Cam install

usafimj · August 6th, 2008, 12:30 AM

K. I'm going to be installing the Stage II NSR Comp Cams next weekend. Can't this weekend cuz I'll be at Ozzfest 2008 in DFW....

I have the Cams on hand, cam phaser bolts are on the way, the valve spring compressor & timing chain wedge should be on the way also. What else should I get before I tackle this beast. I'll also be buying a fresh quart of oil to lubricate everything before installation.
Thanks

Brain Fart: On the cam boxes one has LH & the other has RH. Is the LH the passenger side if your staring at the motor from the front or is the LH the driver side when sitting in the car. vice versa for the RH

EfylSetaf · August 6th, 2008, 12:55 AM

How much did the tools run ya and where'd you source them from? (valve spring compressor & chain wedge)

usafimj · August 6th, 2008, 01:02 AM

Originally Posted by EfylSetaf

How much did the tools run ya and where'd you source them from? (valve spring compressor & chain wedge)

Came out to be around $238 or so.
SPX Motorcraft | Welcome to SPX Motorcraft

EfylSetaf · August 6th, 2008, 01:40 AM

Originally Posted by usafimj

Came out to be around $238 or so.
SPX Motorcraft | Welcome to SPX Motorcraft

*whistles* wow -- would you consider renting them out for a weekend?

blackhavok · August 6th, 2008, 03:01 AM

Good luck bro!!!

05mustang_kb_charged · August 6th, 2008, 09:36 AM

Get beer!!! and Good Luck

Srt2stang725 · August 6th, 2008, 10:12 AM

Originally Posted by usafimj

K. I'm going to be installing the Stage II NSR Comp Cams next weekend. Can't this weekend cuz I'll be at Ozzfest 2008 in DFW....

I have the Cams on hand, cam phaser bolts are on the way, the valve spring compressor & timing chain wedge should be on the way also. What else should I get before I tackle this beast. I'll also be buying a fresh quart of oil to lubricate everything before installation.
Thanks

Brain Fart: On the cam boxes one has LH & the other has RH. Is the LH the passenger side if your staring at the motor from the front or is the LH the driver side when sitting in the car. vice versa for the RH

I hate that they cant just write passengar or driver side, its so hard to remember which is which....but i think...dont quote me on it....its from sitting in the car or looking at the car from the back...hence the driver side is left and the passengar side is right...once again im not 100% can someone else verify? Anyway good luck with the install and post up some vids when its all said and done!

05mustang_kb_charged · August 6th, 2008, 10:55 AM

Answer

the left side is the driver side in the US

Answer

the left side is on the left when sitting in the car faceing forwards!

the right and left sides of an automobile or the engine are determined faceing forward from rear of object as in cross mounted engine stand in back of engine and face towards the front of engine the left bank will be on the front bumper side while the right bank will be on the cowl side of auto

07 STROKER · August 6th, 2008, 11:32 AM

left is drivers side.

90Stang · August 6th, 2008, 04:49 PM

Do you have the part #'s on the tools needed, because im thinking about getting cams and doing the install with a buddy or two.

05mustang_kb_charged · August 6th, 2008, 05:01 PM

Originally Posted by 90Stang

Do you have the part #'s on the tools needed, because im thinking about getting cams and doing the install with a buddy or two.

on this website SPX Motorcraft | Welcome to SPX Motorcraft

Valve Spring Compressor - 303-1039
Timing Chain Locking Tool - 303-1175

usafimj · August 6th, 2008, 06:22 PM

Originally Posted by EfylSetaf

*whistles* wow -- would you consider renting them out for a weekend?

I'll rent out the tools to anyone who needs them. You can just send me what I paid in shipping to send them to you. That is all. Much cheaper than $238

usafimj · August 6th, 2008, 07:56 PM

with the new cams going in next weekend hopefully. Should I leave the rev limit alone or have doug @ bamachips raise it. If so, what should I ask him to raise it to.

bkid · August 6th, 2008, 10:26 PM

Originally Posted by usafimj

with the new cams going in next weekend hopefully. Should I leave the rev limit alone or have doug @ bamachips raise it. If so, what should I ask him to raise it to.

