mach 1...0-60 and 1/4 mile times

futureMACH1racer · February 6th, 2009, 11:07 PM

13.3@102mph bonestock Mach with 275 Nitto dr's and a Flowmaster Cat Back, and O/R H Pipe.

futureMACH1racer · February 6th, 2009, 11:09 PM

I wasn't the one driving, my father was driving my car.

03MachMe · February 6th, 2009, 11:11 PM

im hoping for 12s with just gears, midpipe, K&N FIPK, and some sticky ass tires

mrbigjeep · February 6th, 2009, 11:15 PM

8.2 should be good for 12's...

03MachMe · February 6th, 2009, 11:15 PM

yea thats what im thinking plus that was with a NASTY head wind

futureMACH1racer · February 6th, 2009, 11:21 PM

Should be able to 03MachMe

03MachMe · February 7th, 2009, 12:59 AM

we shall see hopefully in a few weeks

blue03mach1 · February 10th, 2009, 09:28 AM

2003 mach1 0-60mph in 4.6 seconds.

swervo · February 10th, 2009, 02:22 PM

With nothing more than a catback, I got 13.3. With a JLT RAI and offroad h-pipe, I got her down to 13.17 @107mph.

MIKE 04 GT · February 10th, 2009, 02:29 PM

Originally Posted by 03MachMe

fast....

+1 i wish i would have got the one i was looking at when i got my gt

'97'Cobra · February 10th, 2009, 06:22 PM

i wouldnt mind trading my car for a mach or termi. thats about it tho

cobraetti · February 10th, 2009, 07:43 PM

I would say those times are right a stock 01' cobra runs a 4.8 0-60

unlicensed to drive · February 12th, 2009, 05:15 PM

Are the 05-09 GT's as fast as 2003 Mach 1's? Only 5 HP difference...

AzureMach1 · February 12th, 2009, 11:12 PM

I ran a 13.2 with 2.00 60' time and i have a K&N CAI, Shifter, UDP

03MachMe · February 13th, 2009, 12:32 AM

Originally Posted by mustangfan123

Are the 05-09 GT's as fast as 2003 Mach 1's? Only 5 HP difference...

stock for stock from what i have seen the mach is a tad faster. mainly because it is lighter. but there is plenty of arguments on this

unlicensed to drive · February 13th, 2009, 12:36 AM

Originally Posted by 03MachMe

stock for stock from what i have seen the mach is a tad faster. mainly because it is lighter. but there is plenty of arguments on this

Yeah, I'm guessing its a drivers race. My GT/CS is 302 at the rear wheels with intake,tune,mufflers,pullies,and charge motion delete plates. Next mod is longtubes, which brings in about 15-20rwhp.

February 6th, 2009, 11:07 PM	#21
futureMACH1racer MM's Junkyard Dog 2003 Jeep Wrangler Join Date: Sep 2007 Location: Earth mostly... Posts: 8,308	13.3@102mph bonestock Mach with 275 Nitto dr's and a Flowmaster Cat Back, and O/R H Pipe. __________________ "I drink a great deal. I sleep a little, and I smoke cigar after cigar. That is why I am in two-hundred-percent form." Winston Churchill

February 6th, 2009, 11:09 PM	#22
futureMACH1racer MM's Junkyard Dog 2003 Jeep Wrangler Join Date: Sep 2007 Location: Earth mostly... Posts: 8,308	I wasn't the one driving, my father was driving my car. __________________ "I drink a great deal. I sleep a little, and I smoke cigar after cigar. That is why I am in two-hundred-percent form." Winston Churchill

February 6th, 2009, 11:11 PM	#23
03MachMe Regular 2003 Mach 1 Mustang Join Date: Aug 2008 Location: N. Texas Posts: 313	im hoping for 12s with just gears, midpipe, K&N FIPK, and some sticky ass tires __________________ mostly stock 8.2@83 1/8th

February 6th, 2009, 11:15 PM	#24
mrbigjeep MM Fanatic 04 mustang gt SLOW Join Date: Apr 2008 Location: upstate sc Posts: 3,114	8.2 should be good for 12's... __________________ SLOW

February 6th, 2009, 11:15 PM	#25
03MachMe Regular 2003 Mach 1 Mustang Join Date: Aug 2008 Location: N. Texas Posts: 313	yea thats what im thinking plus that was with a NASTY head wind __________________ mostly stock 8.2@83 1/8th

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

February 6th, 2009, 11:21 PM	#26
futureMACH1racer MM's Junkyard Dog 2003 Jeep Wrangler Join Date: Sep 2007 Location: Earth mostly... Posts: 8,308	Should be able to 03MachMe __________________ "I drink a great deal. I sleep a little, and I smoke cigar after cigar. That is why I am in two-hundred-percent form." Winston Churchill

February 7th, 2009, 12:59 AM	#27
03MachMe Regular 2003 Mach 1 Mustang Join Date: Aug 2008 Location: N. Texas Posts: 313	we shall see hopefully in a few weeks __________________ mostly stock 8.2@83 1/8th

February 10th, 2009, 09:28 AM	#28
blue03mach1 Enthusiast Join Date: Jun 2007 Posts: 523	2003 mach1 0-60mph in 4.6 seconds.

February 10th, 2009, 02:22 PM	#29
swervo March 08 ROTM/May 10 ROTM '11 Grabber Blue GT Join Date: Feb 2006 Location: Jacksonville, NC /Hopefully SoCal next year Posts: 390	With nothing more than a catback, I got 13.3. With a JLT RAI and offroad h-pipe, I got her down to 13.17 @107mph. __________________ '11 Grabber Blue GT/ Bassani Catback

February 10th, 2009, 07:43 PM	#32
cobraetti Regular 2001 svt cobra no way (IRS) Join Date: Aug 2006 Location: goose creek,sc Posts: 304	I would say those times are right a stock 01' cobra runs a 4.8 0-60 __________________ Build #1249 MM New Edge Crew Member# 6

February 12th, 2009, 11:12 PM	#34
AzureMach1 Newbie Join Date: Jan 2009 Posts: 21	I ran a 13.2 with 2.00 60' time and i have a K&N CAI, Shifter, UDP

Threads Similar to: mach 1...0-60 and 1/4 mile times
Thread	Thread Starter	Forum	Replies	Last Post
1/8 mile times?	BlackSunshine	4V / SVT	23	June 30th, 2008 09:25 PM
my 1/4 mile times :D	BWAL	5.0 Mustangs	42	October 29th, 2007 08:20 PM
First 1/8 mile times	redracer	Drag	19	October 25th, 2007 07:16 PM
your 1/4 mile times	Bhblondguy	2005 - 2009	31	August 17th, 2007 12:05 PM
Can 1/8th mile times give est 1/4th times?	Nightstick	Drag	3	April 16th, 2006 10:20 PM

All times are GMT -4. The time now is 01:15 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2010, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.