Guys i need help: Short Block opinions

silverstang · July 7th, 2008, 09:28 PM

well i hate to say this, but i MIGHT be in need of a short block guys, i wont go into details about why, thats not important right now...........I am going to diagnose the car and if all comes to worse, its getting a short block.........If i cant talk ford into warrantying this for me, i will be buying a racing assembly..........my question is which is the best on the market??? im on a budget, but i do not want "cheap" crap...........and i eventually plan to go all out, so i need an assembly that can handle over 800 hp. Im not sure if im going FI or spray, most likely FI.........what are you guys running (short block wise) and what prices am i looking at for a good setup?

mustangrebuilder · July 7th, 2008, 10:11 PM

give mmr a call. they will help you out alot.

they alot of different set up's and they are really good.

they have a 2200 hp mustang.

tribaltek · July 7th, 2008, 10:22 PM

I know a lot of folks like Livernois and MMR. I suggest going over to s197forum(dot)com and reading up there on what folks are doing. Those guys are making serious power on serious builds.

forensicsteve · July 7th, 2008, 10:22 PM

My car has the MMR 5L stroker model 950 (rated at 950 rwhp). It's setup for a turbo along with their stage II heads/cams. Performs well under stress (20 lbs of boost). My only experience is with MMR. I am well satisfied but cannot make a comparison with any other built block. Can't remember exact price but thinking it was around $6500 with heads/cams and some other misc extras???

fullboogie · July 7th, 2008, 10:25 PM

Does anyone use CHP or Bennett? They used to be the bomb - wondering if they still deliver the goods.

2006greyGT · July 7th, 2008, 10:33 PM

I am having mine custom built at a local speed shop... I don't know if this is the right way to go or not but I didn't want to have to buy a new block and heads if mine were good enough to build..

Doc8224 · July 7th, 2008, 10:37 PM

Originally Posted by 2006greyGT

I am having mine custom built at a local speed shop... I don't know if this is the right way to go or not but I didn't want to have to buy a new block and heads if mine were good enough to build..

Thats the best route for the money if u have a little down time. If its a good shop then just get a forged rotating assembly and use your stock block. If the heads and cams are still good then you shouldn't need to touch them unless you want too. You will have alot less invested for the same amount of power handling if you do it that way. The big question is did you loose oil pressure? if so make sure you inspect the cams and cam journals. Thats what happend when mine went.

bkid · July 8th, 2008, 02:50 AM

MMR is the best for the money.

psycho bob · July 8th, 2008, 05:17 AM

i also plan on getting an mmr. i hear larry_h is pretty good at the s197forum also

05mustang_kb_charged · July 8th, 2008, 08:12 AM

+1 for Larry_H, he built my shortblock and I can't complain because I sent him a block to build and he told me it would take him 1 week (5 days) to build and he would send it back that next monday...he got the block on a friday and the next friday he was calling me to tell me it was on it's way back. Larry_H is a Modular Ford Expert..

2006greyGT · July 9th, 2008, 08:35 PM

my problem is I am like a kid in a candy store in a speed shop... pretty much yes'ed everything they suggested...

the only things I am not replacing in the block and the heads.. but it is taking a hella long time... I am getting ready to make my second payment since it has been there.. paying for no car really sucks ass.. especially a vert in the summertime.... I know I know.... quit my crying...

05mustang_kb_charged · July 10th, 2008, 10:45 AM

haha, I paid about 3 years of car notes on a Z28 that I blew up 3 times with nitrous, went through 6- 4L60E transmissions, 3 rearends-1 pinion gear broke, 2- carriers broke, and 2 driveshafts....bought the car in 2001 with 70,000 miles and sold it in 2006 with 81,500 miles

mswift5 · July 10th, 2008, 08:49 PM

I was leaning toward MMR until I read this thread. Now I am not sure what I want to do.