Doug has a tune for the cams your installing. Did you buy them from him?

usafimj · August 7th, 2008, 04:20 PM

No but I got the JLT/tuner combo from him so the tunes are free anyways

AwsmBullitt · August 7th, 2008, 04:24 PM

If the cams didn't come with new cover gaskets make sure you get those as well.

usafimj · August 7th, 2008, 04:27 PM

the stock cam cover gaskets are rubber and are reusable. Only thing I have to watch out for is taking them off slowly making sure I don't tear it. Other than that I'm good

Kobie · August 7th, 2008, 04:27 PM

I think Doug might have to modify the cam timing for the phasers.

APER · August 7th, 2008, 04:41 PM

hey Doug from Bamachips just emailed me what HP i should expect with the cam tune he said he dynoed one last week and gained 25-32 rwhp across the entire RPM range thats pretty good. i already have to tune just have to get the nsr cams and install them. i read a thread about the engine that blew up and ask Doug if he had heard anything about that . He said he didn't and that he doesn't mess with the cam timing so his tune is safe and the people are satisfied with the tune with no problems.

06trgt · September 8th, 2008, 06:08 PM

Originally Posted by usafimj

I'll rent out the tools to anyone who needs them. You can just send me what I paid in shipping to send them to you. That is all. Much cheaper than $238

Are you still renting these out? What's the easiest way to get a hold of you?
Thanks.

August 6th, 2008, 12:30 AM	#1
usafimj MM Fanatic 2007 Ford Mustang GT 13.253 @ 106.96mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 4,432	Cam install K. I'm going to be installing the Stage II NSR Comp Cams next weekend. Can't this weekend cuz I'll be at Ozzfest 2008 in DFW.... I have the Cams on hand, cam phaser bolts are on the way, the valve spring compressor & timing chain wedge should be on the way also. What else should I get before I tackle this beast. I'll also be buying a fresh quart of oil to lubricate everything before installation. Thanks Brain Fart: On the cam boxes one has LH & the other has RH. Is the LH the passenger side if your staring at the motor from the front or is the LH the driver side when sitting in the car. vice versa for the RH __________________ Mods in garage Hurst Crew Member #13 Military Crew E-5 Last edited by usafimj : August 6th, 2008 at 12:34 AM.

August 6th, 2008, 12:55 AM	#2
EfylSetaf Hardcore Enthusiast 2008 Mustang GT Join Date: Nov 2007 Location: West [of] Chicago Posts: 1,923	How much did the tools run ya and where'd you source them from? (valve spring compressor & chain wedge) __________________ Experience is what you get when you didn't get what you wanted.

August 6th, 2008, 03:01 AM	#5
blackhavok Enthusiast 2006 Mustang GT 10.82@125.2 Join Date: Oct 2007 Location: McAllen, Texas Posts: 721	Good luck bro!!! __________________ www.RADMustangs.com www.s197Performance.com Bassani Crew Member #2 10 PSI 10.82 @ 125.2 1/4 6.87 @ 98.8 1/8 1.46 60' The 10 Second Daily Driver.... Ask me what I run on street tires! Check it out at myspacecom/havokdacarking

August 6th, 2008, 09:36 AM	#6
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,439	Get beer!!! and Good Luck __________________ A Couple Bolt-Ons and GOOD Air 690 rwhp and 550 rwtq on 21 psi. through a 4R70W F/I Crew Member #1 KENNE BELL Crew Member #1 My Personal Website Best Mustang Store on Internet

August 6th, 2008, 10:55 AM	#8
05mustang_kb_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,439	Answer the left side is the driver side in the US Answer the left side is on the left when sitting in the car faceing forwards! the right and left sides of an automobile or the engine are determined faceing forward from rear of object as in cross mounted engine stand in back of engine and face towards the front of engine the left bank will be on the front bumper side while the right bank will be on the cowl side of auto __________________ A Couple Bolt-Ons and GOOD Air 690 rwhp and 550 rwtq on 21 psi. through a 4R70W F/I Crew Member #1 KENNE BELL Crew Member #1 My Personal Website Best Mustang Store on Internet

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 6th, 2008, 11:32 AM	#9
07 STROKER MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: PA Posts: 7,482	left is drivers side. __________________ The MGW short throw shifter Its not just a shifter...It's a lifestyle!

