03 Sonic Blue Roush Cobra in the works

1FastFox · July 6th, 2009, 03:21 PM

You got it back yet? Damn, I would make those fuckers pay your payment this month if they keep it any longer...

RS22 · July 6th, 2009, 04:56 PM

Originally Posted by 1FastFox

You got it back yet? Damn, I would make those fuckers pay your payment this month if they keep it any longer...

SIGH. The shop called today and said everything has been shot and now they are just going to buff and polish it and then they have to reassemble the car. Sometime this week it will be ready.

And yes if I had monthly payments I'd make them pay it but I own the car outright. Bought this baby straight cash...

Lefty · July 6th, 2009, 05:17 PM

Originally Posted by RS22

SIGH. The shop called today and said everything has been shot and now they are just going to buff and polish it and then they have to reassemble the car. Sometime this week it will be ready.

And yes if I had monthly payments I'd make them pay it but I own the car outright. Bought this baby straight cash...

Nice,...now go to the shop right now and get spy pics. I VANT TO SEE!!!

AzSonicSnake · July 6th, 2009, 05:18 PM

RS22 · July 6th, 2009, 05:45 PM

LOL won't be much to see. He told me it would be easier for them to polish and buff the parts while not on the car to make sure no product gets stuck and left behind in the cracks and crevices.

For the mean time here's some pix of the car disassembled:

FYI I am getting new A-pillars because they had cracks in them. Apparently they were aftermarket parts put on the car from an incident I was not aware of when I bought the car....

AzSonicSnake · July 6th, 2009, 05:46 PM

she looks so nekkid!! haha. looking good though..

Reloaded · July 6th, 2009, 05:46 PM

You should drive it around like that! Weight reduction FTW!

RS22 · July 6th, 2009, 05:52 PM

Originally Posted by Reloaded

You should drive it around like that! Weight reduction FTW!

I'd run some crazy 1/4 times lol.

Lefty · July 6th, 2009, 07:39 PM

Originally Posted by Reloaded

You should drive it around like that! Weight reduction FTW!

RS22 · July 9th, 2009, 05:10 PM

Well the car is hopefully done this week. They are reassembling the car after buffing/polishing all parts. The only thing left to do is paint the flat black middle piece on the rear bumper and put the car back together.

Here's a few pix of the body parts painted and the new hood painted and installed.

This has been a long process but its going to be worth the wait.

Reloaded · July 9th, 2009, 06:49 PM

Sex-tastic! Glossy

RS22 · July 9th, 2009, 07:00 PM

RS22 · July 9th, 2009, 07:59 PM

The shop updated me again with more pix. They said some detail work needs to be done still on the side skirts and the rear valences, and they will put the flat black on the rear bumper soon.

Here's the pix:

I'm going to take off that grille emblem corral though. I like it better with just the pony.

Safi · July 9th, 2009, 08:01 PM

Simply amazing!! I'm in love

BTW, what tires are those?

Lefty · July 9th, 2009, 08:06 PM

^BF Goodrich KDW 2's.

OP - Can I haz?

Slow_Stang · July 9th, 2009, 08:06 PM

da da da dam! that thing is hot!

RS22 · July 9th, 2009, 11:49 PM

Originally Posted by Lefty

^BF Goodrich KDW 2's.

OP - Can I haz?

Oh they are sexy aren't they. I only had them like a week before the car went in the shop.

AzSonicSnake · July 9th, 2009, 11:59 PM

daaaaaayyyuuummmm!!!! looking mighty fine. i do agree that the coral around the pony must go. otherwise, looks good man. i totally dig it.

RS22 · July 10th, 2009, 12:04 AM

Originally Posted by AzSonicSnake

daaaaaayyyuuummmm!!!! looking mighty fine. i do agree that the coral around the pony must go. otherwise, looks good man. i totally dig it.

Thank you. Like I said I always wanted a roush but the power house of the cobra is just too much to pass up. It's coming together nicely and its well worth the wait. Now I'm like a kid on xmas eve waiting for my present.

TUGGER · July 10th, 2009, 12:05 AM

WOW, looks friggin gorgeous bro. Congrats. That car will be turning heads all day, correction breaking necks all day.

July 6th, 2009, 03:21 PM	#101
1FastFox MMs Official Playboy Only Time will tell... Join Date: Mar 2007 Location: Indiana Posts: 2,917	You got it back yet? Damn, I would make those fuckers pay your payment this month if they keep it any longer... __________________ There's no roof, no side glass, not even a radio. "That's the formula," said Carroll Shelby. "It's a massive motor in a tiny, lightweight car." Hmmm... Now theres some food for thought on a fun build.

July 6th, 2009, 05:18 PM	#104
AzSonicSnake May ROTM 2003 SVT Cobra 11.07@127 Join Date: Aug 2008 Location: North Phoenix,AZ Posts: 2,566	__________________ MM Cobra Club #25 My Autolog Profile HARDCORE CREW

July 6th, 2009, 05:45 PM	#105
RS22 Regular 2003 Mustang Cobra Join Date: Feb 2009 Location: East Bay, CA Posts: 122	LOL won't be much to see. He told me it would be easier for them to polish and buff the parts while not on the car to make sure no product gets stuck and left behind in the cracks and crevices. For the mean time here's some pix of the car disassembled: FYI I am getting new A-pillars because they had cracks in them. Apparently they were aftermarket parts put on the car from an incident I was not aware of when I bought the car.... __________________ 2003 SB Mustang Cobra \| MGW STS \| Spintech 333SCS mufflers \| MAC O/R H-pipe \| JLT CAI \| H&R Sport Springs \| MM Front Isos/Stock Rear Isos \| MM Caster Camber plates \| Spintech FLSFCs \| 18x9/10.5 Chrome Saleen Replicas \| S3 Roush kit

