![]() | ![]() | |||||||||||
| ||||||||||||
|
|||||||
Discussing FRPP cams!!!!! in the 2005+ Forum. oh i see...you want more idle than the comps give ya.... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
|
|
LinkBack | Thread Tools |
|
|
#41 |
|
Hardcore Enthusiast
07 Mustang GT 5 Speed
Join Date: Nov 2007
Location: Red Deer Alberta...COME GET A TASTE!
Posts: 2,625
|
oh i see...you want more idle than the comps give ya.
|
|
|
#42 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
Nothing wrong with the world bro. Its a performance issue. 3 vavles and 4 vavles for that matter just dont want to lope like that. You can make them but there is a cost. power.
Bad part about it is your car will sound freaking bad ass, so the people you can take wont run you and the ones that do run you will probably have monsters sitting under the hood. ![]() Think about this im makeing as much power up top and more down low then the bbr stage I car with springs, retainers and ported heads. yea the car has a lopey sound, but my car would clean that cars clock with like 5 grand less in parts and labor. But im with you dude. Who doesnt like this sound. Tease you a little more.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#43 |
|
Enthusiast
2005 Mustang GT
Join Date: Feb 2008
Location: Detroit
Posts: 957
|
Motherfuker I want that sound NOW!!!
|
|
|
#44 |
|
Regular
2007 Mustang GT
13.37@105
Join Date: Mar 2008
Location: Buna, Texas
Posts: 481
|
calm your ass down tribaltek, we will get there eventually lol
__________________
Bassani O/R X pipe Bassani Axle Backs C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst Short Throw custom grind Comp Cams (thanks to RADMUSTANGS) 13.37 @ 105 on stock tires W/O cams, shifter, or intake Bassani Crew Member #3 |
|
|
#45 | |
|
Hardcore Enthusiast
2001 mustang gt
Join Date: Sep 2007
Location: lehigh acres, fl
Posts: 1,003
|
__________________
mods: tb and plenum, cold air intake, ebaich lowering kit, flow weld in, custom o/r x, RAM HDX Clutch and unknown chip v1 s trim For sell 450 plus shipping, need rebuild |
|
|
|
#46 |
|
Regular
2007 Mustang GT
13.37@105
Join Date: Mar 2008
Location: Buna, Texas
Posts: 481
|
im not too sure about an 01, but i know they do not make those cams for it.....i have heard alot of talk about comp 270s and something like a VT stage 2 or something, but dont quote me on any of that.........
__________________
Bassani O/R X pipe Bassani Axle Backs C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst Short Throw custom grind Comp Cams (thanks to RADMUSTANGS) 13.37 @ 105 on stock tires W/O cams, shifter, or intake Bassani Crew Member #3 |
|
|
#47 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
there are nsr cams for 01s? or are you talking about frpp hot rod cams?
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#48 |
|
Hardcore Enthusiast
2001 mustang gt
Join Date: Sep 2007
Location: lehigh acres, fl
Posts: 1,003
|
the bbr st2. i dont haave youtube at work, so i cant see the vid, but my supercharger is going on my car pretty soon(when i get it) and i want the lopey sound with a good gain with the supercharger. i was looking at comp 270's becase they can go n/a and fi
__________________
mods: tb and plenum, cold air intake, ebaich lowering kit, flow weld in, custom o/r x, RAM HDX Clutch and unknown chip v1 s trim For sell 450 plus shipping, need rebuild Last edited by lilmarc1988 : May 12th, 2008 at 03:36 PM. |
|
|
#49 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
if you want comp cams let me know i'll give you a price. The 270 is good. the lopey sound with your 2 vavle is not an issue. you can get that with any big cam.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#50 |
|
Hardcore Enthusiast
2001 mustang gt
Join Date: Sep 2007
Location: lehigh acres, fl
Posts: 1,003
|
cheapest ive seen was 515 for the comp 270's. whats your price on em??