August 6th, 2008, 04:49 PM	#10
90Stang Regular 2005 Mustang 12.9@109 Join Date: Jul 2006 Location: Oklahoma City Posts: 243	Do you have the part #'s on the tools needed, because im thinking about getting cams and doing the install with a buddy or two. __________________ C&L Trueflow Intake SystemPredatorEibach Pro KitBlack Bullitt'sMac LT headersO/R X-PipeDynomax BulletsHurst Comp Plus ShifterBAMACHIPS 93 Race TuneComp Thumpr Stage IIComp Phaser Limiters4.33 Gears*Lots of BMR suspension stuff

August 6th, 2008, 07:56 PM	#13
usafimj MM Fanatic 2007 Ford Mustang GT 13.253 @ 106.96mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 4,432	Rev Limit with the new cams going in next weekend hopefully. Should I leave the rev limit alone or have doug @ bamachips raise it. If so, what should I ask him to raise it to. __________________ Mods in garage Hurst Crew Member #13 Military Crew E-5

August 7th, 2008, 04:20 PM	#15
usafimj MM Fanatic 2007 Ford Mustang GT 13.253 @ 106.96mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 4,432	No but I got the JLT/tuner combo from him so the tunes are free anyways __________________ Mods in garage Hurst Crew Member #13 Military Crew E-5

August 7th, 2008, 04:24 PM	#16
AwsmBullitt Newbie 2008 Mustang Bullitt Join Date: Jul 2008 Location: Herriman, UT Posts: 8	If the cams didn't come with new cover gaskets make sure you get those as well. __________________ Why so serious?

August 7th, 2008, 04:27 PM	#17
usafimj MM Fanatic 2007 Ford Mustang GT 13.253 @ 106.96mph Join Date: Sep 2007 Location: Oklahoma City, Ok. Posts: 4,432	the stock cam cover gaskets are rubber and are reusable. Only thing I have to watch out for is taking them off slowly making sure I don't tear it. Other than that I'm good __________________ Mods in garage Hurst Crew Member #13 Military Crew E-5

August 7th, 2008, 04:27 PM	#18
Kobie Newbie 2007 GT Join Date: May 2008 Location: Phoenix, AZ Posts: 46	I think Doug might have to modify the cam timing for the phasers.

August 7th, 2008, 04:41 PM	#19
APER Regular 2005 Mustang GT Join Date: Sep 2006 Location: Abilene Posts: 157	dyno hey Doug from Bamachips just emailed me what HP i should expect with the cam tune he said he dynoed one last week and gained 25-32 rwhp across the entire RPM range thats pretty good. i already have to tune just have to get the nsr cams and install them. i read a thread about the engine that blew up and ask Doug if he had heard anything about that . He said he didn't and that he doesn't mess with the cam timing so his tune is safe and the people are satisfied with the tune with no problems. __________________ http://videos.streetfire.net/video/0...ust_143888.htm My mods: Comp NSR II's, JBA shorties, Pypes o/r H-pipe, Steeda axlebacks, Steeda UD, BBK TB, Steeda CAI, FRPP4.10, BMR panhard/LCA/Relo, Eibach springs, D-specs,Bama 91race/cam/4.10

Threads Similar to: Cam install
Thread	Thread Starter	Forum	Replies	Last Post
Cam and Intake Install	ModMustang97GT	96-98	2	July 11th, 2008 11:19 PM
Cam install ?'s	pfcbrook	99-04	12	February 29th, 2008 09:11 PM
cam install	95blueGT	94-95	4	October 12th, 2007 02:56 AM
99 3.8 cam w/spring install	mmvi	V6 Mustangs	5	April 24th, 2007 05:04 PM
V6 Cam install question	02ponypackage	V6 Mustangs	6	February 14th, 2007 02:20 PM

All times are GMT -4. The time now is 09:12 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

Cam install

Cam install

Rev Limit

dyno