July 6th, 2009, 05:46 PM	#106
AzSonicSnake May ROTM 2003 SVT Cobra 11.07@127 Join Date: Aug 2008 Location: North Phoenix,AZ Posts: 2,566	she looks so nekkid!! haha. looking good though.. __________________ MM Cobra Club #25 My Autolog Profile HARDCORE CREW

July 9th, 2009, 05:10 PM	#110
RS22 Regular 2003 Mustang Cobra Join Date: Feb 2009 Location: East Bay, CA Posts: 122	Well the car is hopefully done this week. They are reassembling the car after buffing/polishing all parts. The only thing left to do is paint the flat black middle piece on the rear bumper and put the car back together. Here's a few pix of the body parts painted and the new hood painted and installed. This has been a long process but its going to be worth the wait. __________________ 2003 SB Mustang Cobra \| MGW STS \| Spintech 333SCS mufflers \| MAC O/R H-pipe \| JLT CAI \| H&R Sport Springs \| MM Front Isos/Stock Rear Isos \| MM Caster Camber plates \| Spintech FLSFCs \| 18x9/10.5 Chrome Saleen Replicas \| S3 Roush kit

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 9th, 2009, 07:00 PM	#112
RS22 Regular 2003 Mustang Cobra Join Date: Feb 2009 Location: East Bay, CA Posts: 122	__________________ 2003 SB Mustang Cobra \| MGW STS \| Spintech 333SCS mufflers \| MAC O/R H-pipe \| JLT CAI \| H&R Sport Springs \| MM Front Isos/Stock Rear Isos \| MM Caster Camber plates \| Spintech FLSFCs \| 18x9/10.5 Chrome Saleen Replicas \| S3 Roush kit

July 9th, 2009, 07:59 PM	#113
RS22 Regular 2003 Mustang Cobra Join Date: Feb 2009 Location: East Bay, CA Posts: 122	The shop updated me again with more pix. They said some detail work needs to be done still on the side skirts and the rear valences, and they will put the flat black on the rear bumper soon. Here's the pix: I'm going to take off that grille emblem corral though. I like it better with just the pony. __________________ 2003 SB Mustang Cobra \| MGW STS \| Spintech 333SCS mufflers \| MAC O/R H-pipe \| JLT CAI \| H&R Sport Springs \| MM Front Isos/Stock Rear Isos \| MM Caster Camber plates \| Spintech FLSFCs \| 18x9/10.5 Chrome Saleen Replicas \| S3 Roush kit

July 9th, 2009, 08:01 PM	#114
Safi MM's Resident Leghumper 2007 Mustang GT 14.6 for my rookie first run ass Join Date: Apr 2008 Location: Luke AFB Arizona Posts: 2,605	Simply amazing!! I'm in love BTW, what tires are those? __________________ Mods: AIRAID, GT500 spoiler, BMR springs, Adj Panhard Rod, Kooks Catback Exhaust....haha, wow I suck Military Crew E-4 (SrA) JAKE'S PIITB CREW MEMBER#2 LACEY'S TIOTB CREW: FOUNDER

July 9th, 2009, 08:06 PM	#115
Lefty MM's Most Laid Back '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 13,941	^BF Goodrich KDW 2's. OP - Can I haz? __________________ MM Cobra Club Co-Founder

July 9th, 2009, 08:06 PM	#116
Slow_Stang Regular 2002 Mustang GT, 5 speed 13.60@105 Join Date: Jul 2008 Location: waterford,wisconsin Posts: 169	da da da dam! that thing is hot! __________________ 1/4: 13.60 @ 105, 2.1 60' -old time Wisconsin BLOWS!! new times coming: with 4:10's,sub-frames,a/c delete tune, and intake manifold riding the fail shuttle all the way to loser moon whp:261 tq:301

July 9th, 2009, 11:59 PM	#118
AzSonicSnake May ROTM 2003 SVT Cobra 11.07@127 Join Date: Aug 2008 Location: North Phoenix,AZ Posts: 2,566	daaaaaayyyuuummmm!!!! looking mighty fine. i do agree that the coral around the pony must go. otherwise, looks good man. i totally dig it. __________________ MM Cobra Club #25 My Autolog Profile HARDCORE CREW

July 10th, 2009, 12:05 AM	#120
TUGGER Newbie 2003 SVT Cobra Vert Join Date: Jun 2007 Location: OR Posts: 36	WOW, looks friggin gorgeous bro. Congrats. That car will be turning heads all day, correction breaking necks all day. __________________ 2003 SVT Cobra Vert Magnaflow Catback, K&N CAI, 18" Replica Chrome Bullitts, Diablosport 91 Octane Performance

Threads Similar to: 03 Sonic Blue Roush Cobra in the works
Thread	Thread Starter	Forum	Replies	Last Post
WTB Sonic Blue trunk lid w/o 03 cobra wing	RS22	Exterior	6	May 6th, 2009 03:57 PM
03 Sonic Blue Stang	03FstStngKB	99-04	28	July 29th, 2008 05:21 AM
FS: Sonic Blue 92 Mustang GT	va cobra	For Sale	6	December 8th, 2007 08:23 AM
sonic blue gt 10k	stanged out	The Clubhouse	15	October 10th, 2007 07:10 PM
2003 Sonic Blue Whippled Cobra	MeZ	For Sale	21	October 1st, 2007 05:00 AM

All times are GMT -4. The time now is 09:48 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.