new best time

silverstang · September 28th, 2008, 06:55 PM

hit up the track last night, got a new best time of 12.72 @ 108.............i want to run some low to mid 12s before the end of the season, what do you guys suggest as next mods?? what ticked me off was that was the very first pass at the track, every pass afterwards was 12.90s, the car seemed like it hooked up TOO good and bogged every time, and i had no way of putting more air in the tires (which im 99% sure is what i needed) i know i am capable of 12.60s with tire pressure corrected. but i need to know what you guys would do to help get me some low 12s N/A.............

black05stxjt · September 28th, 2008, 07:02 PM

good job bud, i think you need to just put a bottle in the car and go real fast!!!

silverstang · September 28th, 2008, 07:06 PM

hey we didnt get the first run on vid but we got some good vids of some of my other passes..............i'll put them up later but it will probly be next week sometimes

navyman8903 · September 28th, 2008, 07:45 PM

get a set of DR's or just get the street et mt from brenspeed Racing Tires and get some charge motion race plates from steeda, get the meziere electric water pump w/relay kit, and a spyder shaft and you will be in the low 12's.

chad05gt · September 28th, 2008, 07:48 PM

Nice times! Weather was SO nice last night!
Dammit... missed everyone at the damn track

07stanggt · September 28th, 2008, 08:23 PM

Good work man.

I think you already have DR's correct?

So maybe some lca and relo brackets, yes even though your not lowered.

What were you 60 foots times?

Not sure what price range your talking. Underdrive pulleys could get you some more power.

RStrick0352 · September 28th, 2008, 08:31 PM

Originally Posted by silverstang

and i had no way of putting more air in the tires N/A.............

I carry a little 12 volt air compressor you can get at wal mart with me every time. Weighs like 3 lbs, plugs in and does the job. Cheap too, you you check in on one.

mikey org gt500 · September 28th, 2008, 08:42 PM

Disconnect your front swaybar...Drag radials if u dont have already.... under drive pulleys and dump that clutch lol

06RedfireGT · September 28th, 2008, 10:12 PM

What was your 60'? What tires? Any suspension mods?

Jucostud · September 28th, 2008, 10:23 PM

Originally Posted by 07stanggt

Good work man.

I think you already have DR's correct?

So maybe some lca and relo brackets, yes even though your not lowered.

What were you 60 foots times?

Not sure what price range your talking. Underdrive pulleys could get you some more power.

he already has lca's and he is lowered.

silverstang · September 29th, 2008, 10:27 AM

i have LCAs and i am lowered, i run on MT streets already and i dump the clutch VERY hard lol..........looking for some more bolt on parts really.

07stanggt · September 29th, 2008, 10:31 AM

under drive pulleys?

07stanggt · September 29th, 2008, 10:32 AM

long tubes

07stanggt · September 29th, 2008, 10:32 AM

4.30s

or you could try k member, swaybar delete, a arms. I dont know how much you want to spend. any of that will help your times.

07stanggt · September 29th, 2008, 10:37 AM

driveshaft

TheUNZippee! · September 29th, 2008, 10:39 AM

mikey org gt500 · September 29th, 2008, 11:35 PM

Originally Posted by silverstang

i have LCAs and i am lowered, i run on MT streets already and i dump the clutch VERY hard lol..........looking for some more bolt on parts really.

lol Dumping the clutch FTW... maybe bump your gears up a notch, or try to loose some weight(k member, a arms ,battery in trunk)

ROUSH STAGE II · September 30th, 2008, 12:54 AM

Turn your traction controll off...haha!!! Congrats dude...it's been a long time coming.

Mickey · September 30th, 2008, 02:46 AM

That a boy

September 28th, 2008, 06:55 PM	#1
silverstang Enthusiast 2007 Mustang GT 12.70@109.89 Join Date: Apr 2008 Location: Buna, Texas Posts: 863	new best time hit up the track last night, got a new best time of 12.72 @ 108.............i want to run some low to mid 12s before the end of the season, what do you guys suggest as next mods?? what ticked me off was that was the very first pass at the track, every pass afterwards was 12.90s, the car seemed like it hooked up TOO good and bogged every time, and i had no way of putting more air in the tires (which im 99% sure is what i needed) i know i am capable of 12.60s with tire pressure corrected. but i need to know what you guys would do to help get me some low 12s N/A............. __________________ Bassani O/R X and axlebacks C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst shifter-J&M LCAs-Eibach Pro custom grind Comp Cams (thanks to RADMUSTANGS) 312rwhp (on a Mustang dyno, stock intake) Bassani Crew Member #3

September 28th, 2008, 07:02 PM	#2
black05stxjt Enthusiast 2005 GT 11.55@118.48 Join Date: Jan 2008 Location: Texas Posts: 639	good job bud, i think you need to just put a bottle in the car and go real fast!!! __________________ 12.52@108.23/ 11.55@118.48 100 SHOT

September 28th, 2008, 07:06 PM	#3
silverstang Enthusiast 2007 Mustang GT 12.70@109.89 Join Date: Apr 2008 Location: Buna, Texas Posts: 863	hey we didnt get the first run on vid but we got some good vids of some of my other passes..............i'll put them up later but it will probly be next week sometimes __________________ Bassani O/R X and axlebacks C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst shifter-J&M LCAs-Eibach Pro custom grind Comp Cams (thanks to RADMUSTANGS) 312rwhp (on a Mustang dyno, stock intake) Bassani Crew Member #3