__________________
mods: tb and plenum, cold air intake, ebaich lowering kit, flow weld in, custom o/r x, RAM HDX Clutch and unknown chip v1 s trim For sell 450 plus shipping, need rebuild |
|
|
#51 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
I'll call and get one for you.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#52 |
|
Hardcore Enthusiast
2001 mustang gt
Join Date: Sep 2007
Location: lehigh acres, fl
Posts: 1,003
|
thanks
__________________
mods: tb and plenum, cold air intake, ebaich lowering kit, flow weld in, custom o/r x, RAM HDX Clutch and unknown chip v1 s trim For sell 450 plus shipping, need rebuild |
|
|
#53 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
alright dude. Finally i talked to the engineers. They are working on it for us. They had a couple of sets they tested already. Then said they will call me tomorrow with some specs and numbers.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#54 |
|
Regular
2007 Mustang GT
13.37@105
Join Date: Mar 2008
Location: Buna, Texas
Posts: 481
|
do they have their own test engines or something?? how does all that work?
__________________
Bassani O/R X pipe Bassani Axle Backs C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst Short Throw custom grind Comp Cams (thanks to RADMUSTANGS) 13.37 @ 105 on stock tires W/O cams, shifter, or intake Bassani Crew Member #3 |
|
|
#55 |
|
Hardcore Enthusiast
07 Mustang GT 5 Speed
Join Date: Nov 2007
Location: Red Deer Alberta...COME GET A TASTE!
Posts: 2,625
|
its classified.
|
|
|
#56 |
|
Regular
2007 Mustang GT
13.37@105
Join Date: Mar 2008
Location: Buna, Texas
Posts: 481
|
shut up procharger lol............i wanna know what these things sound like!! dang it 07stanggt you got me all worked up now im ready to drop money down that i dont even have yet!!!!! but i gotta have somebody let me listen to them or someone give me their word on them b4 i buy into it..................................grrrrrrrrr im gettin anxious
__________________
Bassani O/R X pipe Bassani Axle Backs C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst Short Throw custom grind Comp Cams (thanks to RADMUSTANGS) 13.37 @ 105 on stock tires W/O cams, shifter, or intake Bassani Crew Member #3 |
|
|
#57 | |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
Does comp have their own test engines? Yea dude they use computer simulations first and then test engines. Your dealing with the big boys now. They test hundreds of cams for our engines. They know some people like the sound, but with the grinds they tested with a lot of lope they just dont make power or even lose power. The guy said he will get me something for you but it will have minimal power gains, but he said he will give you a the sound. hopefully tomorrow he can come up with some power numbers and we'll go from there. We talked a little bit about some specs.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
|
#58 |
|
Authorized Vendor
Join Date: Mar 2007
Location: Ellicott City, MD
Posts: 3,562
|
oh if comp tells you they chop then they chop. Maybe he can give me a sound clip. They have sound clips on their site for other cams.
__________________
352rwhp, 332rwtq 12.65 @112.39 new vid ![]() .
|
|
|
#59 |
|
Regular
2007 Mustang GT
13.37@105
Join Date: Mar 2008
Location: Buna, Texas
Posts: 481
|
the video of a stage 4 comp on youtube sounds good, so they can compare them to those if they cant get a sound clip, more choppy, less choppy, etc.............as long as i dont lose power i will be fine with them.
__________________
Bassani O/R X pipe Bassani Axle Backs C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst Short Throw custom grind Comp Cams (thanks to RADMUSTANGS) 13.37 @ 105 on stock tires W/O cams, shifter, or intake Bassani Crew Member #3 |
|
|
#60 |
|
Hardcore Enthusiast
07 Mustang GT 5 Speed
Join Date: Nov 2007
Location: Red Deer Alberta...COME GET A TASTE!
Posts: 2,625
|
I would rather have ones that sound like electric motors and make gobs of power
|
![]() |
| Thread Tools | |
|
|
Threads Similar to: FRPP cams!!!!!
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| frpp cams/does this car look pink or is it me? | 07stanggt | 2005+ | 14 | May 8th, 2008 11:57 AM |
| FRPP Cams | rickles512 | Parts | 1 | April 25th, 2008 01:37 PM |
| FRPP Hot rod cams | 05roush0090 | 2005+ | 15 | March 24th, 2008 01:27 PM |
| frpp | 07gtmustang | 2005+ | 5 | March 7th, 2008 11:28 AM |
| P.I. Cams Cams Cams Cams Lol Sorry About That | 96GtGoodz | 96-98 | 4 | December 14th, 2007 09:42 AM |