Eibach pro kit with Tokico HP's

ydur · May 12th, 2008, 09:07 PM

Has anyone had any trouble when assembling the front struts with this set up? On the stockers the spring was tight and secure on the strut, but I had a bit of play when I assembled the tokicos and Eibachs. The spring seemed loose and moved.

Now I've had it all installed a month or so and I notice that they're pretty noisy up front. It's almost like a thunking noise when I go over any rough road. Any ideas? I replaced the upper strut mounts when upgrading and it's not a popping noise like I hear alot of people mention, but more of an all around thunking like everything's loose (which it's not b/c everything's been torqued to spec).

Anyone else experience this?

07stanggt · May 12th, 2008, 10:54 PM

the spring should not move. or seem loose. you sure its put together right.

psycho bob · May 13th, 2008, 04:34 AM

i had one of my tokico d-specs go bad very quickly. unfortunately the adjuster had rusted in place and i messed it up trying to get it to move after breaking the adjustment tool off in it. i put the stocker struts back on and had no more noise. i'll be ordering the front d-specs again as they are very good. i just happened to get a bad one.

ydur · May 13th, 2008, 08:52 AM

I know I put them together properly. Kinda hard to mess that up.

I guess I'll have to rip it all apart this weekend and check it out.

psycho bob · May 13th, 2008, 09:31 AM

at least it's a pretty simple job to do by yourself.

ydur · May 13th, 2008, 09:58 AM

I have to take the tires off to put my new rims on anyway, so no biggie. Just hope I could find the problem and fix it

07stanggt · May 13th, 2008, 10:57 AM

Who did you buy the from and if you sent me a pic maybe I could help you. I just did mine. Yea have the ends of the springs in that lip right?

May 12th, 2008, 09:07 PM	#1
ydur Regular 2007 Mustang GT 13.52@102.4mph Join Date: Jan 2008 Location: Woodbridge, NJ Posts: 52	Eibach pro kit with Tokico HP's Has anyone had any trouble when assembling the front struts with this set up? On the stockers the spring was tight and secure on the strut, but I had a bit of play when I assembled the tokicos and Eibachs. The spring seemed loose and moved. Now I've had it all installed a month or so and I notice that they're pretty noisy up front. It's almost like a thunking noise when I go over any rough road. Any ideas? I replaced the upper strut mounts when upgrading and it's not a popping noise like I hear alot of people mention, but more of an all around thunking like everything's loose (which it's not b/c everything's been torqued to spec). Anyone else experience this?

May 12th, 2008, 10:54 PM	#2
07stanggt Authorized Vendor Join Date: Mar 2007 Location: Ellicott City, MD Posts: 3,562	the spring should not move. or seem loose. you sure its put together right. __________________ 352rwhp, 332rwtq 12.65 @112.39 new vid http://s275.photobucket.com/albums/j...ent=NEWEST.flv www.radmustangs.com .

May 13th, 2008, 04:34 AM	#3
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 1,795	i had one of my tokico d-specs go bad very quickly. unfortunately the adjuster had rusted in place and i messed it up trying to get it to move after breaking the adjustment tool off in it. i put the stocker struts back on and had no more noise. i'll be ordering the front d-specs again as they are very good. i just happened to get a bad one. __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, Tokico D-specs, BMR LCA's, Adj. Panhard bar and support, Steeda Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets for the track. 12.86 in the 1/4 so far.

May 13th, 2008, 09:31 AM	#5
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 1,795	at least it's a pretty simple job to do by yourself. __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, Tokico D-specs, BMR LCA's, Adj. Panhard bar and support, Steeda Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets for the track. 12.86 in the 1/4 so far.

May 13th, 2008, 10:57 AM	#7
07stanggt Authorized Vendor Join Date: Mar 2007 Location: Ellicott City, MD Posts: 3,562	Who did you buy the from and if you sent me a pic maybe I could help you. I just did mine. Yea have the ends of the springs in that lip right? __________________ 352rwhp, 332rwtq 12.65 @112.39 new vid http://s275.photobucket.com/albums/j...ent=NEWEST.flv www.radmustangs.com .

May 13th, 2008, 08:52 AM	#4
ydur Regular 2007 Mustang GT 13.52@102.4mph Join Date: Jan 2008 Location: Woodbridge, NJ Posts: 52	I know I put them together properly. Kinda hard to mess that up. I guess I'll have to rip it all apart this weekend and check it out.

May 13th, 2008, 09:58 AM	#6
ydur Regular 2007 Mustang GT 13.52@102.4mph Join Date: Jan 2008 Location: Woodbridge, NJ Posts: 52	I have to take the tires off to put my new rims on anyway, so no biggie. Just hope I could find the problem and fix it

Threads Similar to: Eibach pro kit with Tokico HP's
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Pro Kit	03GT_Hybrid	99-04	20	January 19th, 2008 12:10 PM
Eibach Pro kit	03GT_Hybrid	99-04	6	January 9th, 2008 08:51 PM
Eibach: Sportline or Pro-kit?	RAGEman	99-04	21	December 8th, 2007 03:18 AM
eibach pro kit	Blk01ponyGT	99-04	5	October 10th, 2007 10:02 PM
eibach pro kit or h&r lowering kit for my 00' v6 stang??	scrapdaddy jr.	Suspension	2	February 4th, 2007 04:22 AM

All times are GMT -4. The time now is 11:24 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.