September 28th, 2008, 07:45 PM	#4
navyman8903 Regular 2006 MUSTANG GT 13.2@104.22 Join Date: Feb 2008 Location: maryland. lexington park Posts: 498	get a set of DR's or just get the street et mt from brenspeed Racing Tires and get some charge motion race plates from steeda, get the meziere electric water pump w/relay kit, and a spyder shaft and you will be in the low 12's. __________________ airaid intake,steeda tb spacer/charge motion plates,hd motor mounts, adj. panhard bar/brace,spyder drive shaft,bassani longtubes,catted x-pipe, and race axle backs, hurst short throw,BRENSPEED 93 tune, Meziere Bassani Crew Member #5

September 28th, 2008, 07:48 PM	#5
chad05gt Regular Join Date: Apr 2008 Posts: 371	Nice times! Weather was SO nice last night! Dammit... missed everyone at the damn track __________________ http://www.youtube.com/watch?v=0r_8yTklKew <--12.60 @ 108 before heads/cams; 12.65 @ 114.23 after

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

September 28th, 2008, 08:23 PM	#6
07stanggt Authorized Vendor 2007 GT 12.40@114.55 Join Date: Mar 2007 Location: Ellicott City, MD Posts: 6,488	Good work man. I think you already have DR's correct? So maybe some lca and relo brackets, yes even though your not lowered. What were you 60 foots times? Not sure what price range your talking. Underdrive pulleys could get you some more power. __________________ http://s275.photobucket.com/albums/j...ntyRaceway.flv www.radmustangs.com

September 28th, 2008, 08:42 PM	#8
mikey org gt500 Regular Join Date: Sep 2007 Location: Englishtown NJ Posts: 74	Disconnect your front swaybar...Drag radials if u dont have already.... under drive pulleys and dump that clutch lol __________________ I wish I had my 93 cobra with no payments!!!!

September 28th, 2008, 10:12 PM	#9
06RedfireGT Captain Of Team Leg Hump 2006 Mustang GT In the 13's Join Date: Aug 2006 Location: I'm so badass I make medicine cry Posts: 10,247	What was your 60'? What tires? Any suspension mods? __________________ Bassani Crew Member #1 Better to be judged by 12 then carried by six.

September 29th, 2008, 10:27 AM	#11
silverstang Enthusiast 2007 Mustang GT 12.70@109.89 Join Date: Apr 2008 Location: Buna, Texas Posts: 863	i have LCAs and i am lowered, i run on MT streets already and i dump the clutch VERY hard lol..........looking for some more bolt on parts really. __________________ Bassani O/R X and axlebacks C&L 93 octane tune by Triangle Speed Shop FRPP 3.73 gears Hurst shifter-J&M LCAs-Eibach Pro custom grind Comp Cams (thanks to RADMUSTANGS) 312rwhp (on a Mustang dyno, stock intake) Bassani Crew Member #3

September 29th, 2008, 10:31 AM	#12
07stanggt Authorized Vendor 2007 GT 12.40@114.55 Join Date: Mar 2007 Location: Ellicott City, MD Posts: 6,488	under drive pulleys? __________________ http://s275.photobucket.com/albums/j...ntyRaceway.flv www.radmustangs.com

September 29th, 2008, 10:32 AM	#13
07stanggt Authorized Vendor 2007 GT 12.40@114.55 Join Date: Mar 2007 Location: Ellicott City, MD Posts: 6,488	long tubes __________________ http://s275.photobucket.com/albums/j...ntyRaceway.flv www.radmustangs.com

September 29th, 2008, 10:37 AM	#15
07stanggt Authorized Vendor 2007 GT 12.40@114.55 Join Date: Mar 2007 Location: Ellicott City, MD Posts: 6,488	driveshaft __________________ http://s275.photobucket.com/albums/j...ntyRaceway.flv www.radmustangs.com

September 30th, 2008, 12:54 AM	#18
ROUSH STAGE II Enthusiast 2005 Turbonetics Baby!!! Join Date: Jul 2007 Location: Mauriceville, Texas Posts: 775	Turn your traction controll off...haha!!! Congrats dude...it's been a long time coming. __________________ Turbonetics baby!!! 60' - 1.73 1/8 - 7.59 MPH - 94.62 1/4 - 11.743 MPH - 119.36 Race weight 3,770 #'s 3.55 gears

Threads Similar to: new best time
Thread	Thread Starter	Forum	Replies	Last Post
It's about time there is somebody who can drive on Pass Time	06RedfireGT	The Clubhouse	26	August 14th, 2008 05:41 PM
1/4 time	worlz08	5.0 Mustangs	6	May 27th, 2008 12:56 AM
It's Time	Youngin	The Clubhouse	9	March 21st, 2008 09:03 PM
1/4 Time	Bhblondguy	2005+	19	November 19th, 2007 08:07 AM
New member first time poster long time fan	kpmorris	New Members Introductions	14	August 20th, 2007 12:53 AM

All times are GMT -4. The time now is 04:44 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.