m112 on v6

SleeperStang88 · April 23rd, 2009, 12:16 AM

hey cobra guys, so i have a few questions about the m112, i was thinking about puttin one on my 2000 v6 and they say it will add about 100rwhp/rwtq , now i am assuming that is stock pullies, what size are the stock pullies? and what kinda power increase do you see from a pully drop? i will have a fully built motor to hold the power and i will have supporting mods too, i am looking for about 400 to 450 rwhp, ive seen it done on turbo v6s and procharged 6ers but not an m112 thanks guys

forcefedcobra · April 28th, 2009, 04:56 PM

dont know about the 112 but the last time I was at the track there was a kid there that put an m90 from a thunderbird sc in his v6 stang

1StockGT · April 29th, 2009, 10:15 AM

The stock pulley pushed 8psi. I can't remember the size though. The smaller you go the more boost you get. I have a 2.76 on mine and it pushes 14psi. Technically I'm over spinning the blower, but it's got a Steig stage 4 port so that helps out.

Reloaded · April 29th, 2009, 02:30 PM

Stock pulley size is 3.65"

April 23rd, 2009, 12:16 AM	#1
SleeperStang88 Regular 2000 Mustang V6 need to run at track Join Date: Sep 2008 Location: Michigan Posts: 361 iTrader: 2 reviews	m112 on v6 hey cobra guys, so i have a few questions about the m112, i was thinking about puttin one on my 2000 v6 and they say it will add about 100rwhp/rwtq , now i am assuming that is stock pullies, what size are the stock pullies? and what kinda power increase do you see from a pully drop? i will have a fully built motor to hold the power and i will have supporting mods too, i am looking for about 400 to 450 rwhp, ive seen it done on turbo v6s and procharged 6ers but not an m112 thanks guys __________________ _____________________________________________ 4.2 H/C/I with LT headers, sitting on 315s

Threads Similar to: m112 on v6
Thread	Thread Starter	Forum	Replies	Last Post
My M112-V6 Build	plove71387	V6 Mustangs	148	November 1st, 2011 06:01 PM
M112 on a 2V! Yes you Can!!!!	ohcat68	99-04	14	May 2nd, 2008 10:16 AM
Eaton M112	rob3980	V6 Mustangs	8	April 22nd, 2008 01:36 AM
m112	mmvi	V6 Mustangs	34	March 5th, 2007 04:38 PM
My M112 / V6 Mustang	tomzac	V6 Mustangs	27	September 23rd, 2006 05:13 PM

April 28th, 2009, 04:56 PM	#2
forcefedcobra Enthusiast 2003 SVT Cobra Join Date: Nov 2008 Location: oklahoma Posts: 532 iTrader: 0 reviews	dont know about the 112 but the last time I was at the track there was a kid there that put an m90 from a thunderbird sc in his v6 stang

April 29th, 2009, 10:15 AM	#3
1StockGT Enthusiast 2003 Cobra Join Date: Nov 2005 Location: Newport News,VA Posts: 628 iTrader: 1 reviews	The stock pulley pushed 8psi. I can't remember the size though. The smaller you go the more boost you get. I have a 2.76 on mine and it pushes 14psi. Technically I'm over spinning the blower, but it's got a Steig stage 4 port so that helps out.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 04:43 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.