifter 05mustang_kb_charged 2005+ 6 December 29th, 2007 10:41 PM
spydershaft Bhblondguy The Clubhouse 31 October 27th, 2007 04:29 AM


All times are GMT -4. The time now is 06:04 PM.
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company.
Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.