It's official, got screwed by MMR - ModularFords.com

05stanggta · July 10th, 2008, 09:10 PM

livernois has some shortblocks rated to 1000hp. New - Livernois Motorsports - Browsing Store

July 7th, 2008, 09:28 PM	#1
silverstang Enthusiast 2007 Mustang GT 12.72@108 Join Date: Mar 2008 Location: Buna, Texas Posts: 771	Guys i need help: Short Block opinions well i hate to say this, but i MIGHT be in need of a short block guys, i wont go into details about why, thats not important right now...........I am going to diagnose the car and if all comes to worse, its getting a short block.........If i cant talk ford into warrantying this for me, i will be buying a racing assembly..........my question is which is the best on the market??? im on a budget, but i do not want "cheap" crap...........and i eventually plan to go all out, so i need an assembly that can handle over 800 hp. Im not sure if im going FI or spray, most likely FI.........what are you guys running (short block wise) and what prices am i looking at for a good setup? __________________ Bassani O/R X and axlebacks C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst shifter-J&M LCAs-Eibach Pro custom grind Comp Cams (thanks to RADMUSTANGS) 312rwhp (on a Mustang dyno, stock intake) Bassani Crew Member #3

July 7th, 2008, 10:22 PM	#3
tribaltek Hardcore Enthusiast 2005 Mustang GT 13.02@107 Join Date: Feb 2008 Location: Detroit Posts: 1,471	I know a lot of folks like Livernois and MMR. I suggest going over to s197forum(dot)com and reading up there on what folks are doing. Those guys are making serious power on serious builds. __________________ '05 GT, 5spd, Black, JLT, 93 Race, 4.10's, FRPP Hot Rod Cams, UDP, MGW, OBX LT's & O/R-H, Bassani Race, Prothanes, HIDs, 18" Bullits, SHR Louvers, Black Billet Grille, GT500 Spoiler, Seq. Tails Cammed Crew #1 RADMUSTANGS Store

July 7th, 2008, 10:22 PM	#4
forensicsteve Enthusiast 10.3 1/4 ET Join Date: Sep 2006 Location: eye of Gustav Posts: 562	My car has the MMR 5L stroker model 950 (rated at 950 rwhp). It's setup for a turbo along with their stage II heads/cams. Performs well under stress (20 lbs of boost). My only experience is with MMR. I am well satisfied but cannot make a comparison with any other built block. Can't remember exact price but thinking it was around $6500 with heads/cams and some other misc extras??? __________________ 06GT, PH 76mm turbo, MMR 5.0 stroker, turbo cams/heads, FB Perf 3 speed 4r70w, 9" rear, GT500 pumps, 2 single KB BAPs 6.5 @ 105 -1/8, 50 shot 10.31 @ 124 -1/4, 50 shot, lifted 6.6 @ 103 - 1/8 & 10.42 @ 129.98 - 1/4 (no nitrous)

July 7th, 2008, 10:33 PM	#6
2006greyGT Enthusiast 2006 Satin Silver GT 12.039@114.64 Join Date: Aug 2007 Location: KC Posts: 663	I am having mine custom built at a local speed shop... I don't know if this is the right way to go or not but I didn't want to have to buy a new block and heads if mine were good enough to build.. __________________ 2.6l KENNE BELL 100% forged bal and blu Stroked to 298 / Ported and polished heads Long tube/pro chamber / stage 3 clutch 8 rib/65 lb injectors 20" Weld Racing Wheels meth injection CDC AGR Spoiler- clear coat bra D/S rotors / MGW Short Throw

July 8th, 2008, 05:17 AM	#9
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 2,386	i also plan on getting an mmr. i hear larry_h is pretty good at the s197forum also __________________ I just wanna go fast and I don't have enough stuff to do it.

July 7th, 2008, 10:11 PM	#2
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 957	give mmr a call. they will help you out alot. they alot of different set up's and they are really good. they have a 2200 hp mustang.

July 7th, 2008, 10:25 PM	#5
fullboogie Regular 2008 GT Join Date: Jun 2008 Location: Houston Posts: 108	Does anyone use CHP or Bennett? They used to be the bomb - wondering if they still deliver the goods.

