Redfire S197 Rims

thumperer · May 11th, 2008, 10:21 PM

Originally Posted by TheUNZippee!

I hate to sound boring, Heather, but I love the factory 18" aluminum wheels we have. I'm with Rags on this one; I say keep the wheels for now and drop it an inch or so.

Does anybody make a reasonable replica of the factory chromed (aluminum?) 18's that are a little bit wider and take the pony center cap? I want to put at least a 275/40/18 in the back and thay need to match the front.

Heather · May 11th, 2008, 10:26 PM

Originally Posted by silverstang

graduated when i did!!!! pretty cool, not may Class Of 2007 stangers' on here.........

haha true true.

Originally Posted by thumperer

Does anybody make a reasonable replica of the factory chromed (aluminum?) 18's that are a little bit wider and take the pony center cap? I want to put at least a 275/40/18 in the back and thay need to match the front.

Is this what you are talkin about?

menace07 · May 11th, 2008, 11:14 PM

I think its beautiful as is, and i dont say that often. Red, I like that pic of the redfire with the pentar wheels...they actually look awesome on there imo

1FUN4RD · May 11th, 2008, 11:29 PM

I think your car looks HOT as is.. I wouldnt swap out those wheels. Dropping it an 1 & 1/2 would make it look even hotter!!

06RedfireGT · May 12th, 2008, 12:04 AM

Originally Posted by menace07

I think its beautiful as is, and i dont say that often. Red, I like that pic of the redfire with the pentar wheels...they actually look awesome on there imo

I know. Those would be a serious consideration if I were to get wheels.

Heather · May 12th, 2008, 11:01 AM

okay my lovely's!!

I am ordering a Eibach Pro Kit this week to lower the stang!

And thank ya'll for your kind words!

2006GTARPD3 · May 12th, 2008, 11:06 AM

Class of 2005 ftw!

psycho bob · May 12th, 2008, 12:29 PM

the real question is will you be doing the work yourself for the spring swap. now that is where the real fun starts. a woman that works on her own car. i unlike most so far am quite against keeping stock wheels. they are way to narrow. if you would like to screw with people you could always have your rears widened so you still look stock, but you can put some real meat back there. that would be the only option for keeping stockers.

evan · May 12th, 2008, 07:13 PM

i call your rims if you get new ones!!

06RedfireGT · May 12th, 2008, 07:53 PM

Originally Posted by Heather

okay my lovely's!!

I am ordering a Eibach Pro Kit this week to lower the stang!

And thank ya'll for your kind words!

Get this instead.

BMR 05-07 GT Lowering Package [LP001] - $495.95

Double the price but it comes with everything to do it right.

07BlkGT · May 12th, 2008, 08:17 PM

+1 on the bmr package

thumperer · May 12th, 2008, 09:16 PM

Originally Posted by Heather

haha true true.

Is this what you are talkin about?

Yep, thats the ones I have. I need to find that wheel in an 18x9.

Heather · May 12th, 2008, 11:10 PM

Thats too expensive.

Also, Bob, I won't being doing them by myself.
I have a few friends who will be helping me.

psycho bob · May 13th, 2008, 04:19 AM

as long as you get your hands dirty. learn that toy you have then you won't ever have to depend on someone else to do it for you. that and when they tell you something is wrong you will have a better working knowledge of whether they are bs'in you or not

06VistaGT · May 14th, 2008, 01:01 AM

+1 on trying to do it yourself. I figured out a bunch of stuff by doing it on my own, took a while, but I got it done. BMR lowering kit would be the best way to go, but if too pricey then look at the FRPP springs too.

killermach1 · May 15th, 2008, 09:34 AM

I agree, leave it, drop it get exhaust and intake etc once those are done look at wheels but once you look I like the black center/chrome lip combo like the foose wheels on that GT/CS that redfire showed a pic of. You will be surprised at what a difference a drop of 1.5 inches does for the look of the car, I know I was.

Emay · May 15th, 2008, 10:02 AM

Originally Posted by psycho bob

the real question is will you be doing the work yourself for the spring swap. now that is where the real fun starts. a woman that works on her own car. i unlike most so far am quite against keeping stock wheels. they are way to narrow. if you would like to screw with people you could always have your rears widened so you still look stock, but you can put my meat back there.

fixed

1FastFox · May 15th, 2008, 11:39 AM

I love those chrome bullets. I think they really add to the old muscle car look the S197s have to them...

Wow Emay, you must be in a good mood today to bless us with a wisecrack...

Emay · May 15th, 2008, 11:59 AM

not done often huh? I got nothin good goin on, still in limbo with ford as my part is not here.. Lookin like it may not be till next week..

AnimalCrackers · May 15th, 2008, 12:04 PM

If you're bored, you can come work on my car, I'll supply all you can drink!

May 11th, 2008, 11:14 PM	#23
menace07 Regular Join Date: Sep 2007 Posts: 348	I think its beautiful as is, and i dont say that often. Red, I like that pic of the redfire with the pentar wheels...they actually look awesome on there imo __________________ black 07 GT, jlt2 cai, sct2 brenspeed 93 octane tune, spydershaft, triax, magnaflow catted x,steeda axleback, tokico dspecs, steeda sport springs, steeda adj. panhard bar/ brace, steeda adj front swaybar, rear swaybar with billet endlinks

May 11th, 2008, 11:29 PM	#24
1FUN4RD Enthusiast 2007 smartinor Tungsten Grey Join Date: Feb 2008 Location: CENTRAL IOWA Posts: 545	I think your car looks HOT as is.. I wouldnt swap out those wheels. Dropping it an 1 & 1/2 would make it look even hotter!! __________________ Originally Posted by ChrisJ If the erection last over 4 hours...Call more women...

