corner lights

1Nasty05 · July 6th, 2008, 11:01 PM

Im planning on gettin clear or black cornor lights and i was wonder from ppl that have installed them do you have to remove the bumper to do this or can you just get under the car and do it??
Thanks,
Dustin

texas_mustang · July 6th, 2008, 11:08 PM

ive heard that its much easier to remove the bumper

but some people just take off the fender lining

ROUSH STAGE II · July 6th, 2008, 11:18 PM

I removed the fender liner and it took about 20 minutes total.

texas_mustang · July 6th, 2008, 11:19 PM

anyone seen the euro corners?

ROUSH STAGE II · July 6th, 2008, 11:41 PM

I don't care for the Euro stuff too much.

1Nasty05 · July 6th, 2008, 11:44 PM

yea iv seen the euros they are ok... i just want the all black housing ones without the orange reflectors in them... and thanks for the info

texas_mustang · July 6th, 2008, 11:48 PM

haha rep is always accepted

and yea, euros look kinda gay now that i look at em. all black is a lot better lookin

stanglifemike · July 7th, 2008, 02:28 AM

Originally Posted by ROUSH STAGE II

I removed the fender liner and it took about 20 minutes total.

+1

stanglifemike · July 7th, 2008, 02:33 AM

Heres a couple shots of mine

texas_mustang · July 7th, 2008, 03:01 AM

that looks sick!!! you get em off ebay?

stanglifemike · July 7th, 2008, 03:02 AM

yep, 45 dollars I think

texas_mustang · July 7th, 2008, 03:05 AM

badass. any problems yet?

stanglifemike · July 7th, 2008, 03:08 AM

none, fitment was perfect

texas_mustang · July 7th, 2008, 03:11 AM

damn, now im gonna have to buy them

did they come with bulbs? and did you seal em before you put em on?

stanglifemike · July 7th, 2008, 03:25 AM

no bulbs included
I didnt have to seal anything, unbox them, put in the bulbs, install

texas_mustang · July 7th, 2008, 03:27 AM

and will stock bulbs work okay?

i thought for it to be DOT legal you needed either clear bulbs with amber lenses or amber bulbs with clear lenses

stanglifemike · July 7th, 2008, 03:33 AM

I just put the stock bulbs back in. They are suppose to be amber when they light up. I just prefer to not have the orange light up at night

texas_mustang · July 7th, 2008, 03:36 AM

yea man. i think im gonna order some now. but i think im gonna go clear because ive got a vista blue car with chrome rims and a chrome billet grill

07torchgt · July 8th, 2008, 11:12 AM

I put the black ones in I got from Blue Oval Industries... They are the ones that don't have a reflector... I think they match the black housings of the headlights... Fitment was perfect and went on throught the fender liners in less than 20 minutes...

stanglifemike · July 8th, 2008, 11:26 AM

Originally Posted by 07torchgt

I put the black ones in I got from Blue Oval Industries... They are the ones that don't have a reflector... I think they match the black housings of the headlights... Fitment was perfect and went on throught the fender liners in less than 20 minutes...

What was the price?
Mine dont have the reflectors either, but they have them available on Ebay.

July 6th, 2008, 11:01 PM	#1
1Nasty05 Banned 05 Redfire GT Join Date: Jan 2008 Location: Linden VA Posts: 396	corner lights Im planning on gettin clear or black cornor lights and i was wonder from ppl that have installed them do you have to remove the bumper to do this or can you just get under the car and do it?? Thanks, Dustin

July 6th, 2008, 11:08 PM	#2
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	ive heard that its much easier to remove the bumper but some people just take off the fender lining __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 6th, 2008, 11:18 PM	#3
ROUSH STAGE II Enthusiast 2005 Turbonetics Baby!!! Join Date: Jul 2007 Location: Mauriceville, Texas Posts: 593	I removed the fender liner and it took about 20 minutes total. __________________ Turbonetics baby!!!