July 8th, 2008, 02:50 AM	#8
bkid Regular 2006 Mustang GT 14.024 Join Date: May 2008 Location: ALBUQUERQUE Posts: 112	MMR is the best for the money.

July 8th, 2008, 08:12 AM	#10
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT Dyno Racer Join Date: Mar 2007 Location: LSU Country Posts: 2,137	+1 for Larry_H, he built my shortblock and I can't complain because I sent him a block to build and he told me it would take him 1 week (5 days) to build and he would send it back that next monday...he got the block on a friday and the next friday he was calling me to tell me it was on it's way back. Larry_H is a Modular Ford Expert.. __________________ A Couple Bolt-Ons and GOOD Air 613 rwhp and 534 rwtq on 15 psi. and 17 degrees of timing F/I Crew Member #1 KENNE BELL Crew Member #1 Click Here>>http://www.twinscrewracing.com/ http://www.radmustangs.com/

July 9th, 2008, 08:35 PM	#11
2006greyGT Enthusiast 2006 Satin Silver GT 12.039@114.64 Join Date: Aug 2007 Location: KC Posts: 663	my problem is I am like a kid in a candy store in a speed shop... pretty much yes'ed everything they suggested... the only things I am not replacing in the block and the heads.. but it is taking a hella long time... I am getting ready to make my second payment since it has been there.. paying for no car really sucks ass.. especially a vert in the summertime.... I know I know.... quit my crying... __________________ 2.6l KENNE BELL 100% forged bal and blu Stroked to 298 / Ported and polished heads Long tube/pro chamber / stage 3 clutch 8 rib/65 lb injectors 20" Weld Racing Wheels meth injection CDC AGR Spoiler- clear coat bra D/S rotors / MGW Short Throw

July 10th, 2008, 10:45 AM	#12
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT Dyno Racer Join Date: Mar 2007 Location: LSU Country Posts: 2,137	haha, I paid about 3 years of car notes on a Z28 that I blew up 3 times with nitrous, went through 6- 4L60E transmissions, 3 rearends-1 pinion gear broke, 2- carriers broke, and 2 driveshafts....bought the car in 2001 with 70,000 miles and sold it in 2006 with 81,500 miles __________________ A Couple Bolt-Ons and GOOD Air 613 rwhp and 534 rwtq on 15 psi. and 17 degrees of timing F/I Crew Member #1 KENNE BELL Crew Member #1 Click Here>>http://www.twinscrewracing.com/ http://www.radmustangs.com/

July 10th, 2008, 08:49 PM	#13
mswift5 Newbie Join Date: May 2007 Posts: 26	I was leaning toward MMR until I read this thread. Now I am not sure what I want to do. It's official, got screwed by MMR - ModularFords.com

July 10th, 2008, 09:10 PM	#14
05stanggta Regular 2005 Mustang GT 13.76@101 Join Date: Dec 2007 Location: Twin Falls, ID Posts: 174	livernois has some shortblocks rated to 1000hp. New - Livernois Motorsports - Browsing Store __________________ http://www.myspace.com/05stanggta Silver Vehicle Club Member #1 REtarD HATERS CLUB CO-FOUNDER MEMBER #3 [Silver Branch Founder]

Threads Similar to: Guys i need help: Short Block opinions
Thread	Thread Starter	Forum	Replies	Last Post
Short block is done	CamD 2v	99-04	17	June 17th, 2008 03:10 PM
long block or short block?	jRoush	5.0 Mustangs	26	January 26th, 2008 05:35 AM
short block differs from a long block how?	mustangfox9091	5.0 Mustangs	35	September 26th, 2007 10:57 PM
short block vs long block?	caintcatchmyGT	96-98	3	July 22nd, 2007 09:47 PM
MMR Short Block vs DSS Short Block	superbeef1000	99-04	6	September 20th, 2006 04:49 AM

All times are GMT -4. The time now is 02:29 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.