May 12th, 2008, 11:01 AM	#26
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: Miss Berry Posts: 648	okay my lovely's!! I am ordering a Eibach Pro Kit this week to lower the stang! And thank ya'll for your kind words! __________________ Mustang GT/CS Club: Founder Reps always welcome

May 12th, 2008, 12:29 PM	#28
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 1,825	the real question is will you be doing the work yourself for the spring swap. now that is where the real fun starts. a woman that works on her own car. i unlike most so far am quite against keeping stock wheels. they are way to narrow. if you would like to screw with people you could always have your rears widened so you still look stock, but you can put some real meat back there. that would be the only option for keeping stockers. __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, Tokico D-specs, BMR LCA's, Adj. Panhard bar and support, Steeda Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets for the track. 12.86 in the 1/4 so far.

May 12th, 2008, 08:17 PM	#31
07BlkGT Regular 2007 Mustang GT Join Date: Dec 2007 Location: NC Posts: 481	+1 on the bmr package __________________ 20" Helo 834's, Eibach prokit, slp's, Hurst billet, 315's on the back. Got a long ways to go http://www.radmustangs.com/ Hurst Crew Member # 15

May 12th, 2008, 07:13 PM	#29
evan Regular Join Date: Apr 2008 Posts: 53	i call your rims if you get new ones!!

May 12th, 2008, 11:10 PM	#33
Heather Enthusiast 2007 Mustang GT/CS Join Date: Oct 2007 Location: Miss Berry Posts: 648	Thats too expensive. Also, Bob, I won't being doing them by myself. I have a few friends who will be helping me. __________________ Mustang GT/CS Club: Founder Reps always welcome

May 13th, 2008, 04:19 AM	#34
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 1,825	as long as you get your hands dirty. learn that toy you have then you won't ever have to depend on someone else to do it for you. that and when they tell you something is wrong you will have a better working knowledge of whether they are bs'in you or not __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, Tokico D-specs, BMR LCA's, Adj. Panhard bar and support, Steeda Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets for the track. 12.86 in the 1/4 so far.

May 14th, 2008, 01:01 AM	#35
06VistaGT Hardcore Enthusiast 2006 Mustang GT Join Date: Oct 2007 Location: Fayetteville, NC Posts: 1,491	+1 on trying to do it yourself. I figured out a bunch of stuff by doing it on my own, took a while, but I got it done. BMR lowering kit would be the best way to go, but if too pricey then look at the FRPP springs too. __________________ -C+L Street intake -SCT X-Calibrator2 tuner w/Brenspeed tunes -Kooks LT headers w/catted X-pipe -Steeda Pulleys -MAC axlebacks Please leave rep for helpful info.

May 15th, 2008, 09:34 AM	#36
killermach1 Regular Join Date: Jul 2007 Posts: 232	I agree, leave it, drop it get exhaust and intake etc once those are done look at wheels but once you look I like the black center/chrome lip combo like the foose wheels on that GT/CS that redfire showed a pic of. You will be surprised at what a difference a drop of 1.5 inches does for the look of the car, I know I was. __________________ 2007 Tungsten Grey Premium GT Mods (so far): Steeda Tri-Ax, Pypes Violator Cat Back, Pypes Off-Road X Pipe, C&L Racer + SCT from Brenspeed, BMR Lowering Kit Coming Soon: FRPP 4.10 Gears, Steeda UDPs, Steeda Billet Charge Motion Plates

May 15th, 2008, 11:59 AM	#39
Emay Hardcore Enthusiast 2007 Mustang GT Join Date: Oct 2006 Location: Look over your shoulder Posts: 1,596	not done often huh? I got nothin good goin on, still in limbo with ford as my part is not here.. Lookin like it may not be till next week.. __________________ Cardomain Page: http://www.cardomain.com/ride/2531254

May 15th, 2008, 12:04 PM	#40
AnimalCrackers Regular 2007 Mustang GT 13.761@104.76 Join Date: Jul 2007 Location: Kansas City Posts: 423	If you're bored, you can come work on my car, I'll supply all you can drink! __________________ Pypes midpipe crew C&L True flow intake, Pypes o/r H pipe, FRPP stingers, Bama 93 race tune, 20x8.5" FR500 Black Chrome, Nitto NT555 255/35/20, Shelby Hood Pins, Vortech T-trim supercharger coming soon Reps always welcome!

Threads Similar to: Redfire S197 Rims
Thread	Thread Starter	Forum	Replies	Last Post
This ones for redfire......	blackhavok	2005+	10	March 24th, 2008 02:16 PM
redfire	tsp_2177	The Clubhouse	6	March 21st, 2008 11:39 PM
Redfire	8t6gt	The Clubhouse	12	November 10th, 2007 12:44 AM
redfire needs..	MSO	The Clubhouse	61	September 29th, 2007 08:56 PM
s197 best looking 18 inch rims?	greentea	2005+	32	August 17th, 2007 09:46 PM

All times are GMT -4. The time now is 06:04 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.