July 6th, 2008, 11:19 PM	#4
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	anyone seen the euro corners? __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 6th, 2008, 11:41 PM	#5
ROUSH STAGE II Enthusiast 2005 Turbonetics Baby!!! Join Date: Jul 2007 Location: Mauriceville, Texas Posts: 593	I don't care for the Euro stuff too much. __________________ Turbonetics baby!!!

July 6th, 2008, 11:44 PM	#6
1Nasty05 Banned 05 Redfire GT Join Date: Jan 2008 Location: Linden VA Posts: 396	yea iv seen the euros they are ok... i just want the all black housing ones without the orange reflectors in them... and thanks for the info

July 6th, 2008, 11:48 PM	#7
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	haha rep is always accepted and yea, euros look kinda gay now that i look at em. all black is a lot better lookin __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 7th, 2008, 02:33 AM	#9
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,208	Heres a couple shots of mine __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips RadMustangs Store

July 7th, 2008, 03:01 AM	#10
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	that looks sick!!! you get em off ebay? __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 7th, 2008, 03:02 AM	#11
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,208	yep, 45 dollars I think __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips RadMustangs Store

July 7th, 2008, 03:05 AM	#12
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	badass. any problems yet? __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 7th, 2008, 03:08 AM	#13
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,208	none, fitment was perfect __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips RadMustangs Store

July 7th, 2008, 03:11 AM	#14
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	damn, now im gonna have to buy them did they come with bulbs? and did you seal em before you put em on? __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 7th, 2008, 03:25 AM	#15
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,208	no bulbs included I didnt have to seal anything, unbox them, put in the bulbs, install __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips RadMustangs Store

July 7th, 2008, 03:27 AM	#16
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	and will stock bulbs work okay? i thought for it to be DOT legal you needed either clear bulbs with amber lenses or amber bulbs with clear lenses __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

Threads Similar to: corner lights
Thread	Thread Starter	Forum	Replies	Last Post
F/s Clear Corner Headlights	HTK241	Exterior	0	April 13th, 2008 11:46 PM
What Do You Think (Blacked Out Corner Lights)	RhadCundell	The Clubhouse	9	December 25th, 2007 05:38 PM
Worst rally corner ever...	Fryrice	Videos	17	November 3rd, 2007 10:18 PM
Changing the front corner lights......Question?	Bossman	2005+	44	September 22nd, 2007 06:29 PM
2006 GT Exhaust and front corner lights...	Bossman	Exhaust	0	December 7th, 2006 12:20 PM

All times are GMT -4. The time now is 08:21 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

July 7th, 2008, 03:33 AM	#17
stanglifemike MM Fanatic 06 GT & 98 GT Join Date: Dec 2006 Location: Douglasville, GA Posts: 3,208	I just put the stock bulbs back in. They are suppose to be amber when they light up. I just prefer to not have the orange light up at night __________________ 98 GT: Accufab, Steeda, BBk, Mac, FlowMaster, Moser, Ford Racing, American Racing, Nitto, Eibach, SCT, FPS 06 GT: JLT, SCT, FRPP/Borla, Pypes, Steeda, BamaChips RadMustangs Store

July 7th, 2008, 03:36 AM	#18
texas_mustang Hardcore Enthusiast 2007 4.0L Mustang Join Date: Dec 2006 Location: Austin, Texas Posts: 1,770	yea man. i think im gonna order some now. but i think im gonna go clear because ive got a vista blue car with chrome rims and a chrome billet grill __________________ Texas Mustang Club FOUNDING MEMBER FRPP Shocks/ Struts, FRPP Springs, BMR Adj. Panhard bar, Che LCAs, LCA relocation brackets, Eibach Front/Rear swaybars, Steeda upper strut mounts, pypes o/r h pipes, bbk headers, bbk intake, 18" bullitts, KDWs

July 8th, 2008, 11:12 AM	#19
07torchgt Regular Join Date: Nov 2007 Posts: 174	I put the black ones in I got from Blue Oval Industries... They are the ones that don't have a reflector... I think they match the black housings of the headlights... Fitment was perfect and went on throught the fender liners in less than 20 minutes...