EiBach PRO Kit, should I?

jhbfour · June 10th, 2008, 11:28 PM

Yes, I want my Pro kit and dual exhaust installed correctly and have them not Void my Warranty.

Cheers!

jhbfour · June 11th, 2008, 01:50 AM

Yes!

myeleanor · June 11th, 2008, 02:26 AM

Originally Posted by jhbfour

Yes!

ok the shop is called Muscle Motors..they do amazing work. Theyre in Canoga Park. Check the site for deals..Muscle Motors Performance, Inc They do all my work..amazing work

jhbfour · June 11th, 2008, 03:46 AM

Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Bandit · June 15th, 2008, 11:01 AM

The Mustang Source Forums - View Single Post - Steeda Ultralite spring install complete!

The Mustang Source Forums - View Single Post - Steeda Ultralite spring install complete!

Here's a couple writeups by tacobill.It is exactly the same on our 4.0's except you probably have no rear sway bar in your way.

Originally,i had someone put my vogtland springs in,and kinda always regretted paying someone to do it.One of the only mods i did that,doh.

Now,this time around i did it myself so it is fresh on my mind.Make sure you rent the compressor kit for STRUT springs.I though i heard mention you could not need this,but just to be clear,you WILL unless you are nuts,lol.

The rear springs are cake to do,but the strut fronts are more involved and the stock springs that come out will need compressed pretty darn good in our cars to relieve the spring tension enough to avoid a dangerous result. An air compressor would be really helpful,lol,but a good amount of elbow grease compressing them works too.

Odds are,for a mild drop,your camber will be fine.I got just over an inch drop and never had uneven tire wear after 10,000 miles.

Threads Similar to: EiBach PRO Kit, should I?
Thread	Thread Starter	Forum	Replies	Last Post
Eibach Pro Kit	03GT_Hybrid	99-04	20	January 19th, 2008 12:10 PM
Eibach Pro kit	03GT_Hybrid	99-04	6	January 9th, 2008 08:51 PM
eibach pro kit	Blk01ponyGT	99-04	5	October 10th, 2007 10:02 PM
eibach sportline or pro kit	BlackIce	Suspension	2	February 23rd, 2007 04:39 AM
eibach pro kit or h&r lowering kit for my 00' v6 stang??	scrapdaddy jr.	Suspension	2	February 4th, 2007 04:22 AM

June 10th, 2008, 11:28 PM	#21
jhbfour Newbie Join Date: Oct 2007 Posts: 31	Yes, I want my Pro kit and dual exhaust installed correctly and have them not Void my Warranty. Cheers!

June 11th, 2008, 01:50 AM	#22
jhbfour Newbie Join Date: Oct 2007 Posts: 31	Yes!

June 11th, 2008, 03:46 AM	#24
jhbfour Newbie Join Date: Oct 2007 Posts: 31	Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

June 15th, 2008, 11:01 AM	#25
Bandit Regular Join Date: Nov 2006 Location: southern ohio Posts: 99	The Mustang Source Forums - View Single Post - Steeda Ultralite spring install complete! The Mustang Source Forums - View Single Post - Steeda Ultralite spring install complete! Here's a couple writeups by tacobill.It is exactly the same on our 4.0's except you probably have no rear sway bar in your way. Originally,i had someone put my vogtland springs in,and kinda always regretted paying someone to do it.One of the only mods i did that,doh. Now,this time around i did it myself so it is fresh on my mind.Make sure you rent the compressor kit for STRUT springs.I though i heard mention you could not need this,but just to be clear,you WILL unless you are nuts,lol. The rear springs are cake to do,but the strut fronts are more involved and the stock springs that come out will need compressed pretty darn good in our cars to relieve the spring tension enough to avoid a dangerous result. An air compressor would be really helpful,lol,but a good amount of elbow grease compressing them works too. Odds are,for a mild drop,your camber will be fine.I got just over an inch drop and never had uneven tire wear after 10,000 miles.

All times are GMT -4. The time now is 01:33 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.